cs.SDNov 10, 2026

Spatio-Temporal Calibration of a Vehicle-Mounted Microphone Array for Autonomous Driving

Authors: Marvin Seegert, Richard Taupitz, Korbinian Moller, Johannes Betz

Organizations: Professorship of Autonomous Vehicle Systems and R. Taupitz with the Institute of Automotive Technology, TUM School of Engineering and Design, Technical University of Munich, 85748 Garching, Germany; Munich Institute of Robotics and Machine Intelligence (MIRMI).

Abstract

Microphones let an autonomous vehicle sense into areas its cameras and LiDAR cannot see, by picking up the sound that other traffic participants emit. Locating those sources and fusing them with the visual perception requires the microphone array to be calibrated and registered relative to the vehicle's other sensors. Existing calibration methods assume small, unobstructed indoor rigs, whereas a vehicle body casts an acoustic shadow that straight-line propagation cannot represent, and to our knowledge no calibration of an array distributed around a vehicle has been reported. We propose a pipeline that uses a balloon burst as a single cross-modal target, which the LiDAR locates in metric coordinates, every microphone hears as a sharp onset and a camera times. Each observation is weighted by its own timing variance, which discounts shadowed arrivals instead of discarding them and needs no model of the vehicle. On a full-size vehicle with eight microphones over a 4.9 m aperture, the held-out range residual of 6.37 cm approaches the 6.07 cm floor set by the onset timing noise, and the calibrated array tracks a moving source to within a few degrees of the vehicle's own LiDAR. A dozen bursts spread around the vehicle suffice, and spreading them matters more than adding more.

Figures & tables

Explore similar work

Nov 14, 2026

AcousticBEV: Acoustic BEV Object Localization for Intelligent Vehicles

Modern autonomous driving and driver assistance systems rely predominantly on cameras, radars and LiDARs for environmental perception. However, these modalities face different environmental limitations, including poor illumination for cameras and adverse weather for LiDAR. Acoustic sensing, particularly using microphone arrays, could provide complementary perception capabilities for autonomous driving, but has remained largely underexplored. In this work, we design a horizontally arranged microphone array that functions as the "ears" of a vehicle, enabling localization of nearby moving vehicles in a bird's-eye view (BEV) representation that captures both their relative direction and distance. Using this array, we collect a real-world driving dataset, AcousticScenes, which contains 2,117 static and 2,863 dynamic samples with synchronized spatial acoustic signals, LiDAR point clouds and 3D bounding box annotations. Building on this dataset, we propose AcousticBEV, a learning-based method for acoustic BEV object localization, which estimates the center locations of moving traffic participants in BEV from the microphone-array signals, conditioned on the ego vehicle's own speed. Experimental results demonstrate that AcousticBEV outperforms both classical signal-processing baselines and other learning-based methods, achieving F1 scores of 47.7±1.247.7 \pm 1.2% on "Easy" scenarios and 45.1±1.445.1 \pm 1.4% on "Difficult" cases. Our findings demonstrate that acoustic signals from a low-cost, vehicle-mounted microphone array can localize nearby moving vehicles in both azimuth and distance.
Nov 3, 2026

MiCaDe: Online LiDAR-Camera Miscalibration Change Detection for Autonomous Driving

Reliable multi-sensor perception in autonomous vehicles requires accurate calibration between cameras and LiDAR. However, calibration drift is often unavoidable in long-term deployments: vibrations, thermal effects, and minor mechanical shocks may alter the relative pose between sensors, leading to systematic errors in downstream fusion tasks. We propose MiCaDe (Miscalibration Change Detection), an online solution detecting when the extrinsic LiDAR-camera calibration parameters are no longer accurate by means of sequential change detection. MiCaDe requires no calibration targets, or modification of the perception stack, providing low false-alarm rates with negligible computational overhead. Our key insight is that 3D and 2D bounding boxes produced by standard object detectors should remain geometrically consistent under correct calibration. By matching cross-modal detections, we derive geometric consistency metrics that serve as sensitive indicators of extrinsic drift. These metrics are aggregated into fixed-size batches and scored against a reference distribution, producing a likelihood stream that is monitored by a Change Point Model (CPM). Crucially, the CPM accumulates statistical evidence over time, enabling detection of subtle drifts that would otherwise go unnoticed. Experiments on multiple long-sequence datasets and on a real-world dataset with physically induced miscalibration confirm reliable detection under diverse conditions. Code available at: https://github.com/CarloSgaravatti/MiCaDe.
Aug 28, 2026

Adversarial Calibration Attack on Autonomous Vehicles

Autonomous vehicles (AVs) rely on accurate camera-LiDAR calibration for multimodal sensor fusion. In practice, calibration can drift due to vibration, temperature variation, or minor sensor displacement, motivating online calibration algorithms that detect and correct misalignment at runtime while allowing the vehicle to continue operating without a factory visit. Existing AV attacks largely assume correct calibration. We instead identify online sensor calibration as a new attack plane. A corrupted calibration update can persist across subsequent fusion operations, causing system-wide errors that propagate from perception to planning and control. We present Adversarial Calibration Attack (ACA), the first physical attack against camera-LiDAR online calibration. Using a single adversarial poster, ACA first spoofs the miscalibration detector to trigger the calibration process and then steers the calibration estimator toward an incorrect transformation. A unified optimization jointly designs the poster's geometry and texture for both objectives. We evaluate ACA across benchmark datasets, simulation, and physical experiments. On benchmark datasets such as KITTI and nuScenes, ACA induces up to 33.9 degrees mean rotational calibration error, thereby severely degrading object detection. In the CARLA simulator, the attack causes a collision when the corrupted calibration is accepted in vulnerable scenarios crafted by the attacker. On a real Husky robot, a printed adversarial poster successfully reproduces the calibration error. These results demonstrate that online calibration is a practical and safety-critical attack surface for AVs.