cs.CVNov 10, 2026

RECALL: Real-Time Recalibration of Multi-Camera Rigs via Learned OEM-Anchored Residuals

Authors: Mario Alberto Tapia de la Cruz, Charalambos Poullis

Organizations: Immersive and Creative Technologies (ICT) Lab, Concordia University Montreal, Canada

Abstract

Multi-camera rigs ship pre-calibrated from the manufacturer, but their calibration goes stale each time the rig is repositioned, and drifts continuously through wear, thermal cycling, and vibration. Recovering it on-the-fly is hard: classical bundle adjustment needs a fresh multi-view capture and a global optimization whose cost grows with the rig, ruling out real-time use. In this paper we present RECALL, a feed-forward method that recalibrates a movable multi-camera rig in a single pass. From the nominal OEM calibration as an anchor and a brief observation of a known object, it predicts each camera's current intrinsics and extrinsics, written as a shared global rotation of the rig composed with a small per-camera drift. Instead of regressing the calibration in one shot, RECALL refines its estimate with a learned, rig-coupled recurrent operator that reprojects through a differentiable projection and applies attention across the cameras at each step, and solves for the shared rotational gauge in-network with a learned Gauss-Newton step rather than regressing it. Because the ground truth is synthesizable, we train entirely on data generated on-the-fly and need no captured dataset. On a synthetic 10-camera benchmark, RECALL is more accurate than per-camera and rig-coupled joint bundle adjustment (0.26∘0.26^\circ vs 0.47∘0.47^\circ rotation, 5.45.4 vs 8.98.9 px focal) and runs about 105×10^5\times faster at about 0.120.12 ms per rig. On real data (TotalCapture, CMU Panoptic) it matches or beats offline rig-coupled bundle adjustment on absolute and relative rotation while running four-to-five orders of magnitude faster, and on the Panoptic surround rig it also matches the strongest image-only foundation models (VGGT, VGGT-ΩΩ, π3π^3) on relative pose while staying metric and about 15×15\times more accurate in focal length. Code: https://github.com/theICTlab/RECALL-multicam

Figures & tables

Explore similar work

Jun 24, 2026

Calousel: Extrinsic Calibration of Non-overlapping Multi-camera Systems from Pure Rotation

Extrinsic calibration of multi-camera systems with non-overlapping FOVs has been a challenging problem in the robotics literature. Conventional target-based methods impose substantial target setup overhead, either deploying large calibration targets or requiring pre-measured multi-target poses. Motion-based approaches instead suffer from drift error, scale ambiguity, and motion degeneracy. Securing both accuracy and usability, we propose a novel calibration method that leverages pure rotational motion, requiring only a single static calibration board. The key idea is to make all cameras sequentially observe the same target under a shared geometric reference, even without overlapping views. To integrate these time-separated observations, we formulate the problem using a latent turntable frame and a 3D error on SE(3) within a global optimization framework. We validate the proposed method on both a controlled camera rig and a full-scale vehicle platform with heterogeneous cameras, and analyze robustness under non-ideal turntable motion. Extensive experiments show that our approach maintains competitive accuracy without specialized precision hardware, proving its strong suitability for realistic on-site deployments. Our code is publicly available here.
Sep 30, 2026

StreamRig: Exploiting Intra-Rig Geometry for Streaming Multi-Camera Odometry

Mobile robots and vehicles carry synchronized multi-camera rigs, yet many streaming 3D foundation models are designed for monocular input, leaving efficient use of rig geometry a challenge. We present StreamRig, a freeze-and-stream framework that builds causal streaming odometry for calibrated rigs on a frozen multi-view 3D foundation model. The frozen front-end jointly perceives the synchronized views using rig calibration. A Rig-Resampler compresses their features, a CausalBridge applies causal attention with a key-value cache, and a lightweight head regresses rig poses. A periodic re-anchoring protocol supports stable pose estimation over long sequences. Only these modules are trained, 74.6M parameters in total, with relative poses as the sole supervision. Our two-stage training strategy combines group relocalization pretraining with causal rig training to transfer the geometric priors of the frozen front-end and the alignment ability of the pretrained modules to streaming odometry. We evaluate on NCLT, TartanGround, KITTI-360, and our self-collected humanoid-robot dataset ZJH, where training uses only simulation and real-world evaluation is zero-shot. Across all four datasets, StreamRig achieves lower translation and rotation drift than the evaluated non-oracle monocular streaming and rig-aware offline models, while maintaining low inference cost. Ablations and controlled camera-count experiments identify the sources of these gains. We further examine how longer training windows affect inference over longer horizons. Code has been released at https://github.com/WeiYuFei0217/StreamRig.
Apr 19, 2026

Multi-Camera Self-Calibration in Sports Motion Capture: Leveraging Human and Stick Poses

Multi-camera systems are widely employed in sports to capture the 3D motion of athletes and equipment, yet calibrating their extrinsic parameters remains costly and labor-intensive. We introduce an efficient, tool-free method for multi-camera extrinsic calibration tailored to sports involving stick-like implements (e.g., golf clubs, bats, hockey sticks). Our approach jointly exploits two complementary cues from synchronized multi-camera videos: (i) human body keypoints with unknown metric scale and (ii) a rigid stick-like implement of known length. We formulate a three-stage optimization pipeline that refines camera extrinsics, reconstructs human and stick trajectories, and resolves global scale via the stick-length constraint. Our method achieves accurate extrinsic calibration without dedicated calibration tools. To benchmark this task, we present the first dataset for multi-camera self-calibration in stick-based sports, consisting of synthetic sequences across four sports categories with 3 to 10 cameras. Comprehensive experiments demonstrate that our method delivers SOTA performance, achieving low rotation and translation errors. Our project page: https://fandulu.github.io/sport_stick_multi_cam_calib/.