Reusing Locomotion Training Recipes Across Humanoids via Body-Aligned Virtual Joints
Authors: Sol Choi, Mingon Kim, Seokin Seo, Jongeun Choi, Donghyeon Kim, Yisoo Lee
Organizations: Center for Humanoid Research, Korea Institute of Science and Technology, 02792, Seoul, South Korea · Department of Mechanical Engineering, Yonsei University, 03722, Seoul, South Korea · Advanced Robotics Lab., CTO Division, LG Electronics Inc., 06772 Seoul, South Korea · 1X Technologies, 150 Industrial Rd, San Carlos, CA 94070, USA
Reinforcement learning has enabled robust humanoid locomotion, yet training recipes (rewards, architectures, hyperparameters) remain hard to reuse across robots with different native joint coordinates, since policies output native joint angles while action scales, bounds, gains, and penalties are defined in those robot-specific coordinates. Existing transmission models convert native targets into actuator commands but do not standardize the coordinate interface exposed to the policy. We introduce a body-aligned virtual joint space upstream of this mapping: policy actions and observations follow a common anatomical convention, and a deterministic kinematic layer maps virtual targets to native ones, leaving the existing transmission and low-level control stack unchanged. Under a single unmodified recipe on three humanoids with different leg-axis layouts, it is the only interface that tracks accurately, keeps the feet aligned with the travel direction, and trains stably on all three, and on Unitree G1 hardware it reduces heading drift by nearly a factor of six.
Figures & tables
Fig. 1 : Hip-joint coordinates of three representative humanoids. The native axes differ across platforms (top), whereas the proposed body-aligned virtual joint coordinates express the same joints about a shared body convention, giving a consistent axis layout across embodiments (bottom).
Fig. 2 : Overview of the proposed body-aligned virtual joint interface. The proposed modules map policy actions and joint-state observations between the shared virtual space and each robot’s native space, while the existing native-to-actuator control stack remains unchanged.
Fig. 3 : Humanoid platforms used in simulation—Unitree G1, PND Adam, and a custom-built platform—with their leg joint-axis configurations.
Robot
Interface
Velocity Error (m/s)
Lateral Drift (m)
Unitree G1
Native
0.042 ± 0.001
0.086 ± 0.001
Task space
0.048 ± 0.002
0.129 ± 0.003
Virtual (in-loop)
0.042 ± 0.007
0.084 ± 0.001
Virtual (post-hoc)
0.053 ± 0.018
0.089 ± 0.003
PND Adam
Native
0.106 ± 0.018
0.094 ± 0.007
Task space
0.207 ± 0.016
0.082 ± 0.010
TABLE I : Sim-to-sim velocity tracking on the constant velocity command ( n=3 seeds, mean ± std). Velocity error and lateral drift are expressed in the base heading frame.
Fig. 4 : Foot-progression angle (toe-out) by platform and coordinate interface (all seeds, both feet).
Fig. 5 : Swing-leg motion on the PND Adam in simulation under the native, proposed, and task-space interfaces. The proposed interface keeps the feet aligned with the direction of travel.
Fig. 6 : Training stability across the three embodiments, measured by mean episode length over the first 6 k iterations (mean ± standard deviation over three seeds). The dotted line marks half of the maximum episode length.
Fig. 7 : Hardware rollouts under a constant straight-walking command, composited from video frames of one representative rollout per interface. The dash-dotted line is a 10 m floor reference along the commanded heading; the solid curve traces the path walked.