eess.SYNov 15, 2026

Course-Referenced Lateral Control of Trail-Following Convoys: String Stability and Adaptive Feedforward under Load Uncertainty

Authors: Nitesh Kumar, Sixu Li, Swaroop Darbha

Organizations: J. Mike Walker ’66 Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843, USA · Zachry Department of Civil and Environmental Engineering, Texas A&M University, College Station, TX 77843, USA

Abstract

Vehicles in a convoy can steer along the GNSS trails of the vehicles ahead when lane markings are unavailable, as on snow covered roads. Since each vehicle's tracking error enters the reference of the next, lateral errors can grow along the convoy. This paper presents a course referenced formulation of trail following in arc length, in which each follower takes the direction of its fitted trail as its heading reference. Error propagation then reduces to a single transfer function. We derive a condition under which combining the trails of the leader and the predecessor keeps the errors bounded for any convoy length, and show that following the predecessor alone lets the errors accumulate without bound, even without amplification, on roads that end turned or shifted sideways. Passenger and cargo loads and tire stiffness vary in practice, and we show that they enter the curvature feedforward through a single coefficient, whose mismatch leaves steady offsets on curves. We propose an adaptive law that estimates this coefficient on curves and removes the offsets. Simulations of an eleven vehicle convoy confirm the analysis.

Figures & tables

Explore similar work

May 3, 2026

Lateral String Stability for Vehicle Platoons: Formulation, Definition, and Analysis

Platooning of connected and automated vehicles provides significant benefits in terms of energy efficiency, traffic throughput, and, most critically, safety. These safety benefits depend on string stability, which dictates how disturbances propagate along a vehicle string. Although longitudinal string stability has been extensively examined, lateral string stability, which governs the propagation of path-tracking errors that can lead to unsafe deviations from the desired path, remains underexplored. Its importance is growing as autonomous vehicles increasingly depend on onboard sensing and map-free navigation, where sensor occlusions and tight formations amplify safety risks. This paper presents a framework for lateral string stability that focuses directly on safety-critical, path-relative tracking errors and enables consistent comparison across vehicles that follow the same planned path. The key element of the framework is an arc-length (Eulerian) viewpoint, a departure from traditional analyses, that clarifies how tracking errors at a given point on the path propagate from one vehicle to the next. Building on this foundation, we propose the definition of L2 lateral string stability along with two control strategies: a feedback-feedforward strategy that relies solely on onboard sensing, and a novel learn-from-predecessor strategy that makes use of vehicle-to-vehicle communication. Both strategies are analyzed for lateral string stability with respect to two error measures: tracking error vector and lateral (cross-track) error. Our results show that onboard sensing alone cannot guarantee attenuation of path-tracking errors, imposing a fundamental safety limitation, while V2V communication enables true error attenuation. The analysis further identifies structural controller requirements, showing that nonzero feedback on specific measurements is essential for guaranteeing stability.
Jun 29, 2026

Lateral String Stability for Vehicle Platoons

Connected and automated vehicle (CAV) platooning promises gains in energy efficiency and traffic throughput and, most critically, in safety. These safety benefits hinge on string stability, which determines how disturbances propagate along a platoon. While longitudinal string stability is well studied, lateral string stability, which governs the propagation of path-tracking errors that can lead to unsafe deviations from the intended path, remains underexplored. Its importance is increasing as autonomous vehicles rely more heavily on onboard sensing and map-free navigation, where sensor occlusion and dense formations amplify safety risks. This paper presents a new framework for lateral string stability that directly addresses safety-critical path-relative tracking errors and enables consistent comparison across vehicles following the same road geometry. Central to this framework is an arc-length (Eulerian) viewpoint, a departure from traditional analyses, that clarifies how tracking errors at a given point on the path propagate from one vehicle to the next. A formal definition of lateral string stability is introduced along with two control strategies: an onboard-sensing-only controller and a novel learn-from-predecessor approach utilizing vehicle-to-vehicle (V2V) communication. We show that onboard sensing alone cannot guarantee attenuation of path-tracking errors, imposing a fundamental safety limitation, whereas V2V communication enables true error attenuation.
Aug 8, 2026

Scalable High-Speed Lateral Control for Single-Body and Articulated Autonomous Vehicles

This paper presents a scalable lateral control framework for robust path tracking of single-body and articulated autonomous vehicles at high speeds. A clothoid-based controller is extended with three key adaptations: 1) an integrated tangential check and Frechet distance method for optimized lookahead and oscillation mitigation; 2) real-time trajectory segment classification for dynamic adjustment of the lookahead search range; and 3) a dual-adaptive, rate-controlled lookahead mechanism responsive to cross-track error and upcoming path geometry. To support different vehicle configurations, the framework also incorporates flexible tracking point selection and curvature-to-steering lookup tables, enabling control of points such as the tractor rear axle, hitch point, or trailer-related locations without changing the core control architecture. The controller is evaluated using high-fidelity TruckSim and Simulink simulations for both standalone and articulated vehicles across dual lane changes and winding-road scenarios. Results demonstrate stable high-speed path tracking, reduced oscillations, effective lookahead adaptation, low cross-track errors, and acceptable lateral acceleration across different vehicle configurations. The results support the use of a unified lateral control architecture that can scale from single-body to articulated autonomous vehicles.