Automatic Modulation Classification

Automatic modulation classification (AMC) models are frequently trained and validated on synthetic or channel-cabled data, leaving open the question of how they behave once path loss and antenna pointing error are introduced by a genuine free-space link. We report a curriculum fine-tuning study of a hybrid CNN-Transformer AMC model. The general-purpose, all-32-class dataset underlying the model was built entirely at 915 MHz, on a controlled, clock/PPS-synchronized MIMO-expansion-cable link (not spatial-multiplexing transmission); all subsequent free-space, real-hardware experimentation - the sequential fine-tuning curriculum, matched-distance evaluation, and every reported over-the-air accuracy figure - was carried out at 4 GHz, across five directional-antenna distances (25, 35, 50, 70, 75 cm) under fixed TX/RX gain. Three distances used near-ideal antenna alignment (~99%) and two used a deliberately introduced partial misalignment (~85%), fine-tuned last in the curriculum. We report matched-distance test accuracy (91.8-93.7% across all five 4 GHz conditions) and confusion-matrix analysis grounded in RF theory, and report honestly where our sequential fine-tuning order confounds cumulative link adaptation with antenna alignment, rather than overstating what the data can support.

Automatic modulation classification research has largely emphasized representation accuracy, but a cognitive receiver must also decide when heterogeneous evidence justifies overriding a trusted default prediction. We study this post-inference problem through cross-fitted residual utility and a primary-preserving cognitive decision policy. A structured KAN-Fourier classifier supplies the default probability, while neural and non-neural candidates provide observable evidence. Candidate-specific residual utility is learned from train-split out-of-fold predictions, and a disjoint validation split freezes action thresholds, approved transitions, conditional routes, and a unified risk mask before held-out evaluation. On RMLA, RMLB, and HISAR, the complete system improves overall accuracy from 63.632% to 66.332%, 65.161% to 66.168%, and 77.769% to 79.867%, respectively. Controlled comparisons show that the isolated utility target does not uniformly dominate alternative out-of-fold meta-learners; the consistent gain comes from the complete evidence-and-action policy. Paired bootstrap and Holm-corrected McNemar analyses support the controlled gains. A frozen-policy stress test under carrier-frequency offset, I/Q imbalance, and synthetic Rayleigh/Rician fading yields positive gains in all 11 conditions, with every paired 95% confidence interval above zero.

Automatic RF modulation recognition is of critical importance in spectrum monitoring, electronic warfare, and cognitive radio applications, where low signal-to-noise ratio (SNR) conditions and the growing diversity of modulation schemes limit the performance of existing methods. This paper proposes an uncertainty-driven hybrid deep learning architecture for recognizing RF signals over a broad modulation space. The proposed approach carries out a multi-stage classification process by combining spectral information obtained through low-cost FFT-based preprocessing with time-frequency features extracted from short-time Fourier transform (STFT) spectrograms. The architecture comprises a 2D convolutional neural network (2D CNN)-based path for fast, low-latency primary classification, MC Dropout-supported Bayesian uncertainty estimation for assessing classification reliability, and a BiLSTM-based secondary decision mechanism activated under high-uncertainty conditions. The proposed system is evaluated in a controlled simulation environment spanning different SNR levels and modulation classes. Experimental results show that the primary 2D CNN path achieves $83.3\pm0.7\%$ accuracy with an inference time of only 0.138 ms per sample, providing superior performance compared with traditional rule-based and classical machine-learning approaches. Furthermore, the obtained findings reveal the limitations of compact spectral feature representations and classifiers lacking temporal modeling, particularly in disambiguating FSK-based modulations. The uncertainty estimation module offers promising results for detecting low-confidence decisions, and the proposed approach demonstrates the potential of a low-latency and scalable solution for real-time RF modulation recognition.

Learned feature reweighting can improve automatic modulation classification (AMC) in software, but the same operation introduces additional arithmetic and latency when implemented on an FPGA. This work measures that trade-off in a compact fixed-point classifier using 24 sparse DFT-energy features, 8 phase/statistical features, and a 32-to-128-to-11 multilayer perceptron. A second architecture inserts a learned 32-element, 8-bit, input-dependent gate before the classifier. Gated and ungated models are trained using post-training quantization (PTQ) and quantization-aware training (QAT) with two matched training seeds. The resulting eight checkpoints are compiled independently for an Intel Cyclone V FPGA and evaluated over 352,000 physical-board classifications. Ungated models achieve higher test accuracy in all four matched gate comparisons, with mean gated-minus-ungated differences of -0.784 percentage points under PTQ and -0.616 percentage points under QAT. The effect of QAT changes direction between the two training seeds. In hardware, the gate adds an average of 1,318 adaptive logic modules (ALMs), 1,557 registers, 4 DSP blocks, and 3,140 processing cycles. All 352,000 board predictions agree exactly with an independent integer reference, and 3,760 captured intermediate values from one training seed also match. For this feature representation and implementation, learned gating increases FPGA cost without improving classification accuracy.

Chaotic modulation is an effective communication technique that exploits deterministic chaos to produce pseudo-random signals. A widely adopted approach involves modulation of the chaotic bifurcation parameter. This paper introduces a deep learning-based demodulation method for keying of the bifurcation parameter. It describes the architecture of the convolutional neural network and evaluates performance metrics for signals generated using the chaotic logistic map. The study assesses the bit error rate for binary signals and reports a bit error rate of 0.0819 for a bifurcation parameter deviation of 1.34% under additive white Gaussian noise at a signal-to-noise ratio of -13 dB (corresponding to a normalized signal-to-noise ratio of +20 dB). The results demonstrate the capability to detect chaotic patterns even when the specific patterns were not included in the training dataset.

Narrowband interference (NBI) severely degrades orthogonal frequency-division multiplexing (OFDM) systems by corrupting subcarriers and rendering classical soft demodulation ineffective. Conventional compressed-sensing (CS) mitigation exhibits high sequential latency and leaves structured, non-Gaussian residuals that cause log-likelihood ratio (LLR) unreliability, decoder saturation, and severe error floors when employing classical Gaussian demappers. We resolve this pipeline mismatch using a unified deep learning framework for joint NBI cancellation and robust soft demodulation. First, NBI-CNet employs a physics-informed convolutional architecture to estimate NBI parameters and remove multi-tone interference in a single forward pass. Without requiring prior knowledge of the active interferer count, NBI-CNet reduces computational complexity by up to 60% ($N{=}2048, Q{=}64$) compared to the state-of-the-art EOMP-IDS algorithm. Second, LLR-CNet acts as a structural whitener by mapping non-Gaussian post-mitigation residuals onto well-calibrated soft metrics. Simulations demonstrate that this joint framework eliminates the error floors inherent to traditional baselines across dense grids. Under severe interference ($\text{SIR}{=}{-}10$ dB), the pipeline operates within a $0.2$ to $0.5$ dB SNR margin of the optimal iterative baseline at a target block error rate (BLER) of $10^{-4}$. Under mild interference ($\text{SIR}{=}10$ dB) with heavy spectral overlap ($Q{=}12$), where classical greedy algorithms erroneously subtract valid data components and corrupt the payload, NBI-CNet avoids signal-peak confusion to deliver a coding gain exceeding $3$ dB. Finally, the architecture circumvents the $2{\times}10^{-4}$ error floor triggered by interferer-estimation errors, while its scale-invariant design enables robust generalization across arbitrary FFT sizes without retraining.

The dynamics of communication environments induce significant distribution shifts across domains, challenging the generalization of deep learning-based automatic modulation classification (AMC) models. While existing UDA methods alleviate this problem by aligning source and target features, they give limited consideration to modulation-specific structures that remain informative across domain conditions. In this paper, we consider signal prior knowledge, grounded in communication protocols and physical principles, as a potential way to enhance cross-domain representation learning. Given that different priors may vary in modulation discriminability, domain stability, and complementarity, this paper first analyzes five commonly adopted signal representations that instantiate different signal priors. From them, in-phase/quadrature (IQ), amplitude--phase (AP), and autocorrelation function (ACF) are selected as compact prior-guided inputs. Based on that, a dual knowledge and data-driven network (DKDNet) is proposed for cross-domain AMC. The multi-representation feature encoder (MRFE) and dynamic lightweight fusion unit (DLFU) are designed to achieve unified representation learning and adaptive feature fusion, and the resulting fused features are optimized with modulation classification and adversarial domain alignment objectives. Experiments on both simulated and public datasets validate the rationality of the prior selection and demonstrate the superiority of the proposed method.

Designing effective feature extractors is critical for blind signal analysis tasks such as automatic modulation recognition (AMR), signal scheme recognition (SSR), and \color{black} signal structure parsing (SSP). In this work, we propose dual-channel neural network (DualNN) that efficiently exploits complex-valued signals through parameter sharing across IQ channels. Unlike traditional real-valued or complex-valued models, DualNN is a groundbreaking framework which shares the network parameters for processing the real and imaginary parts of the complex-valued signals, and is theoretically shown to reduce generalization error while preserving expressive capacity. Specifically, we propose a novel Transformer-based architecture to implement DualNN, called Dualformer. The Dualformer segments input signals into patch-level tokens and captures multi-granularity features, enabling robust performance across diverse signal analysis tasks. Furthermore, we conduct extensive experiments comparing Dualformer with three Transformer-based baselines and four conventional DL-based approaches. Results demonstrate consistent performance improvements on AMR, SSR, and SSP tasks. Besides, the modular design of DualNN allows it to generalize well to blind signal processing tasks such as blind source separation and low-SNR spectrum sensing. This work paves the way for a broader application of DualNN architectures in unsupervised and weakly supervised complex-valued signal analysis scenarios.

Although deep learning-based methods can achieve high accuracy in automatic modulation recognition (AMR) tasks, their high computational cost makes it difficult to strike a balance between accuracy and power consumption, thereby limiting their application on resource-constrained platforms. Neuromorphic architectures that perform spike-driven inference with modest energy budgets have recently been explored for vision and timeseries tasks. Motivated by these works, we propose EMRFormer, a novel end-to-end spiking nerural network (SNN) architecture that applies spike-driven transformer to the constraints of neuromorphic hardware for AMR. The model incorporates an adaptive spike encoder and Integer Leaky Integrate-and-Fire neurons to mitigate the degradation of effective information and enhance SNN representational capacity. By integrating spike-separable Convolution Neural Networks (SSCNN) into Spike-Driven Transformers (SpikeFormer), EMRFormer effectively extracts multi-scale temporal features from the raw IQ waveforms. We validate our approach across various mainstream datasets, the experimental results show that EMRFormer achieves state-of-the-art interms of accuracy, outperforming all the baselines. Furthermore, the model maintains strong performance in low signal-to-noise(SNR) environments and reduces theoretical energy consumption by over 90%. Finally, we evaluate our model on a KA200 neuromorphic chip. The results show that our model achieves up to 5 times reduction in power compared to running on a 3090 GPU or an Orin NX. This work demonstrates a promising pathway for AMR on resource-constrained devices.

Modulation recognition systems rely on heterogeneous signal representations. 2D signal-image modalities such as time-frequency and cyclostationary maps capture structural patterns, while 1D statistical descriptors such as higher-order power spectra encode complementary cues. Under distribution shift, these modalities degrade unevenly, making robust fusion a central challenge for practical deployment. Progress is further limited by the lack of a unified evaluation protocol that systematically separates different shift types. This paper addresses both challenges through a joint benchmark-and-model study in underwater acoustic modulation recognition. UAMR-ShiftBench is the first benchmark to jointly cover in-distribution, low-SNR, unseen-environment, unseen-communication-parameter, and measured sea-trial evaluation under a single matched protocol, with two independent real-world subsets collected during two sea-trial campaigns conducted in March and November in the South China Sea. SCP-TriCA fuses STFT, cyclostationary, and P2/P4 (second- and fourth-order power spectra) modalities hierarchically: the two 2D modalities are first aligned through bidirectional cross-attention, and the 1D statistical modality is then incorporated through a sample-adaptive selective gate. On UAMR-ShiftBench, SCP-TriCA achieves 95.33% in-distribution accuracy and 74.59% simulated OOD average, outperforming the strongest baseline by 5.12 percentage points, and reaches 91.14% and 94.86% on the two sea-trial subsets, exceeding the best baseline by 15.71 and 23.00 percentage points respectively. Ablation results confirm that the gains stem from modality complementarity and the hierarchical fusion design. Code and models are available at https://github.com/ronglaiqian/UAMR-ShiftBench.

A new fractional ambiguity function (NFrAF) derived from the fractional Fourier transform is introduced as a generalization of the classical ambiguity function. The fundamental analytical properties of the NFrAF, including symmetry, marginality, and Moyal type identities, are rigorously established. After verifying its ability to detect and localize monocomponent and multicomponent linear frequency modulated (LFM) signals, the NFrAF is integrated into a convolutional neural network based machine learning framework for signal classification. Owing to its superior time frequency resolution and localization, the NFrAF provides a more informative input representation than conventional methods such as the spectrogram and classical ambiguity function. Experimental results on simulated datasets demonstrate consistent improvements in classification accuracy, highlighting the effectiveness of the proposed representation for data driven signal analysis.

Standard Self-Supervised Learning (SSL) for Automatic Modulation Recognition (AMR) struggles with ineffective isotropic augmentations, spectral instability, and semantic drift. To address these challenges, we propose Dynamic-Consistency Contrastive Learning (DyCo-CL), a geometry-aware framework that couples Virtual Adversarial Augmentation (VAA) with a semantic consistency loss. We provide a theoretical analysis indicating that this strategy acts as an implicit spectral regularizer for the encoder, enabling stable manifold exploration. Complementing this, our Signal-Adaptive Swin Backbone with fixed-window attention improves structural stability by constraining attention locality, while a Hybrid Knowledge Fusion module anchors representations with physical priors. Experiments on RML benchmarks show that DyCo-CL achieves a 6.27% accuracy gain in 1-shot settings over prior methods.

Under the trend of multi-waveform coexistence in 6G IoT, intelligent receivers must first identify physical-layer waveform types before performing correct demodulation and resource scheduling. However, existing signal identification research largely focuses on symbol-level modulation classification. Research directly targeting physical-layer waveform types (e.g., OFDM, OTFS, LoRa) is not only extremely scarce but also heavily reliant on deep neural networks and complex time-frequency transforms, making deployment on resource-constrained terminals difficult. Symbol modulation classification methods themselves cannot circumvent the prerequisite of ``waveform identification first.'' To address this dual gap, we propose an ultra-lightweight waveform classification framework based on time-frequency multidimensional features with a cooperative Z-test tree (ZTree). The framework employs low-complexity time-domain feature extraction, and the classification backend adopts a ZTree optimized by Z-statistical testing, which uses hypothesis testing confidence to automatically control decision tree splitting and size, ensuring efficient execution on resource-limited processors. Tested on ten 6G candidate waveforms including OFDM, OTFS, DSSS, LoRa, and NB-IoT, the method achieves 99.5% average accuracy under AWGN and 87.4% under TDL-C multipath channels, with main confusion between OTFS and LoRa. Implemented in C on an x86 platform, single inference latency is under 4~ms. To the best of our knowledge, this is the first work achieving real-time recognition of ten IoT waveform types. Future work will target deployment acceleration on embedded MCUs. Code and dataset are open-sourced at: https://github.com/Einstein-sworder/IoT-wave.

Deep learning-based AMC methods have achieved remarkable performance, but their practical deployment remains constrained by the high cost of labeled data. Although self-supervised learning (SSL) reduces the reliance on labels, existing SSL-based AMC methods often rely on task-agnostic pretext objectives misaligned with modulation classification, leading to representations entangled with nuisance factors such as symbol, channel, and noise. In this paper, we identify intra-instance modulation consistency as a task-aware structural prior, whereby different temporal segments of the same signal may differ in waveform while preserving the same modulation type, thus providing a principled cue for task-aligned self-supervision. Based on this prior, we propose Mod-CL, a Modulation consistency-based Contrastive Learning framework that constructs positive pairs from different temporal segments of the same signal instance, to encourage the model to learn shared modulation information while suppressing nuisance variations. We further develop a contrastive objective tailored to Mod-CL, which jointly exploits temporal segmentation and data augmentation to pull together views sharing the same modulation semantics while avoiding supervisory conflicts within each signal instance. Extensive experiments on RadioML datasets show that Mod-CL consistently outperforms strong baselines, especially in low-label regimes, achieving substantial improvements in linear probing accuracy.

Automatic modulation classification (AMC) in real-world deployments demands robustness to distribution shifts arising from hardware impairments, unseen propagation environments, and recording conditions never encountered during training. Although wireless foundation models offer a promising starting point for robust RF representation learning, an important open question is how to adapt them efficiently to out-of-distribution (OOD) downstream tasks without overwriting the structure learned during large-scale pre-training. In this paper, we investigate prompt-based adaptation as a general mechanism for OOD transfer in wireless foundation models. We propose RFPrompt, a parameter-efficient framework that introduces learnable deep prompt tokens while keeping the pretrained backbone frozen, enabling task-specific adaptation with minimal trainable parameters. We instantiate and evaluate this approach on the Large Wireless Model (LWM), a mixture-of-experts wireless foundation model, and study its behavior under both standard and OOD modulation-classification settings. Results show that prompt-based adaptation consistently improves robustness under distribution shift and limited supervision, particularly on real-world over-the-air IQ data, while preserving strong parameter efficiency. These findings suggest that prompt learning is a practical and effective strategy for adapting wireless foundation models to challenging downstream RF environments.

Multi-antenna receiving systems have become a prevalent technical solution in communication systems. Meanwhile, deep learning has achieved significant progress in automatic modulation recognition tasks in single-antenna systems. However, the application of deep learning in multi-antenna modulation recognition (MAMR) tasks is still limited. In this paper, we propose an MAMR method namely MAMR-IQ to fully explore the diversity gain of a multi-antenna receiving system, which concatenates the raw received in-phase and quadrature (IQ) signals of multiple antennas and feeds them into a convolutional neural network. Simulation results show that the proposed MAMR-IQ method outperforms two existing deep learning-based MAMR methods which are based on direct voting (DV) and weight average (WA) in terms of both recognition accuracy and computational complexity. To address the problem of limited training data in few-shot scenarios, we further propose a data augmentation method that involves exchanging IQ sequences received by any two antennas to generate augmented samples. Simulation results show that with the proposed augmentation method, the recognition accuracy can be further improved.