Electronic Design Automation

Also known as EDA

Overview

Electronic Design Automation (EDA) develops tools for turning hardware specifications into circuits, chip layouts, and printed circuit boards, then checking that designs work and meet constraints such as timing, power, area, and manufacturability. Traditional methods include logic synthesis, formal verification, physical-design heuristics, and circuit simulation; newer work adds graph neural networks, surrogate models, Bayesian optimization, and reinforcement learning to predict results or explore designs with fewer costly evaluations. Large language models are increasingly used to generate and repair RTL, create testbenches, and coordinate multi-step workflows with synthesis, simulation, and layout tools. A central challenge is ensuring that gains measured with proxies or on small benchmarks survive full tool flows and sign-off checks, especially for complex designs and long-running agent workflows.

Latest papers

246 papers36 papers in the last four weeks, up 3% on the four weeks before. 0.3% of all new papers.

Jan 12, 2026

VLM-CAD: VLM-Optimized Collaborative Agent Design Workflow for Analog Circuit Sizing

Vision Language Models (VLMs) have demonstrated remarkable potential in multimodal reasoning. However, they can have spatial blindness and logical hallucinations when interpreting densely structured engineering content, such as analog circuit schematics. To address these challenges, we propose a Vision Language Model-Optimized Collaborative Agent Design Workflow for Analog Circuit Sizing (VLM-CAD) designed to support step-by-step reasoning over multimodal evidence. VLM-CAD bridges the modality gap by integrating a neuro-symbolic structural parsing module, Image2Net, which transforms raw pixels into explicit topological graphs and structured JSON representations to anchor VLM interpretation in deterministic facts. To ensure the reliability required for engineering decisions, we further propose ExTuRBO, an Explainable Trust Region Bayesian Optimization method. ExTuRBO employs agent-generated semantic seeds to warm-start local searches and uses Automatic Relevance Determination to provide sensitivity evidence for the final design report. Experimental results on 12 sizing tasks covering six circuits and four technology platforms show that VLM-CAD achieves a pooled Strict Pass@1 of 23.3% and a Relaxed Pass@1 of 91.7%, while providing sensitivity evidence for final design reports.
Jan 7, 2026

MHRC-Bench: A Multilingual Hardware Repository-Level Code Completion benchmark

Large language models (LLMs) have achieved strong performance on code completion in general-purpose programming languages, but existing repository-level benchmarks focus almost exclusively on software code and largely overlook hardware description languages (HDLs). We present MHRC-Bench, consisting of MHRC-Bench-Train and MHRC-Bench-Eval, the first benchmark for multilingual hardware code completion at the repository level with functional evaluation. MHRC-Bench covers three major hardware design coding styles and annotates each completion target with code-structure-level and hardware-oriented semantic labels derived from concrete syntax tree (CST) analysis. Post-training billion-scale code LLMs on MHRC-Bench-Train enables smaller open-weight models to outperform much larger general-purpose models under matched context windows. Beyond aggregate accuracy, our analysis surfaces four findings that distinguish hardware from software code completion: (i)~performance varies sharply across HDLs, with high-level synthesis (HLS) easiest and VHDL hardest in most settings across functional pass rate, exact match (EM), and edit similarity (ES); (ii)~hardware accuracy is non-monotonic in code-structure depth, in contrast with the monotonic depth--accuracy curve known for software; (iii)~accuracy plateaus once the input context exceeds 2{,}048 tokens, while software completion continues to benefit from longer context; and (iv)~certain repository-level retrievers tuned on software underperform a no-retrieval baseline on HDL repositories because their structural and dependency assumptions are violated by hardware code.
Aug 22, 2025

RF-Informed Graph Neural Networks for Accurate and Data-Efficient Circuit Performance Prediction

Accurately predicting the performance of active radio frequency (RF) circuits is essential for modern wireless systems but remains challenging due to highly nonlinear behavior and the high computational cost of traditional simulation tools. Existing machine learning (ML) surrogates often require large datasets to generalize across various topologies or are not accurate on held-out circuits. This work presents a lightweight, data-efficient, and topology-aware graph neural network (GNN) framework for predicting key performance metrics of active RF circuit classes, such as low-noise amplifiers (LNAs), mixers, voltage-controlled oscillators (VCOs), power amplifiers (PAs), and voltage amplifiers (VAs). The proposed framework employs RFIC domain-informed feature indexing to enable cross-topology adaptability by cheap encoding of functional device semantics (e.g., differential pair and varactor transistors) and efficient knowledge transfer. The surrogate model represents circuits using device-terminal graph abstractions to preserve fine-grained connectivity and transistor-level symmetry. The final model is generalized to a wide variety of classes by being trained in parallel. Experimental results demonstrate accurate modeling of multimodal and heavy-tailed RF performance distributions, achieving an average mean relative error (MRE) of 2.71% across nineteen topologies, an improvement of 3.3x and 20x faster in training over prior art, and the generalization to held-out topologies is improved by ~26.2x. Furthermore, this work shows ~36x training data efficiency compared to state-of-the-art, demonstrating its effectiveness for scalable and deployment-ready RF design automation.
Mar 28, 2025

A Survey of Circuit Foundation Model: Foundation AI Models for VLSI Circuit Design and EDA

Artificial intelligence (AI)-driven electronic design automation (EDA) techniques have been extensively explored for VLSI circuit design applications. Most recently, foundation AI models for circuits have emerged as a new technology trend. Unlike traditional task-specific AI solutions, these new AI models are developed through two stages: 1) self-supervised pre-training on a large amount of unlabeled data to learn intrinsic circuit properties; and 2) efficient fine-tuning for specific downstream applications, such as early-stage design quality evaluation, circuit-related context generation, and functional verification. This new paradigm brings many advantages: model generalization, less reliance on labeled circuit data, efficient adaptation to new tasks, and unprecedented generative capability. In this paper, we propose referring to AI models developed with this new paradigm as circuit foundation models (CFMs). This paper provides a comprehensive survey of the latest progress in circuit foundation models, unprecedentedly covering over 130 relevant works. Over 90% of our introduced works were published in or after 2022, indicating that this emerging research trend has attracted wide attention in a short period. In this survey, we propose to categorize all existing circuit foundation models into two primary types: 1) encoder-based methods performing general circuit representation learning for predictive tasks; and 2) decoder-based methods leveraging large language models (LLMs) for generative tasks. For our introduced works, we cover their input modalities, model architecture, pre-training strategies, domain adaptation techniques, and downstream design applications. In addition, this paper discussed the unique properties of circuits from the data perspective. These circuit properties have motivated many works in this domain and differentiated them from general AI techniques.
Mar 11, 2025

ResBench: Benchmarking LLM-Generated FPGA Designs with Resource Awareness

Field-Programmable Gate Arrays (FPGAs) are widely used in modern hardware design, yet writing Hardware Description Language (HDL) code for FPGA implementation remains a complex and time-consuming task. Large Language Models (LLMs) have emerged as a promising tool for HDL generation, but existing benchmarks for LLM-based code generation primarily focus on functional correctness while overlooking hardware resource usage. Furthermore, current benchmarks offer limited diversity and do not fully represent the wide range of real-world FPGA applications. To address these shortcomings, we introduce ResBench, the first resource-focused benchmark explicitly designed to distinguish between resource-optimized and inefficient LLM-generated HDL code. ResBench consists of 56 problems across 12 categories, covering applications from finite state machines to financial computing. Our open-source evaluation framework automatically tests LLMs by generating Verilog code, verifying correctness, and measuring resource usage. The experiments, which primarily analyze Lookup Table (LUT) usage, reveal significant differences among LLMs, demonstrating ResBench's capability to identify models that generate more resource-optimized FPGA designs.
Nov 6, 2023

Leveraging High-Level Synthesis and Large Language Models to Generate, Simulate, and Deploy a Uniform Random Number Generator Hardware Design

We present a new high-level synthesis methodology for using large language model tools to generate hardware designs. The methodology uses exclusively open-source tools excluding the large language model. As a case study, we use our methodology to generate a permuted congruential random number generator design with a wishbone interface. We verify the functionality and quality of the random number generator design using large language model-generated simulations and the Dieharder randomness test suite. We document all the large language model chat logs, Python scripts, Verilog scripts, and simulation results used in the case study. We believe that our method of hardware design generation coupled with the open source silicon 130 nm design tools will revolutionize application-specific integrated circuit design. Our methodology significantly lowers the bar to entry when building domain-specific computing accelerators for the Internet of Things and proof of concept prototypes for later fabrication in more modern process nodes.