Few-Shot Anomaly Detection

Few-shot visual anomaly detection is fundamentally a visual comparison task, requiring fine-grained inspection of a query against normal references. Many recent methods based on large vision-language models (LVLMs) emphasize comparative reasoning through language chain-of-thought. Yet discrete, abstract descriptions may underrepresent dense, fine-grained visual differences, leaving a gap between visual comparison and its expression in language. To address this gap, we propose Visual Difference DeepStack (VD-DeepStack), which explicitly conditions language reasoning on query-reference visual differences. Specifically, we fuse DINO features with the LVLM visual hierarchy to strengthen fine-grained representations, then construct dense difference evidence from residuals between query features and softly matched reference features. The difference-evidence path injects spatially weighted difference vectors into query-image states at multiple decoder depths, while an auxiliary visual-context path provides fine-grained appearance information to support their interpretation. Experiments on 4 industrial and 2 medical anomaly benchmarks demonstrate substantial improvements in few-shot anomaly detection over baselines relying on textual comparative reasoning. These results support mitigating the visual comparison-reasoning gap through the joint design of comparison representations and their integration into the decoder. Code will be released upon acceptance.

Open-set graph anomaly detection trains on a few labeled anomalies from one class and must also find anomaly classes that were never labeled. Published results share three conventions: the test score is read at the best epoch on the test set, baseline numbers are copied from earlier papers, and most anomalies are minority classes relabeled as anomalous. We ask how much of the reported ranking these conventions decide. We re-run two recent methods, DEMO and NSReg, together with OUTPOST, a small first-order detector built for this study. All three use one protocol with identical seeds and splits on eight graphs (seven for the baselines, which cannot run on ogbn-mag), ten seeds each, and every run is scored under both the best-epoch rule and a deployable validation rule. Before the runs that test them, we registered 40 predictions. Three findings hold. First, the rule changes the leader: under the best-epoch rule, OUTPOST and NSReg each lead three of seven graphs, while under the validation rule, NSReg leads five. Second, the best-epoch bonus depends on how the benchmark was built: 0.045--0.080 AUC-ROC on the three small relabeled-class graphs and 0.002--0.014 on the three real fraud graphs. Third, pseudo-labeling in OUTPOST is worth 0.038--0.065 AUC-ROC on the same three graphs but gives no benefit on any real fraud graph. We also show that a 0.002 tie band for hyperparameter selection lies below the paired standard error on all six graphs tested, even at ten seeds. Twelve of our 40 predictions were falsified, and we report them. We close with a short reporting checklist.

Vision-Language Models such as CLIP enable effective few-shot medical anomaly detection (AD) via strong image-text semantic alignment. However, their globally contrastive pretraining lacks explicit spatial supervision, limiting precise lesion localization. In contrast, Vision Foundation Models (VFMs) such as DINO learn spatially coherent patch representations via self-distillation and local-to-global consistency, better capturing fine-grained anatomical structures. Leveraging this complementarity, we propose Spatial-FAD, a spatial-aware few-shot medical AD framework that improves lesion localization by combining VFM spatial priors with CLIP semantics. Specifically, we introduce a VFM-enhanced adapter that injects a structural affinity prior derived from DINO into CLIP features. This structure-guided refinement encourages visual embeddings to better adhere to lesion boundaries while maintaining semantic alignment. To address the loss of spatial detail from patchification and the limited input resolution of CLIP, we adopt a sliding-window aggregation strategy. This generates high-resolution, spatially dense embeddings to further enhance localization granularity. Moreover, we introduce a prototype-enhanced support memory scheme to efficiently exploit the few-shot support set. This module stores compact prototypes for normal and abnormal patterns, reducing memory costs while boosting performance by fusing patch-to-prototype and image-text similarities. Extensive experiments on three benchmark datasets, including Liver CT, Retinal OCT, and Brain MRI, demonstrate that Spatial-FAD significantly outperforms state-of-the-art methods, especially in lesion segmentation. Notably, in the 4-shot scenario, our method achieves an average improvement of over 11.4% in Dice score and 1.8% in AUC. Code is available at: https://github.com/JuzhengMiao/Spatial-FAD.

We introduce GLASS, a framework for graph-level anomaly detection (GLAD) that achieves robust cross-domain transferability through graph-language alignment on the unit hypersphere. GLASS builds a unified representation space by aligning a structure-aware graph encoder with an instruction-aware text embedding via a multi-slice soft cosine objective. Our framework serializes local, global, and semantic graph properties into a compact Graph Descriptor Prompt (GraphDP), creating a text bridge that enables domain-agnostic anomaly scoring. By enforcing multi-scale consistency through Matryoshka representation slices, the model captures anomalous deviations at multiple levels of granularity. We formulate anomaly detection as density estimation on the aligned hypersphere and introduce Spherical Multi-Modal Scoring (SMS), which instantiates von Mises-Fisher kernel density estimators in both graph and text embedding spaces. This probabilistic formulation recovers angular 1-nearest-neighbor scoring in the high-concentration limit, motivates the practical mean k-nearest-neighbor scorer, and provides a principled fusion of structural and semantic anomaly signals. The shared text embedding space further serves as a cross-domain bridge: by encoding a target domain's GraphDP without target-domain training data, GLASS performs zero-shot anomaly detection, and with only a handful of normal examples, few-shot adaptation via reference-set calibration. For privacy-sensitive deployment, we extend reference-set calibration with a bounded joint graph-text kernel summary that provides graph-record differential privacy while keeping the encoders fixed independently of the private target references. Across twelve benchmarks and three meta-domains, GLASS obtains the best average AUROC and rank compared with recent advanced GLAD baselines and enables effective cross-domain transfer.

Vision Foundation Models (VFMs) provide transferable patch representations for few-shot industrial anomaly detection, but their attention computation is typically inherited from pretraining objectives centered on semantic aggregation. This creates a potential mismatch: token relations that support semantic recognition may not adequately expose the localized texture and structural deviations required for anomaly localization. We therefore investigate the hypothesis that the attention computation of a frozen VFM can be reconfigured as a task-relevant component of anomaly detection. We instantiate this idea with Power-Law Self-Correlation Enhanced Attention (PL-SCEA), which retains the semantic context of pretrained query-key attention while constructing token-adaptive self-correlations over contextualized value features. Positive-correlation filtering and power-law reweighting then emphasize relations that are salient relative to each token's relational background, without introducing additional trainable attention projections. The resulting features are modeled by a lightweight variational autoencoder that provides a fixed-size reconstruction-based representation of category-specific normality. The two stages serve complementary roles: attention reconfiguration shapes how local relational deviations are represented, while reconstruction-based modeling converts deviations from learned normality into anomaly scores. Across MVTec AD and VisA, the complete framework achieves competitive image-level detection and consistently strong pixel-level localization across the evaluated few-shot settings. Ablations further show that PL-SCEA improves localization with either the VAE or a memory bank under the tested setting. These results support the view that task-aligned attention reconfiguration can improve the anomaly-localization capability of frozen pretrained representations.

Few-shot industrial anomaly detection (FS-IAD) focuses on detecting and localizing visual defects in industrial inspection during the cold-start phase, where only a limited number of normal training samples are available per category. Recent advances in this field predominantly leverage visual features from foundation-model and have achieved promising performance. Despite the strong representational power of foundation-model features, the model generalization remains fragile due to the extreme scarcity of normal training data.To address this pivotal issue, we propose ConceptADapt, a concept-guided adaptive feature reconstruction model with dynamic attention. Specifically, our model pre-learns a set of fixed normal concepts from the limited support features and leverages them to mine relationships with query features, thereby recalibrating their statistics for improved anomaly detection at test time. To mitigate the prevalent feature shortcut problem, which is particularly severe under low-data regimes, we further develop a dynamic attention mechanism integrated with sparse autoencoders to learn robust normal concepts during training. Moreover, to enable fast adaptation during inference, our model remains lightweight by incorporating LoRA into the attention module, which introduces only minimal updating parameters.Extensive experiments on three widely adopted FS-IAD benchmarks, including MVTec-AD, VisA, and MPDD, demonstrate that our model consistently outperforms state-of-the-art (SOTA) approaches across both detection and localization tasks, achieving significant improvements under various shot settings.

Pose-agnostic Anomaly Detection (PAD) remains challenging as anomalies can appear under arbitrary viewpoints, requiring methods to handle significant pose variations. Existing approaches rely on complex 3D reconstruction, which are computationally expensive and require extensive multi-view data. We propose PADFormer, a novel image-space approach that leverages Vision Transformer (ViT) to directly reconstruct anomaly-free versions of query images while preserving pose information. Our key insight is to adapt cross-view masked reconstruction for anomaly detection through training exclusively on normal data, combined with dynamic patch selection and spatial alignment mechanisms that enable effective learning from sparse reference views under significant pose variations. During inference, we perform multiple forward passes with different masking patterns to generate an ensemble of anomaly-free reconstructions, ensuring comprehensive coverage of the query image. Anomalies are detected by comparing these reconstructions with the query image. PADFormer achieves state-of-the-art results on the PAD benchmark while maintaining comparable performance on classic few-shot anomaly detection (FSAD) tasks, demonstrating superior efficiency and generalization without requiring 3D reconstruction.

Medical anomaly detection identifies abnormal images and localizes lesions under scarce supervision while generalizing across organs and modalities. Existing CLIP-based methods reduce annotation requirements through vision--language alignment, but their normal and abnormal references, whether text prompts or learned visual tokens, remain fixed across test images. Such static references may not transfer reliably to unseen targets in a cross-domain medical imaging scenario. To address this, we propose ReCAP, a language-free framework that replaces static anchors with input-conditioned visual prototypes. ReCAP re-centers separated normal and abnormal prototypes for each image through a bounded gated modulation, enabling query-adaptive anomaly scoring while constraining context-induced prototype drift. For the few-shot setting, we introduce a non-parametric normal-reference memory to preserve instance-level target-domain variation and complement the conditional prototype branch. Across six medical benchmarks, ReCAP achieves the best image-level AUROC on all zero-shot and 23 of 24 few-shot settings, and the best zero-shot pixel-level AUROC on all three segmentation datasets. Particularly, it reduces inference latency by over 70% compared to the fastest baseline, without text prompts or test-time gradient updates.

Vision foundation models have enabled strong training-free anomaly detection (AD). However, most existing approaches rely primarily on independent local patch features, leaving the global contextual information encoded by Vision Transformers (ViTs) underexploited. In this work, we identify the dual characteristics of the ViT [CLS] token: its embedding provides anomaly-invariant global semantic representation, while its attention maps implicitly highlight spatially abnormal regions. Building on this observation, we propose a fully automated AD framework leveraging global context to remove manual tunings. Our framework introduces (1) an automatic augmentation selection strategy driven by [CLS]-level semantic consistency, and (2) an attention-guided feature reweighting mechanism that dynamically adjusts patch contributions according to [CLS] attention saliency. By integrating these components over multi-level features, our method achieves stable anomaly scoring and precise localization without training or parameter tuning. Under the one-shot setting, it achieves Image-AUC scores of 97.7%, 93.2%, and 84.5% on MVTec-AD, VisA, and Real-IAD. Using a single fixed configuration across categories, backbones, and datasets, the method establishes a new state-of-the-art for plug-and-play, training-free anomaly detection while maintaining strong robustness and practical scalability.

Few-shot industrial defect detection remains difficult for standard supervised detectors, which achieve poor performance on boundary-dominated industrial defects. This paper proposes rough path signature-guided geometry augmentation (RPS-GA), a geometry-aware approach in which Canny edge contours are treated as ordered planar paths whose truncated second-order signature responses, especially the antisymmetric Lévy-area term, are aggregated into a spatial map that highlights boundary-related structure through two fusion operators, SIG-AUG and SGAA. The approach is evaluated on NEU-DET and PCB-Defect under a few-shot protocol with 5, 10, 20, or 50 labeled images per class, using an unmodified YOLOv8n detector throughout. Compared with the baseline, RPS-GA delivers large gains when supervision is limited, although the margin shrinks as more labels become available. On NEU-DET, SIG-AUG raises 10-shot [email protected] from 0.341 to 0.583, whereas on PCB-Defect, SGAA improves 10-shot [email protected] from 0.086 to 0.299 and yields usable detection at 5-shot where the baseline fails entirely. These trends are confirmed by multi-seed evaluation across independent random partitions. Overall, the results indicate that second-order path-signature geometry offers a practical way to strengthen few-shot industrial defect detection without meta-learning or detector redesign.

Prenatal anomaly classification and localization is of critical importance for fetal health and pregnancy management. Although ultrasound (US) is the primary modality for prenatal screening, accurate diagnosis remains challenging due to the low prevalence and high heterogeneity of anomalies. Existing deep learning methods for prenatal tasks rely on large-scale annotated datasets, which are difficult to obtain in practice. Although few-shot learning alleviates data scarcity, it typically requires fine-tuning for new categories, limiting its practicality in resource-limited clinical settings. To address these challenges, we propose a training-free framework for multi-class prenatal US anomaly classification and localization that operates with only a few reference images per class, representing the first exploration of this setting. Our framework comprises three key components: (1) a memory bank with multi-granular prototypes that explicitly models both class-level semantics and anomaly characteristics; (2) a prototype-driven soft merging mechanism that aggregates discriminative features to detect the anomaly region; and (3) a class-aware refinement strategy that leverages prototype consistency to improve category prediction. Extensively validated on a multi-center prenatal US dataset containing 1,149 cases, with a total of 2,357 images and 9 categories, our proposed method outperforms the competitors.

Unified visual anomaly detection seeks to train a single detector that can be deployed across categories, domains, and application scenarios. In the few-shot transfer regime, the key challenge is to estimate an episode-specific boundary for an unseen target category from a small support set. Existing approaches mainly infer this boundary from normal-side evidence and provide limited abnormal-side evidence for deployment-specific tolerance. Within the normal side, they often struggle to jointly capture local correspondences and global support-query relations, making their boundaries less reliable for unseen anomalies. To address these issues, we propose UniVAD v2, a two-sided support-conditioned boundary construction framework for unified visual anomaly detection. Built on the component-patch divide-and-conquer framework of UniVAD, UniVAD v2 strengthens the normal side with an Optimal Transport-based Relational Modeling module (OTRM), which complements retrieval with support-query matching through transport-style allocation, and an Adaptive Coordination mechanism for Retrieval and Relational Modeling (ACRRM), which estimates episode-conditioned reliabilities to fuse the two sources of evidence. On the abnormal side, a Few-Shot Abnormal Reference module (FAR) converts optional abnormal references into rejection-side evidence for boundary adjustment. Experiments on six datasets spanning industrial, logical, and medical anomaly detection demonstrate strong cross-domain generalization. Under the 1N-shot protocol, UniVAD v2 improves the mean image-level AUC over UniVAD from 83.0% to 84.5%, and further reaches 85.7% in the 1N+1A-shot setting. On the MVTec-AD Severity Split (MVTec-AD-SS), UniVAD v2 achieves 96.2% image-level AUC and 96.9% pixel-level AUC, showing that abnormal references enable controllable boundary customization without retraining.

Abnormality detection in complex systems faces two practical barriers: abnormal labels are scarce, and binary labels do not quantify how far an event has departed from normal behavior. We study a normal-world modeling formulation for this setting. Instead of learning a large and incomplete space of abnormal classes, the model learns the normal world from abundant normal events and uses a few abnormal examples only to calibrate the boundary of normality. We instantiate this idea as a Hypergraph Entropic Normal-World Model. The model represents multivariate sensor windows as context-conditioned hypergraphs, where hyperedges capture high-order relations among groups of variables. It then defines abnormality by an entropy-aware normal-world energy that combines temporal prediction surprise, hypergraph consistency surprise, and latent normal-manifold departure. On the NASA C-MAPSS turbofan degradation benchmark, the proposed full energy achieves strong zero-shot and few-shot performance across all four subsets and reaches AUROC 0.9983 on FD004, the most complex setting with multiple operating conditions and fault modes. Beyond standard detection metrics, we introduce mechanistic validation tests to probe whether the energy encodes normal-world structure rather than a superficial input-output mapping. The learned energy accepts unseen healthy engines, increases along degradation trajectories, and sharply penalizes context-mismatched cross-variable coupling breaks. These results suggest that normal-world energy can serve as an anomaly score, a graded risk measure, and a testable representation of normal system behavior under severe abnormal-label scarcity.

Few-shot anomaly detection remains challenging due to limited training data. Multi-modal anomaly detection (MAD) offers a viable solution, leveraging 3D geometric cues to enrich 2D RGB representations and compensate for this scarcity. However, existing MAD methods apply spatially uniform feature processing, conflating stable macroscopic structures with high-frequency localized defect signals, exacerbating cross-modal misalignment and inflating false-positive rates. To overcome this, we present CMDS-AD, a Cross-Modal Dual-Stream Anomaly Detection framework. A LoRA-guided diffusion model generates diverse RGB samples to mitigate extreme data scarcity. For 3D normal augmentation, we employ a pre-trained diffusion model as a normal estimator. Crucially, this estimator inherently acts as a non-linear low-pass filter, directly extracting low-frequency normal representations from RGB inputs. This establishes an auxiliary estimated stream of purely low-frequency information, anchoring robust structural templates and assisting the uncompressed real stream, containing coupled high- and low-frequency components, to precisely isolate micro-defects. A Coordinate-Aware Hierarchical Feature Mapper adaptively aligns cross-modal semantics, while a multiplicative scoring mechanism filters modality-specific noise. Under the extreme 1-shot setting, CMDS-AD achieves absolute performance gains of 5.7% (I-AUROC) and 2.0% (AUPRO) on MVTec 3D-AD, alongside 7.7% and 5.6% improvements on EyeCandies, establishing a new state-of-the-art. Code is available at https://github.com/Junhaocai27/CMDS-AD

Few-shot cross-category 3D anomaly detection aims to determine whether an unknown point cloud belongs to a target normal category using only a few normal references. Existing training-based methods usually require category-wise optimization, while recent training-free methods based on multi-view CLIP visual features mainly rely on visual similarity and may be confused by geometrically similar categories. In this paper, we propose VT-3DAD, a training-free framework for cross-category 3D anomaly detection via Visual-Text Normal Space Alignment. Given few-shot normal references and a test point cloud, VT-3DAD first generates realistic multi-view depth maps and extracts view-wise features using a frozen CLIP visual encoder. The visual branch measures reference-test deviation in the multi-view feature space. In parallel, depth-aware and 3D-aware prompts are encoded by the frozen CLIP text encoder to construct textual normal anchors, which provide semantic normality constraints for the target category. The final anomaly score is obtained by fusing visual deviation from normal references and semantic deviation from the textual normal space. Experiments on the ShapeNetPart dataset demonstrate that VT-3DAD achieves state-of-the-art performance. In particular, VT-3DAD improves the one-shot average AUC-ROC from 92.49% to 94.80% compared with the visual-only baseline, while also reducing the average standard deviation from 5.64 to 3.41.

Benefiting from generalizability of vision-language models (VLMs) such as CLIP, many zero-/few-shot anomaly detection (AD) approaches have achieved impressive detection performance across various datasets. Nevertheless, they require substantial training on large auxiliary datasets to adapt VLMs to anomaly detection, and their inference largely relies on visual-text embedding similarity-based anomaly scores, lacking reasoning abilities to detect complex anomalies that require in-depth contextual understanding. To address this limitation, we propose \textbf{AnomalyAgent}, a novel training-free, agentic framework that leverages the advanced reasoning and generalization capabilities of multimodal large language models (MLLMs) for anomaly detection. The key ingredients include \textbf{1)} a comprehensive anomaly-centric toolset that enables adaptive MLLM-driven, agentic anomaly reasoning in zero-shot settings, and \textbf{2)} a customized memory module that grounds anomaly reasoning with few-shot, in-context reference examples. We extend evaluation beyond the detection of simple anomalies (e.g., surface defects like cracks and dents and clear lesions) in widely used benchmarks to more diverse types of anomalies such as logical/contextual anomalies in logistics and manufacturing settings. Extensive experiment results demonstrate that our AnomalyAgent achieves substantially better performance compared to training-free VLM-based AD and generic agentic methods, highlighting its superior generalization capability in both zero-shot and few-shot anomaly detection settings. The code implementation can be find at this address.

This paper considers a practical few-shot anomaly detection (FSAD) setting, termed discriminative FSAD, where a limited number of both normal and anomalous examples are available as references during inference. Existing FSAD methods rely on normal-only references through normality matching, ignoring the discriminative clues in anomalous references, while directly fitting both references can overfit to the seen anomalies. We introduce IDEAL, an intrinsic deviation learning framework that leverages both reference types to learn intrinsic deviation patterns characterizing generalizable abnormality as deviations from normality. IDEAL decomposes the learning process into two novel components: 1) a Normal Variation Eraser to suppress nuisance normal variations that may lead to noisy deviations from normality, thereby highlighting anomaly-relevant deviation representations; 2) an Intrinsic Deviation Encoder to decompose these denoised deviation representations into intrinsic deviation vectors capturing the most discriminative orthogonal deviation directions. At inference, IDEAL scores query-to-normal deviations preserved after projection onto the learned intrinsic deviation vectors, enabling generalization for both seen and unseen anomalies. Extensive experiments on eight real-world datasets show that IDEAL generalizes effectively to unseen anomalies and consistently outperforms existing state-of-the-art FSAD methods. Code and data are available at https://github.com/mala-lab/IDEAL.

Few-shot Generalist Anomaly Detection requires models to generalize to novel categories without retraining, posing significant challenges in real-world scenarios with scarce samples and rapidly changing categories. Existing CLIP-based methods face two major challenges: coarse-grained unified text prompts struggle to adapt to fine-grained foreground-background differences, causing cross-granularity mismatch; and fine-tuning on auxiliary datasets disrupts CLIP's inherent open-world generalization due to domain shift, leading to cross-category generalization degradation. To address these, we propose to shift multimodal alignment entirely into a unified residual space, where residual representations naturally eliminate fine-grained normal feature differences across regions and class-specific biases, simultaneously resolving both problems. Based on this insight, Res$^2$CLIP, the first residual-to-residual alignment framework that symmetrically bridges visual and text modalities within CLIP's residual space, is designed. The framework is developed from a residual perspective into three branches: a text prompt-based branch, a visual prompt-based branch, and a novel residual-to-residual alignment branch. All learnable optimizations are constrained within the residual domain, and the residual alignment optimization objectives are designed to force the model to focus on relative anomaly deviations rather than optimizing class-specific features. Experiments on multiple datasets demonstrate the effectiveness of our architecture. The code is available at https://github.com/hito2448/Res2CLIP.

Few-shot anomaly detection (FSAD) has made significant strides, yet existing methods still face critical challenges: (i) dependence on task- or dataset-specific training/fine-tuning, (ii) reliance on language supervision or carefully hand-crafted prompts, and (iii) limited robustness across domains. In this paper, we introduce HyperFSAD, a novel FSAD framework that is training-free, language-free, and robust across domains, offering a powerful solution to these challenges. Built upon DINOv3 and a hypergraph-based inference mechanism, our approach performs inference without any task-specific optimization or text prompts, while remaining competitive. Specifically, we replace sensitive nearest-neighbor / top-$n$ matching with \textbf{Sparse Hyper Matching}: \textit{sparsemax} first selects the most relevant support patches, which are then aggregated into a \textit{hyperedge} as compact normal evidence to suppress background noise and distractors. We further introduce \textbf{Dual-Branch Image Scoring}, which fuses \emph{spatial anomaly evidence} from the patch-grid anomaly map with \emph{global semantic deviation} captured by support-aware CLS matching, yielding a robust image-level anomaly score in a strictly visual manner. Notably, all components of HyperFSAD are purely visual, eliminating the need for labor-intensive hand-crafted text prompts. Under the stringent training-free and language-free setting, HyperFSAD achieves state-of-the-art performance across six datasets spanning four industrial datasets (MVTecAD, VisA, MPDD, BTAD) and two medical datasets (RESC, BraTS).

As a classic vision task, anomaly detection has been widely applied in industrial inspection and medical imaging. In this task, data scarcity is often a frequently-faced issue. To solve it, the few-shot anomaly detection (FSAD) scheme is attracting increasing attention. In recent years, beyond traditional visual paradigm, Vision-Language Model (VLM) has been extensively explored to boost this field. However, in currently-existing VLM-based FSAD schemes, almost all perform anomaly inference only by pairwise feature matching, ignoring structural dependencies and global consistency. To further redound to FSAD via VLM, we propose a Heterogeneous Hypergraph Vision-Language Reasoning (H2VLR) framework. It reformulates the FSAD as a high-order inference problem of visual-semantic relations, by jointly modeling visual regions and semantic concepts in a unified hypergraph. Experimental comparisons verify the effectiveness and advantages of H2VLR. It could often achieve state-of-the-art (SOTA) performance on representative industrial and medical benchmarks. Our code will be released upon acceptance.