Hand-Eye Calibration

Accurate hand-eye calibration is crucial for precision manipulation. Traditional methods rely on markers, with their precision dependent on marker accuracy and observability. In contrast, markerless methods, such as learning-based approaches, use deep neural networks to directly extract keypoints or features from images, enabling the computation of hand-eye transformation with a single image and without the need for physical markers. Recently, differentiable rendering-based methods for hand-eye calibration have leveraged physical models to render binary masks and compare them with observations, enabling hand-eye calibration without fiducial markers in the calibration stage and providing interpretable optimization. While the state-of-the-art differentiable rendering methods achieve remarkable accuracy, the use of binary masks can result in the loss of internal profile details, reducing precision. Additionally, these methods can also suffer from unstable optimization and local minima. In this study, we propose a novel RGB-based differentiable rendering framework that provides richer geometric and appearance cues by incorporating color and mask geometric features, thereby improving calibration accuracy and optimization stability. Additionally, we propose a mask-guided image-to-image translation method to ensure explicit preservation of color and geometric consistency throughout the translation. Our approach is validated through both simulation and real-world experiments, with results demonstrating strong accuracy and robustness and clear improvements over existing differentiable rendering methods. Our method achieves a grasping success rate of 88.9% and insertion success rate of 57.4% on the UR5e real-world experiment, outperforming the state-of-the-art differentiable rendering hand-eye calibration method EasyHeC by 46.3 and 48.1 percentage points, respectively.

We present VGM-VS, a visual servoing method built on a pretrained feed-forward visual geometry model. Given the current view and a reference image captured at the target configuration, we estimate the relative camera pose with a visual geometry model and apply it iteratively as the pose increment of a closed-loop pose-based visual servoing (PBVS) scheme. The geometry-aware representation acquired from large-scale pretraining keeps this estimate reliable when the target is occluded, weakly textured, or covers only a small part of the image. However, the scale ambiguity inherent to these models leaves the predicted translation defined up to an unknown scale, while the pose increment must be metric for robot control. We close this gap with a scene-specific metric adaptation: the robot autonomously records image--pose pairs along a predefined motion starting from the target pose, and we fine-tune the camera head on these data, jointly learning the hand--eye transform and thus removing the need for a dedicated calibration process. We evaluate our method on three real-world assembly tasks with demanding tolerances: USB-C cable picking, cable insertion, and RAM insertion. Running in real time at 30Hz, VGM-VS converges to submillimeter terminal accuracy on the cable tasks, and reaches success rates of 90--100% when the target is moved during servoing. It converges in all trials under initial displacements of up to 30cm from the reference pose and with 50% of the target object occluded, outperforming the compared visual servoing baselines.

We present a laser-tracker-assisted hand-eye calibration method for camera-equipped mobile robots. The method combines laser-tracker-based 3D metrology with camera-based 2D observations. Building on our previous laser-tracker-assisted camera-to-robot calibration method for ground-observing mobile robots, we present a generalized formulation for calibrating the camera pose in the coordinate system of tracker-localized mobile robots. The new approach relaxes assumptions of our previous method on robot and camera configuration by chaining multiple calibration targets resulting in a more general approach supporting various camera-equipped mobile robot systems.

Real-world robot deployment rarely maintains the training-stage camera setup, where cameras often experience repositioning or remounting depending on actual scenarios. Existing view-robust Vision-Language-Action (VLA) policies tolerate such camera variations only when the camera extrinsics are explicitly provided, making them fragile and hard to use especially when view robustness is critical. We argue that the policy should not be told where the camera is, but rather figure it out by itself. To this end, we introduce Camera-Centric VLA (CamVLA), a new VLA model that decouples manipulation controls from camera geometry by predicting (i) a camera-centric end-effector action expressed in the local camera frame, and (ii) a 6-DoF hand-eye matrix relating cameras to the robot base. A deterministic geometric transformation composes the two predictions into a robot base-frame action. This disentangles how I should move in pose-independent camera-centric action generation from where I am looking from in camera-perspective geometric grounding. The resulting policy is calibration-free, depth-free, and single-view, requiring only a single monocular RGB image as the visual observation and task instruction at deployment. Evaluations in both simulation and real-world robot data show that CamVLA consistently improves success rates across diverse unseen viewpoints. Project page: https://alibaba-damo-academy.github.io/CamVLA/.

Accurate assessment of sweetness is essential for quality control in agriculture, yet conventional methods rely on destructive sampling and are difficult to scale. This thesis presents a robotic arm-based spectral sensing system for strawberry detection, localization, approach, and non-destructive sweetness estimation. The system integrates perception, calibration, and robotic control in a closed-loop pipeline. A YOLOv11s detector is adopted for real-time strawberry detection, while RGB-ToF calibration and mask-to-depth alignment are used to obtain geometrically consistent target localization. A custom eye-in-hand hand-eye calibration workflow is developed to estimate the rigid transform between gripper_link and cam_front, enabling reliable transformation of fruit targets into the robot base frame. Based on these estimates, the robot executes a waypoint-based search and an incremental closed-loop approach strategy to position the sensor at optimal working distance for sweetness sensing. Experimental results show strong end-to-end performance (88.10% success over 42 trials), with robust detection (95.24%) and successful approach execution once a target is detected (100% conditional success). Hand-eye calibration comparisons indicate that although Andreff yields the smallest translation norm in single-run results, the Park method provides better cross-sample consistency and therefore more stable downstream robot behavior. The residual failures are concentrated in the sensing stage, especially valid-region extraction for sweetness estimation under difficult depth/reflectance conditions. Overall, this work demonstrates the feasibility of integrating RGB-ToF perception, robotic manipulation, and non-destructive sensing for practical strawberry quality assessment, and provides a scalable baseline for future integration of learning-based policies such as Vision-Language-Action models.

This article proposes a general optimization framework for solving hand-eye calibration problem. Unlike traditional methods, an iterative algorithm based on Lie algebra that achieves approximately global optimal solutions is developed. During the optimization process, the method strictly preserves the structural constraints of the calibration parameters and enables synchronized updates between calibration parameters. Recognizing that data used in real-word hand-eye calibration often contain uncertainty, especially in over-loading and large workspace industrial robot scenarios, which can significantly degrade accuracy, and accurately modeling such uncertainty is inherently difficult, this article avoids explicit uncertainty modeling. Instead, an uncertainty metric to evaluate the relative uncertainty between data sources is introduced and used to dynamically refine the iterative process. To further enhance convergence efficiency, an effective initial solution generation method that improves overall stability and accuracy is designed. Numerical simulations and real-world experiments validate the effectiveness of the proposed approach, and in synthetic datasets, the proposed approach improves the estimation accuracy by at least 67% under high-uncertainty conditions compared with the existing methods.

Hand-eye calibration through visual localization is a critical capability for robotic manipulation in open-world environments. However, most deep learning-based calibration models suffer from catastrophic forgetting when adapting into unseen data amongst open-world scene changes, while simple rehearsal-based continual learning strategy cannot well mitigate this issue. To overcome this challenge, we propose a continual hand-eye calibration framework, enabling robots to adapt to sequentially encountered open-world manipulation scenes through spatially replay strategy and structure-preserving distillation. Specifically, a Spatial-Aware Replay Strategy (SARS) constructs a geometrically uniform replay buffer that ensures comprehensive coverage of each scene pose space, replacing redundant adjacent frames with maximally informative viewpoints. Meanwhile, a Structure-Preserving Dual Distillation (SPDD) is proposed to decompose localization knowledge into coarse scene layout and fine pose precision, and distills them separately to alleviate both types of forgetting during continual adaptation. As a new manipulation scene arrives, SARS provides geometrically representative replay samples from all prior scenes, and SPDD applies structured distillation on these samples to retain previously learned knowledge. After training on the new scene, SARS incorporates selected samples from the new scene into the replay buffer for future rehearsal, allowing the model to continuously accumulate multi-scene calibration capability. Experiments on multiple public datasets show significant anti scene forgetting performance, maintaining accuracy on past scenes while preserving adaptation to new scenes, confirming the effectiveness of the framework.

This work presents an RGB-D imaging-based approach to marker-free hand-eye calibration using a novel implementation of the iterative closest point (ICP) algorithm with a robust point-to-plane (PTP) objective formulated on a Lie algebra. Its applicability is demonstrated through comprehensive experiments using three well known serial manipulators and two RGB-D cameras. With only three randomly chosen robot configurations, our approach achieves approximately 90% successful calibrations, demonstrating 2-3x higher convergence rates to the global optimum compared to both marker-based and marker-free baselines. We also report 2 orders of magnitude faster convergence time (0.8 +/- 0.4 s) for 9 robot configurations over other marker-free methods. Our method exhibits significantly improved accuracy (5 mm in task space) over classical approaches (7 mm in task space) whilst being marker-free. The benchmarking dataset and code are open sourced under Apache 2.0 License, and a ROS 2 integration with robot abstraction is provided to facilitate deployment.