Resolution

Federated Learning (FL) typically assumes unconditional collaboration, a premise that overlooks the complexities of real-world, multi-stakeholder environments in which clients may need to exclude one another for strategic, regulatory, or competitive reasons. This paper addresses this gap, which we term 'client-level disagreements,' by first introducing a taxonomy of such scenarios. We then propose a robust, multi-track resolution strategy that guarantees strict client exclusion by creating and managing isolated model update paths ('tracks'), thereby preventing the cross-contamination and unfairness issues present in naive strategies. Through an empirical evaluation of our custom simulation system across 34 scenarios using the MNIST and N-CMAPSS datasets, we validate that our approach correctly handles permanent, temporal, and overlapping disagreement patterns. Our scalability analysis reveals the server-side resolution algorithm's overhead is negligible (<1 ms per round) even under heavy load. The primary scalability constraint is the client-side training load from participating in multiple tracks, a cost that we show can be effectively mitigated by a submodel reuse strategy. This work presents a scalable and architecturally sound method for managing client-level disagreements, and enhances the practical applicability of FL in settings where policy compliance and strategic control are non-negotiable.

In spite of the utility of 3-D electron back-scattered diffraction (EBSD) microscopy, the data collection process can be time-consuming with serial-sectioning. Hence, it is natural to look at other modalities, such as polarized light (PL) data, to accelerate EBSD data collection, supplemented with shared information. Complementarily, features in chaotic PL data could even be enriched with a handful of EBSD measurements. To inherently learn the complex dynamics between EBSD and PL to solve these inverse problems, we use an unconditional multimodal diffusion model, motivated by progress in diffusion models for inverse problems. Although trained solely on synthetic data once, our model has strong generalizable capabilities on real data which can be low-resolution, noisy, corrupted, and misregistered. With inference-time scaling, we show gains in performance on a variety of objectives including grain boundary prediction, super-resolution, and denoising. With our model, we demonstrate that there is little difference from full resolution performance with only 25% (1/4 the resolution) of EBSD data and corrupted PL data.

With the development of deep learning, ViT-based stereo matching methods have made significant progress due to their remarkable robustness and zero-shot ability. However, due to the limitations of ViTs in handling resolution sensitivity and their relative neglect of local information, the ability of ViT-based methods to predict details and handle arbitrary-resolution images is still weaker than that of CNN-based methods. To address these shortcomings, we propose MLG-Stereo, a systematic pipeline-level design that extends global modeling beyond the encoder stage. First, we propose a Multi-Granularity Feature Network to effectively balance global context and local geometric information, enabling comprehensive feature extraction from images of arbitrary resolution and bridging the gap between training and inference scales. Then, a Local-Global Cost Volume is constructed to capture both locally-correlated and global-aware matching information. Finally, a Local-Global Guided Recurrent Unit is introduced to iteratively optimize the disparity locally under the guidance of global information. Extensive experiments are conducted on multiple benchmark datasets, demonstrating that our MLG-Stereo exhibits highly competitive performance on the Middlebury and KITTI-2015 benchmarks compared to contemporaneous leading methods, and achieves outstanding results in the KITTI-2012 dataset.

Large-scale automated morphometric analysis of brain MRI is limited by the thick-slice, anisotropic acquisitions prevalent in routine clinical practice. Existing generative super-resolution (SR) methods produce visually compelling isotropic volumes but often introduce anatomical hallucinations, systematic volumetric overestimation, and structural distortions that compromise downstream quantitative analysis and diagnostic safety. To address this, we propose CAHAL (Clinically Applicable resolution enHAncement for Low-resolution MRI scans), a hallucination-robust, physics-informed resolution enhancement framework that operates directly in the patient's native acquisition space. CAHAL employs a deterministic bivariate Mixture of Experts (MoE) architecture routing each input through specialised residual 3D U-Net experts conditioned on both volumetric resolution and acquisition anisotropy, two independent descriptors of clinical MRI acquisition. Experts are optimised with a composite loss combining edge-penalised spatial reconstruction, Fourier-domain spectral coherence matching, and a segmentation-guided semantic consistency constraint. Training pairs are generated on-the-fly via physics-based degradation sampled from a large-scale real-world database, ensuring robust generalisation. Validated on T1-weighted and FLAIR sequences against generative baselines, CAHAL achieves state-of-the-art results, improving the best related methods in terms of accuracy and efficiency.

Diabetic retinopathy (DR) is a leading cause of vision impairment worldwide, and automated grading systems play a crucial role in large-scale screening programs. However, deep learning models often exhibit degraded performance when deployed across datasets acquired under different imaging conditions. This study presents a robust dual-resolution deep learning framework for DR grading that integrates attention-based feature fusion with ordinal regression to improve cross-dataset generalization. The proposed method employs two parallel EfficientNet backbones operating at different spatial resolutions to capture complementary retinal features. A learnable attention mechanism adaptively fuses multi-resolution representations, while an ordinal regression formulation based on the cumulative link model (CORAL) explicitly accounts for the ordered nature of DR severity levels. To mitigate domain discrepancies between datasets, a preprocessing strategy combining circular cropping, contrast enhancement, and histogram matching is applied. The model was trained on the APTOS 2019 dataset and evaluated on both an internal validation split and an external Messidor-2 test set. Experimental results demonstrate strong grading performance, achieving a quadratic weighted kappa (QWK) of 0.88 on the APTOS validation set and 0.68 on the unseen Messidor-2 dataset, indicating improved robustness for cross-dataset DR grading applications.

Systolic murmurs are extra heart sounds that occur during the contraction phase of the cardiac cycle, often indicating heart abnormalities caused by turbulent blood flow. Their intensity, pitch, and quality vary, requiring precise identification for the accurate diagnosis of cardiac disorders. This study presents an automatic classification system for systolic murmurs using a feature extraction module, followed by a classification model. The feature extraction module employs complex orthogonal matching pursuit to project single or multiple murmur segments onto a redundant dictionary composed of multiresolution complex Gabor basis functions (GBFs). The resulting projection weights are split and reshaped into variable-resolution time--frequency feature matrices. Processing multiple segments of a single recording using a shared dictionary mitigates murmur variability. This is achieved by learning the weights for each segment while enforcing that they correspond to the same set of basis functions in the dictionary, promoting consistent time--frequency feature matrices. The classification model is built based on a vision transformer to process multiple input matrices of different resolutions by passing each through a convolutional neural network for patch tokenization. All embedding tokens are then concatenated to form a matrix and forwarded to an encoder layer that includes multihead attention, residual connections, and a convolutional network with a kernel size of one. This integration of multiresolution feature extraction with transformer-based feature classification enhances the accuracy and reliability of heart murmur identification. An experimental analysis of four types of systolic murmurs from the CirCor DigiScope dataset demonstrates the effectiveness of the system, achieving a classification accuracy of $95.96\%$.

Text-to-image generation powered by Diffusion Transformers (DiTs) has made remarkable strides, yet remote sensing (RS) synthesis lags behind due to two barriers: the absence of a domain-specialized DiT prior and the prohibitive cost of training at the large resolutions that RS applications demand. Training-free resolution promotion via Rotary Position Embedding (RoPE) rescaling offers a practical remedy, but every existing method applies a static positional scaling rule throughout the denoising process. This uniform compression is particularly harmful for RS imagery, whose substantially denser medium- and high-frequency energy encodes the fine structures critical for aerial-scene realism, such as vehicles, building contours, and road markings. Addressing both challenges requires a domain-specialized generative prior coupled with a denoising-aware positional adaptation strategy. To this end, we fine-tune FLUX on over 100,000 curated RS images to build a strong domain prior (RS-FLUX), and propose Spectrum-aware Highly-dynamic Adaptation for Resolution Promotion (SHARP), a training-free method that introduces a rational fractional time schedule k_rs(t) into RoPE. SHARP applies strong positional promotion during the early layout-formation stage and progressively relaxes it during detail recovery, aligning extrapolation strength with the frequency-progressive nature of diffusion denoising. Its resolution-agnostic formulation further enables robust multi-scale generation from a single set of hyperparameters. Extensive experiments across six square and rectangular resolutions show that SHARP consistently outperforms all training-free baselines on CLIP Score, Aesthetic Score, and HPSv2, with widening margins at more aggressive extrapolation factors and negligible computational overhead. Code and weights are available at https://github.com/bxuanz/SHARP.

Diffusion distillation is central to accelerating image and video generation, yet existing methods are fundamentally limited by the denoising process, where step reduction has largely saturated. Partial timestep low-resolution generation can further accelerate inference, but it suffers noticeable quality degradation due to cross-resolution distribution gaps. We propose Cross-Resolution Distribution Matching Distillation (RMD), a novel distillation framework that bridges cross-resolution distribution gaps for high-fidelity, few-step multi-resolution cascaded inference. Specifically, RMD divides the timestep intervals for each resolution using logarithmic signal-to-noise ratio (logSNR) curves, and introduces logSNR-based mapping to compensate for resolution-induced shifts. Distribution matching is conducted along resolution trajectories to reduce the gap between low-resolution generator distributions and the teacher's high-resolution distribution. In addition, a predicted-noise re-injection mechanism is incorporated during upsampling to stabilize training and improve synthesis quality. Quantitative and qualitative results show that RMD preserves high-fidelity generation while accelerating inference across various backbones. Notably, RMD achieves up to 33.4X speedup on SDXL and 25.6X on Wan2.1-14B, while preserving high visual fidelity.

Face super-resolution aims to recover high-quality facial images from severely degraded low-resolution inputs, but remains challenging due to the loss of fine structural details and identity-specific features. This work introduces SwinIFS, a landmark-guided super-resolution framework that integrates structural priors with hierarchical attention mechanisms to achieve identity-preserving reconstruction at both moderate and extreme upscaling factors. The method incorporates dense Gaussian heatmaps of key facial landmarks into the input representation, enabling the network to focus on semantically important facial regions from the earliest stages of processing. A compact Swin Transformer backbone is employed to capture long-range contextual information while preserving local geometry, allowing the model to restore subtle facial textures and maintain global structural consistency. Extensive experiments on the CelebA benchmark demonstrate that SwinIFS achieves superior perceptual quality, sharper reconstructions, and improved identity retention; it consistently produces more photorealistic results and exhibits strong performance even under $8\times$ magnification, where most methods fail to recover meaningful structure. SwinIFS also provides an advantageous balance between reconstruction accuracy and computational efficiency, making it suitable for real-world applications in facial enhancement, surveillance, and digital restoration. Our code, model weights, and results are available at https://github.com/Habiba123-stack/SwinIFS.

Rotary positional embeddings (RoPE) are widely used in diffusion transformers (DiTs) to encode spatial relationships, yet their behavior with mixed-resolution tokens remains underexplored. A natural approach is to rescale token positions from different resolutions into a unified coordinate system before attention, but we show this fails. Our analysis shows that with RoPE, the attention similarity score is a highly structured and periodic function of token distance, so rescaling distances across resolutions moves token pairs to different regions of this periodic function, leading to incorrect attention scores. Motivated by this, we introduce Phase-Aligned Mixed-Resolution Attention (PMA), a training-free mechanism that stabilizes mixed-resolution attention. PMA modifies the RoPE position mapping to enforce a consistent positional scale for every query-key pair, ensuring that relative distances are evaluated under a single reference scale. To further improve local coherence near resolution transitions, we incorporate a lightweight boundary refinement module that softly exchanges features across adjacent scales. Experiments on image and video diffusion models validate our analysis and demonstrate consistent improvements in visual fidelity and computational efficiency.

Sleep stage classification is critical for diagnosing and managing disorders like sleep apnea and insomnia. However, conventional methods like polysomnography are costly and impractical for long-term, home-based monitoring. This study presents an energy-efficient approach for detecting four sleep stages (wake, rapid eye movement (REM), light sleep, deep sleep) using a single-lead electrocardiogram (ECG) signal. We evaluate various machine learning and deep learning models, introducing two windowing strategies: (1) a 5-minute window with 30-second steps for machine learning and (2) a 30-second window with 10-second steps for deep learning, enabling 10-second temporal resolution for real-time predictions. While deep learning models like MobileNet-v1 achieve high accuracy (92%) and F1-score (91%), their energy demands make them unsuitable for wearables. To address this, we design SleepLiteCNN, optimized for ECG-based sleep staging, achieving 89% accuracy and 89% F1-score while minimizing energy use. Applying 8-bit quantization further reduces energy consumption to 5.48 microJ per inference, with 90% accuracy and F1-score. Additionally, field-programmable gate array (FPGA) deployment shows significant reductions in resource usage. This approach provides a practical, energy-efficient solution for continuous ECG-based sleep monitoring in resource-constrained wearable devices.

Single-source remote sensing object detection using optical or SAR images struggles in complex environments. Optical images offer rich textural details but are often affected by low-light, cloud-obscured, or low-resolution conditions, reducing the detection performance. SAR images are robust to weather, but suffer from speckle noise and limited semantic expressiveness. Optical and SAR images provide complementary advantages, and fusing them can significantly improve the detection accuracy. However, progress in this field is hindered by the lack of large-scale, standardized datasets. To address these challenges, we propose a new comprehensive dataset for optical-SAR fusion object detection, named Multi-resolution, Multi-polarization, Multi-scene, Multi-source SAR dataset (M4-SAR). It contains 112,174 instance-level aligned image pairs and nearly one million labeled instances with arbitrary orientations, spanning six key categories. To enable standardized evaluation, we develop a unified benchmarking toolkit that integrates six state-of-the-art multi-source fusion methods. Additionally, we propose E2E-OSDet, a novel end-to-end multi-source fusion detection framework that mitigates cross-domain discrepancies and establishes a robust baseline for future studies. Extensive experiments on M4-SAR demonstrate that fusing optical and SAR data can improve mAP by 5.7% over single-source inputs, with particularly significant gains in complex environments. The dataset and code are publicly available at https://github.com/wchao0601/M4-SAR.