Robot Dynamics Identification

Overview

Robot dynamics identification studies how to estimate a robot’s motion model so it can predict forces and trajectories for control, simulation, and transfer from simulation to hardware. Common approaches use designed excitation motions with least-squares or Bayesian estimation, online filters and moving-horizon methods, and differentiable simulation; neural networks often capture residual effects that simpler models miss. These methods are tested on manipulators, legged robots, quadrotors, underwater vehicles, and systems with contact or flexible components, where better models can improve tracking and sim-to-real transfer. A central challenge is balancing physically consistent, interpretable models with flexible models that capture complex effects, especially when parameters are hard to distinguish or measurements are limited.

Latest papers

64 papers6 papers in the last four weeks, down 33% on the four weeks before. 0.0% of all new papers.

Feb 22, 2026

Vid2Sid: Videos Can Help Close the Sim2Real Gap

Calibrating a robot simulator's physics parameters (friction, damping, material stiffness) to match real hardware is often done by hand or with black-box optimizers that reduce error but cannot explain which physical discrepancies drive the error. When sensing is limited to external cameras, the problem is further compounded by perception noise and the absence of direct force or state measurements. We present Vid2Sid, a video-driven system identification pipeline that couples foundation-model perception with a VLM-in-the-loop optimizer that analyzes paired sim-real videos, diagnoses concrete mismatches, and proposes physics parameter updates with natural language rationales. We evaluate our approach on a tendon-actuated finger (rigid-body dynamics in MuJoCo) and a deformable continuum tentacle (soft-body dynamics in PyElastica). On sim2real holdout controls unseen during training, Vid2Sid achieves the best average rank across all settings, matching or exceeding black-box optimizers while uniquely providing interpretable reasoning at each iteration. Sim2sim validation confirms that Vid2Sid recovers ground-truth parameters most accurately (mean relative error under 13% vs. 28--98%), and ablation analysis reveals three calibration regimes. VLM-guided optimization excels when perception is clean and the simulator is expressive, while model-class limitations bound performance in more challenging settings.
Feb 18, 2026

System Identification under Constraints and Disturbance: A Bayesian Estimation Approach

We introduce a Bayesian system identification (SysID) framework for jointly estimating robot's state trajectories and physical parameters with high accuracy. It embeds physically consistent inverse dynamics, contact and loop-closure constraints, and fully featured joint friction models as hard, stage-wise equality constraints. It relies on energy-based regressors to enhance parameter observability, supports both equality and inequality priors on inertial and actuation parameters, enforces dynamically consistent disturbance projections, and augments proprioceptive measurements with energy observations to disambiguate nonlinear friction effects. To ensure scalability, we derive a parameterized equality-constrained Riccati recursion that preserves the banded structure of the problem, achieving linear complexity in the time horizon, and develop computationally efficient derivatives. Simulation studies on representative robotic systems, together with hardware experiments on a Unitree B1 equipped with a Z1 arm, demonstrate faster convergence, lower inertial and friction estimation errors, and improved contact consistency compared to forward-dynamics and decoupled identification baselines. When deployed within model predictive control frameworks, the resulting models yield measurable improvements in tracking performance during locomotion over challenging environments.
Feb 2, 2026

Bridging the Sim-to-Real Gap with multipanda_ros2: A Real-Time ROS2 Framework for Multimanual Systems

We present multipanda_ros2multipanda\_ros2, a novel open-source ROS2 architecture for multi-robot control of Franka Robotics robots. Leveraging ros2 control, this framework provides native ROS2 interfaces for controlling any number of robots from a single process. Our core contributions address key challenges in real-time torque control, including interaction control and robot-environment modeling. A central focus of this work is sustaining a 1kHz control frequency, a necessity for real-time control and a minimum frequency required by safety standards. Moreover, we introduce a controllet-feature design pattern that enables controller-switching delays of ≤2\le 2 ms, facilitating reproducible benchmarking and complex multi-robot interaction scenarios. To bridge the simulation-to-reality (sim2real) gap, we integrate a high-fidelity MuJoCo simulation with quantitative metrics for both kinematic accuracy and dynamic consistency (torques, forces, and control errors). Furthermore, we demonstrate that real-world inertial parameter identification can significantly improve force and torque accuracy, providing a methodology for iterative physics refinement. Our work extends approaches from soft robotics to rigid dual-arm, contact-rich tasks, showcasing a promising method to reduce the sim2real gap and providing a robust, reproducible platform for advanced robotics research.
Oct 31, 2025

Learning Soft Robotic Dynamics with Active Exploration

Soft robots offer adaptability and safety in unstructured environments, yet their compliant, high-dimensional, and nonlinear dynamics make modeling for control difficult. Existing data-driven approaches often fail to generalize, constrained by narrowly focused task demonstrations or inefficient random exploration. We introduce an uncertainty-aware active exploration framework that autonomously learns task-agnostic and generalizable dynamics models of soft robotic systems. We evaluate this framework on three simulated platforms---a continuum arm, an articulated fish in fluid, and a musculoskeletal leg---and on a real-world pneumatically actuated continuum arm. Compared with random exploration and task-specific baseline, our method achieves higher modeling accuracy by actively collecting informative data. This improved model quality yields higher returns in zero-shot control on unseen tasks and robust performance under sensing noise, actuation delays, and material nonlinearities. These results demonstrate that uncertainty-driven active exploration enables data-efficient dynamics learning across soft robotic morphologies, supporting autonomous and adaptable control for compliant robots.