cs.RODec 13, 2025

Illumination-Robust Localization around Unknown Space Objects using Multispectral Image Fusion

Authors: Eric J. Elias, Michael Esswein, Jonathan P. How, David W. Miller

Organizations: Massachusetts Institute of Technology, Cambridge, MA, 02139, USA · The Charles Stark Draper Laboratory Inc., Cambridge, MA 02139, USA

Abstract

As on-orbit operations grow, so does the need for precise navigation around unknown resident space objects (RSOs), such as spacecraft, debris, and asteroids. Simultaneous Localization and Mapping (SLAM) algorithms are often studied for mapping an RSO and estimating the inspector's relative pose, but conventional cameras struggle during eclipse, while lidar, though illumination-robust, has higher SWaP. Thermal-infrared cameras track targets through difficult lighting but lack the resolution and feature-richness of visible cameras. Images of a target satellite in low Earth orbit are simulated in both visible and thermal bands, and fused at the pixel level to combine each sensor's strengths for front-end tracking. Thermal imagery is further exploited by a novel silhouette-based visual place recognition (VPR) method that detects loop closures without training, runs entirely on CPU, and outperforms all baselines. Integrated SLAM performance is compared using visible, thermal-infrared, and fused imagery across lighting conditions, trajectories, and place recognition methods; using fused imagery for front-end tracking and our thermal-silhouette place recognition method performs best. The results show that visible and thermal modalities each provide unique information that is exploited differently at various stages of navigation. These low-SWaP sensors could ultimately enable reliable proximity operations on smaller, lower-cost spacecraft.

Figures & tables

Explore similar work

Jun 28, 2026

PL-LIT: A LiDAR-Inertial-Thermal SLAM Using Point-Line Features and Thermographic Mapping

Thermal imaging is resilient to adverse conditions, such as intense illumination, low-light operation, and fog, and can therefore mitigate odometry degradation when visible-spectrum imagery becomes unreliable. Nevertheless, most thermal cameras employ automatic gain control (AGC), and thermal images often present low global contrast despite containing informative edge structures. These characteristics undermine brightness constancy and cause conventional optical flow tracking-based odometry pipelines that fundamentally rely on the brightness constancy assumption across consecutive frames. To address these issues, we propose a general LiDAR-Inertial-Thermal SLAM system that accommodates both visible-light and thermal cameras. PL-LIT combines an online photometric calibration module with a deep neural network for point-line feature extraction, enabling more stable and repeatable thermal tracking. For state estimation, we design a tightly coupled LiDAR-Inertial-Thermal formulation within an Error-State Iterated Kalman Filter (ESIKF). We further introduce a line-feature constraint scheme ensuring the reliability of geometric constraints across varying thermal appearances. In addition, PL-LIT builds a probabilistic thermal-intensity voxel map, which supports real-time thermal anomaly detection. Extensive experiments demonstrate that PL-LIT exhibits generality and robustness in visible-light environments, achieves state-of-the-art performance on long-range thermal infrared datasets, and provides practical safety inspection functionality based on thermographic mapping.
Mar 20, 2026

TRGS-SLAM: IMU-Aided Gaussian Splatting SLAM for Blurry, Rolling Shutter, and Noisy Thermal Images

Thermal cameras offer several advantages for simultaneous localization and mapping (SLAM) with mobile robots: they provide a passive, low-power solution to operating in darkness, are invariant to rapidly changing or high dynamic range illumination, and can see through fog, dust, and smoke. However, uncooled microbolometer thermal cameras, the only practical option in most robotics applications, suffer from significant motion blur, rolling shutter distortions, and fixed pattern noise. In this paper, we present TRGS-SLAM, a 3D Gaussian Splatting (3DGS) based thermal inertial SLAM system uniquely capable of handling these degradations. To overcome the challenges of thermal data, we introduce a model-aware 3DGS rendering method and several general innovations to 3DGS SLAM, including B-spline trajectory optimization with a two-stage IMU loss, view-diversity-based opacity resetting, and pose drift correction schemes. Our system demonstrates accurate tracking on real-world, fast motion, and high-noise thermal data that causes all other tested SLAM methods to fail. Moreover, through offline refinement of our SLAM results, we demonstrate thermal image restoration competitive with prior work that required ground truth poses.
Mar 16, 2026

Thermal Image Refinement with Depth Estimation using Recurrent Networks for Monocular ORB-SLAM3

Autonomous navigation in GPS-denied and visually degraded environments remains challenging for unmanned aerial vehicles (UAVs). To this end, we investigate the use of a monocular thermal camera as a standalone sensor on a UAV platform for real-time depth estimation and simultaneous localization and mapping (SLAM). To extract depth information from thermal images, we propose a novel pipeline employing a lightweight supervised network with recurrent blocks (RBs) integrated to capture temporal dependencies, enabling more robust predictions. The network combines lightweight convolutional backbones with a thermal refinement network (T-RefNet) to refine raw thermal inputs and enhance feature visibility. The refined thermal images and predicted depth maps are integrated into ORB-SLAM3, enabling thermal-only localization. Unlike previous methods, the network is trained on a custom non-radiometric dataset, obviating the need for high-cost radiometric thermal cameras. Experimental results on datasets and UAV flights demonstrate competitive depth accuracy and robust SLAM performance under low-light conditions. On the radiometric VIVID++ (indoor-dark) dataset, our method achieves an absolute relative error of approximately 0.06, compared to baselines exceeding 0.11. In our non-radiometric indoor set, baseline errors remain above 0.24, whereas our approach remains below 0.10. Thermal-only ORB-SLAM3 maintains a mean trajectory error under 0.4 m.