Image Measurement Method for Automatic Insertion of Forks into Inclined Pallet

This paper proposes a control method for autonomous forklifts to unload pallets on inclined surfaces, enabling the fork to be withdrawn without dragging the pallets. The proposed method applies the Iterative Closest Point (ICP) algorithm to point clouds measured from the upper region of the pallet and thereby tracks the relative position and attitude angle difference between the pallet and the fork during the unloading operation in real-time. According to the tracking result, the fork is aligned parallel to the target surface. After the fork is aligned, it is possible to complete the unloading process by withdrawing the fork along the tilt, preventing any dragging of the pallet. The effectiveness of the proposed method is verified through dynamic simulations and experiments using a real forklift that replicate unloading operations onto the inclined bed of a truck.

Image Goal Navigation (ImageNav) is evaluated by a coarse success criterion, the agent must stop within 1m of the target, which is sufficient for finding objects but falls short for downstream tasks such as grasping that require precise positioning. We introduce AnyImageNav, a training-free system that pushes ImageNav toward this more demanding setting. Our key insight is that the goal image can be treated as a geometric query: any photo of an object, a hallway, or a room corner can be registered to the agent's observations via dense pixel-level correspondences, enabling recovery of the exact 6-DoF camera pose. Our method realizes this through a semantic-to-geometric cascade: a semantic relevance signal guides exploration and acts as a proximity gate, invoking a 3D multi-view foundation model only when the current view is highly relevant to the goal image; the model then self-certifies its registration in a loop for an accurate recovered pose. Our method sets state-of-the-art navigation success rates on Gibson (93.1%) and HM3D (82.6%), and achieves pose recovery that prior methods do not provide: a position error of 0.27m and heading error of 3.41 degrees on Gibson, and 0.21m / 1.23 degrees on HM3D, a 5-10x improvement over adapted baselines.Our project page: https://yijie21.github.io/ain/

Time-of-flight cameras are popular in robotics because they provide direct depth information and are compact, inexpensive, and less dependent on ambient visible light. However, their low spatial resolution and depth noise raise questions about their suitability for stabilizing fast, unstable dynamics. In this paper, we show that an inexpensive, low-resolution time-of-flight camera can provide angle feedback for reliable and precise balancing of an inverted pendulum on a cart, a canonical control benchmark. These results open the door to using compact, inexpensive, low-resolution time-of-flight cameras for precise feedback control of fast, unstable systems.