WHED: A Wearable Hand Exoskeleton for Natural, High-Quality Demonstration Collection

Scaling dexterous robot learning is constrained by the difficulty of collecting high-quality demonstrations across diverse operators. Existing wearable interfaces often trade comfort and cross-user adaptability for kinematic fidelity, while embodiment mismatch between demonstration and deployment requires visual post-processing before policy training. We present DexEXO, a wearability-first hand exoskeleton that aligns visual appearance, contact geometry, and kinematics at the hardware level. DexEXO features a pose-tolerant thumb mechanism and a slider-based finger interface analytically modeled to support hand lengths from 140mm to 217mm, reducing operator-specific fitting and enabling scalable cross-operator data collection. A passive hand visually matches the deployed robot, allowing direct policy training from raw wrist-mounted RGB observations. User studies demonstrate improved comfort and usability compared to prior wearable systems. Using visually aligned observations alone, we train diffusion policies that achieve competitive performance while substantially simplifying the end-to-end pipeline. These results show that prioritizing wearability and hardware-level embodiment alignment reduces both human and algorithmic bottlenecks without sacrificing task performance. Project Page: https://dexexo-research.github.io/

Collecting dexterous manipulation demonstrations for each robot hand requires repeated task-specific data acquisition. We ask whether one shared corpus of natural human demonstrations can instead serve as a reusable data interface for different dexterous hands, without collecting task demonstrations on each target robot. We present Human2Dex, a wrist-centric human demonstration interface that separates shared human observation and motion semantics from embodiment-specific execution. It aligns observations through local hand-appearance adaptation and a shared 21-point hand representation with consistent structural semantics across human and robot observations. It constructs executable supervision by retargeting fused human hand motion to each target hand, and introduces the Grasp-Pocket Interaction Representation (GPIR) to express tracked objects relative to a hand-centered Functional Grasp Pocket. The corpus is converted into separate training sets for Linker O6 and Wuji, while action labels, normalization, training, and diffusion-policy checkpoints remain hand-specific. Across six real-world tasks, Human2Dex achieves 109/120 (90.8%) successes on Linker O6 and 97/120 (80.8%) on Wuji. Across both hands, Human-Raw achieves 63/240 (26.3%) successes, whereas the complete Human2Dex configuration achieves 206/240 (85.8%). These results support the use of wrist-centric human demonstrations as a reusable interface across calibrated dexterous hands while retaining embodiment-specific policy learning. The project website is publicly available at https://human2dex.pages.dev/.

Imitation learning for dexterous hands is bottlenecked by the difficulty of collecting contact-rich demonstrations that transfer faithfully to the robot. Prior wearable-exoskeleton systems record only on the human side and retarget via open-loop mappings calibrated in free space, which degrade under contact. We present SEED-UMI, a framework in which both the human and the robot wear the same exoskeleton: joint encoders become a physically shared measurement, and wrist cameras mounted to the exoskeleton observe the same outer mechanism during both human data collection and robot policy rollouts. This turns retargeting into paired cross-embodiment supervision and lets policies train directly on raw exoskeleton-centric wrist images, without segmentation or inpainting. On five contact-rich tasks, SEED-UMI achieves 3.0x greater data collection efficiency than exoskeleton-based teleoperation and a 70.0% average rollout success rate.