LIPP: Load-Aware Informative Path Planning with Physical Sampling

This paper proposes a novel method that extends the Model Predictive Path Integral (MPPI) method with motion primitives for additional structured sampling, which enhances the convergence towards a globally optimal solution. By evaluating motion primitives and perturbed control sequences in a real-time sampling-based optimization loop, this work addresses the limitations of the path planning capabilities of sampling-based controllers. The algorithm is implemented on a quadcopter simulator and tested on an obstacle field navigation task. It is demonstrated that the proposed approach enhances exploration of the control space while maintaining the fast, reactive behavior required for real-time control.

Mutual information (MI) is a principled and widely used objective for robotic information gathering (RIG), providing strong theoretical guarantees for sensor placement (SP) and informative path planning (IPP). However, its high computational cost - dominated by repeated log-determinant evaluations - has limited its use in real-time planning. This paper presents Schur-MI, a Gaussian process (GP) MI formulation that (i) leverages the iterative structure of RIG to precompute and reuse expensive intermediate quantities across planning steps, and (ii) uses a Schur-complement factorization to avoid large determinant computations. Together, these methods reduce the per-evaluation cost of MI from $\mathcal{O}(|\mathcal{V}|^3)$ to $\mathcal{O}(|\mathcal{A}|^3)$, where $\mathcal{V}$ and $\mathcal{A}$ denote the candidate and selected sensing locations, respectively. Experiments on real-world bathymetry datasets show that Schur-MI achieves up to a $12.7\times$ speedup over the standard MI formulation. Field trials with an autonomous surface vehicle (ASV) performing adaptive IPP further demonstrate the method's practicality. By making MI computation tractable for online planning, Schur-MI helps bridge the gap between information-theoretic objectives and real-time robotic exploration. Our code is available at: www.sgp-tools.com

Coverage path planning (CPP) is a fundamental problem in robot motion planning, whose aim is to produce robot trajectories that provide complete coverage of target workspaces while minimizing task-specific objectives such as path length, overlap, number of turns, and energy consumption. CPP has widespread applications in cleaning, inspection, mapping, agriculture, manufacturing, surveillance, demining, and environmental monitoring. Although classical CPP has been extensively studied, recent advances have extended CPP beyond single-robot settings to multi-robot systems, complex 3D environments, constrained platforms, learning-based coverage planning, and visual coverage tasks. This paper presents a comprehensive survey of 125 representative works published primarily between 2015 and 2026, while presenting the evolution of recent developments in light of the classical CPP methods published before 2015. The CPP methods are organized into six main categories: single-robot CPP, multi-robot CPP, 3D CPP, constrained CPP, learning-based CPP, and visual CPP. For each category, the review summarizes the main planning formulations, representative algorithms, strengths, and limitations. In addition, the review analyzes how environmental knowledge, workspace geometry, robot constraints, sensing objectives, and coordination requirements shape the CPP problem. The survey further discusses open challenges in scalable online planning, multi-robot coordination, 3D and visual coverage, unified platform-constrained and resource-aware coverage, and learning-enhanced coverage. Thus, the survey provides a structured overview of recent CPP developments and future research directions.