Autonomous Integration and Improvement of Robotic Assembly using Skill Graph Representations

Contact-rich robotic skills remain challenging for industrial robots due to tight geometric tolerances, frictional variability, and uncertain contact dynamics, particularly when using position-controlled manipulators. This paper presents a reusable and encapsulated skill-based strategy for peg-in-hole assembly, in which adaptation is achieved through Residual Reinforcement Learning (RRL). The assembly process is represented using composite skills with explicit pre-, post-, and invariant conditions, enabling modularity, reusability, and well-defined execution semantics across task variations. Safety and sample efficiency are promoted through RRL by restricting adaptation to residual refinements within each skill during contact-rich interactions, while the overall skill structure and execution flow remain invariant. The proposed approach is evaluated in MuJoCo simulation on a UR5e robot equipped with a Robotiq gripper and trained using SAC and JAX. Results demonstrate that the proposed formulation enables robust execution of assembly skills, highlighting its suitability for industrial automation.

A generalist robot should not only perform diverse tasks but also improve through experience, turning what it learns during execution into capabilities that later tasks can reuse. Robot agents that act through code can already repair programs from execution feedback, yet it remains a central challenge to organize this experience around the task structure that gives it meaning, so that each repair is attributed to the responsible capability, supported by execution evidence, and validated before it is reused. We introduce RoboRSI, a robot self-improvement system built on Top-Down Skill Refinement (TSR). TSR decomposes tasks into compound, atomic, and base skills with scoped responsibilities and explicit input--output contracts, attributes each execution outcome to the responsible branch, and confines revision to that branch. Building upon this structure, a Manager, Planner, Engineer, and Reviewer coordinate planning, execution, diagnosis, and the validated release of new skills, while people steer the process through objectives and corrections; stable skill sequences are further consolidated into reusable compound skills. On a mobile manipulator, RoboRSI develops multi-object household cleanup over 104 rounds. In simulation, it achieves the highest success rate on LIBERO, LIBERO-PRO, LIBERO-Plus, and RoboTwin, exceeding the strongest baseline by 2.7 to 11.0 percentage points.

Autonomous robotic assembly of interlocking bricks demands seamless integration of long-horizon task reasoning, spatial grounding, and fine-grained manipulation. This paper presents BrickCraft, a compositional framework designed for long-horizon and generalizable interlocking brick assembly. BrickCraft models the assembly process using a relative formulation, where each step is anchored to a reference brick within the partial structure, thereby decomposing complex tasks into a finite set of reusable primitive skills. BrickCraft bridges the gap between high-level assembly plans and physical execution through situated manuals, which provide explicit spatial guidance for learned visuomotor skills by projecting the assembly intent onto real-time robot observations. Finally, BrickCraft employs a modular execution pipeline that chains these spatially grounded skills to accomplish long-horizon assembly tasks. Extensive experimental validations demonstrate that BrickCraft acquires proficient assembly skills from a limited set of demonstrations and effectively composes them for diverse long-horizon assembly tasks. The project website is available at https://intelligent-control-lab.github.io/BrickCraft.