A Self-Rotating Tri-Rotor UAV for Field of View Expansion and Autonomous Flight

Autonomous flight in confined and cluttered environments is fundamentally limited by the restricted field of view (FoV) of onboard sensors. Passive self-rotation expands sensing coverage without additional sensors but introduces a tradeoff between swept-FoV refresh rate and flight performance. This letter presents a configuration-induced passively self-rotating tricopter for perception-enhanced autonomous flight. Firstly, the rear-arm configuration parameter is exploited to regulate the passive self-rotation operating point, providing an airframe-level mechanism for balancing swept-FoV refresh rate and flight performance. Secondly, a hierarchical autonomy framework integrating planning and control is developed to enable agile and robust autonomous flight under continuous passive self-rotation. For waypoint-based inspection, guide-point replanning is further used to improve task-level coverage. Extensive real-world experiments, including high-speed trajectory tracking, disturbance-rejection tests, and autonomous navigation in representative cluttered environments, demonstrate the effectiveness of the proposed approach for perception-enhanced autonomous flight.

Efficient UAV exploration in unknown environments requires rapid coverage expansion while maintaining accurate and reliable localization, since safe navigation in complex scenes depends on consistent mapping and pose estimation. However, for conventional LiDAR-equipped UAVs, the observable region is tightly coupled with the UAV pose and motion. Expanding coverage often requires additional translational or rotational maneuvers, which can reduce exploration efficiency and increase the risk of localization degradation in geometrically challenging environments. Motorized rotating LiDARs provide a promising solution by actively adjusting the sensor viewing direction without changing the UAV motion, thereby introducing an additional sensing degree of freedom. Nevertheless, existing exploration systems rarely exploit this scanning freedom as an explicit decision variable linked to both exploration progress and localization quality. To address this gap, we develop a UAV platform equipped with an independently actuated rotating LiDAR and propose a hierarchical exploration framework. The global planner organizes frontiers into representative viewpoints and sequences them using topology-aware transition costs. Built upon this planner, FU-MPC serves as a local receding-horizon scan controller that optimizes LiDAR rotation along the predicted flight trajectory. The controller jointly considers frontier-aware exploration utility and direction-dependent localization uncertainty, while lightweight surrogate evaluation enables real-time onboard execution. Experiments in complex environments demonstrate that the proposed system improves exploration efficiency while maintaining robust localization performance compared with fixed-pattern scanning and uncertainty-only baselines. The project page can be found at https://kafeiyin00.github.io/FU-MPC/.

UAVs play an important role in applications such as autonomous exploration, disaster response, and infrastructure inspection. However, UAV VLN in complex 3D environments remains challenging. A key difficulty is the structural representation mismatch between 2D visual perception and the 3D trajectory decision space, which limits spatial reasoning. To this end, we propose SpatialFly, a geometry-guided spatial representation framework for UAV VLN. Operating on RGB observations without explicit 3D reconstruction, SpatialFly introduces a geometry-guided 2D adaptive representation mechanism. Specifically, the geometric prior injection module injects global structural cues into 2D semantic tokens to provide scene-level geometric guidance. The geometry-aware reparameterization module then uses geometry-conditioned cross-modal attention and gated residual fusion to adaptively reparameterize the visual tokens. Experimental results show that SpatialFly consistently outperforms state-of-the-art UAV VLN baselines across both seen and unseen environments, reducing NE by 4.03m and improving SR by 1.27% over the strongest baseline on the unseen Full split. Additional trajectory-level analysis shows that SpatialFly produces trajectories with better path alignment and smoother, more stable motion.