cs.ROApr 19, 2026

MM-Hand: A 21-DOF Multi-modal Modular Dexterous Robotic Hand with Remote Actuation

Authors: Zhuoheng Li, Qingquan Lin, Checheng Yu, Qiangyu Chen, Zhiqian Lan, Lutong Zhang, Hongyang Li, Ping Luo

Organizations: The University of Hong Kong · City University of Hong Kong · XiFengGu Ltd.

Abstract

High-DOF dexterous hands require compact actuation, rich sensing, and reliable thermal behavior, but conventional designs often occupy valuable in-hand space, increase end-effector mass, and suffer from heat accumulation near the hand. Remote tendon-driven actuation offers an alternative by relocating motors to the robot base or an external motor hub, thereby freeing the fingers and palm for additional degrees of freedom, sensing modules, and maintainable mechanical structures. This paper presents MM-Hand, a 21-DOF Multimodal Modular dexterous hand based on remote tendon-driven actuation. The hand integrates spring-return tendon-driven fingers, modular 3D-printed finger and palm structures, quick tendon connectors for maintenance, and a multimodal sensing system including joint angle sensors, tactile sensors, motor-side feedback, and in-palm stereo vision. We further analyze tendon-sheath length variation and friction loss to guide the design of the routing, motor hub, and closed-loop joint control. Experiments validate the transmission, output force, sensing, and control capability of the system. The fingertip force reaches 25N under a 1m remote sheath transmission, demonstrating practical load capacity despite long-distance tendon routing. Closed-loop joint-level experiments further evaluate command tracking with a static arm and during arm motion. These results show that MM-Hand provides a lightweight, sensor-rich, and maintainable hardware platform for dexterous manipulation research. To support the community, all hardware designs and software frameworks are made fully open-source at https://mmlab.hk/research/MM-Hand.

Explore similar work

CardsList
Jul 16, 2026cs.RO

MIDAS Hand: Modular low-Impedance Direct-drive Anthropomorphic Sensing Hand

Dexterous manipulation is limited not only by algorithms but by a shortage of accessible hand hardware that combines human-scale morphology, ease of manufacturing or maintenance, tactile sensing, and practical cost. Existing dexterous hands tend to optimize some of these properties at the expense of others. We present MIDAS Hand, a low-cost, open-source, human-scale dexterous hand with integrated tactile sensing for manipulation research. MIDAS Hand provides 16 total degrees of freedom (DoF) with 13 active DoF, directly driven actuation with measurably low backdrive torque, and 283 three-axis tactile taxels in a compact 700 g package with a bill of materials under 3,000 USD. Built from 3D-printed components, it assembles in under three hours while providing the strength, repeatability, and maintainability needed for repeated real-world experiments. Alongside the hardware, we release a full stack: design files, build documentation, control and tactile Python APIs, simulation models, and retargeting and teleoperation pipelines. We characterize MIDAS Hand through workspace and grasp-taxonomy analysis, payload and reliability tests, backdrivability measurements, and teleoperation demonstrations with tactile sensing, showing that it offers a balanced, reproducible platform for tactile dexterous manipulation and human-to-robot data collection. Project page: https://midas-hand.com
Alvin Zhu, Mingzhang Zhu, Beom Jun Kim +3
Robotic HandsTactile SensingTeleoperationImpedance Control
AskPDF
May 13, 2026cs.RO

Towards Robotic Dexterous Hand Intelligence: A Survey

Robotic dexterous hands are central to contact-rich manipulation, with rapid progress driven by advances in hardware, sensing, control, simulation, and data generation. However, existing studies are often developed under different assumptions regarding hand embodiments, sensory configurations, task settings, training data, and evaluation protocols, making systematic comparison difficult and obscuring the developmental trajectory of the field. This survey provides a holistic review of dexterous hand research from four complementary aspects. First, we present a hardware-level analysis covering actuation, transmission, perception, and representative hand designs, highlighting the key trade-offs in force capability, compliance, bandwidth, integration, and system complexity. Furthermore, we review control and learning methods for dexterous manipulation from a methodological perspective, grouping representative works by major paradigms and tracing their evolution in chronological order. In addition, we consolidate datasets, modality design, and evaluation practices, which enables methodological progress to be interpreted together with the ways in which it is trained, benchmarked, and assessed. Finally, we discuss the major limitations of current dexterous hand research and summarize the corresponding future directions. By connecting hardware analysis, methodological development, data resources, and evaluation, this survey aims to provide a structured understanding of dexterous hand research and to clarify the most important open challenges for future study.
Weiguang Zhao, Tian Liang, Xihao Guo +3
Robotic HandsEmbodiedSurveyText Modality
AskPDF
Apr 16, 2026cs.RO

DEX-Mouse: A Low-cost Portable and Universal Interface with Force Feedback for Data Collection of Dexterous Robotic Hands

Data-driven dexterous hand manipulation requires large-scale, physically consistent demonstration data. Simulation and video-based methods suffer from sim-to-real gaps and retargeting problems, while MoCap glove-based teleoperation systems require per-operator calibration and lack portability, as the robot hand is typically fixed to a stationary arm. Portable alternatives improve mobility but lack cross-platform and cross-operator compatibility. We present DEX-Mouse, a portable, calibration-free hand-held teleoperation interface with integrated kinesthetic force feedback, built from commercial off-the-shelf components under USD 150. The operator-agnostic design requires no calibration or structural modification, enabling immediate deployment across diverse environments and platforms. The interface supports a configuration in which the target robot hand is mounted directly on the forearm of an operator, producing robot-aligned data. In a comparative user study across various dexterous manipulation tasks, operators using the proposed system achieved an 86.67% task completion rate under the attached configuration. Also, we found that the attached configuration reduced the perceived workload of the operators compared to spatially separated teleoperation setups across all compared interfaces. The complete hardware and software stack, including bill of materials, CAD models, and firmware, is open-sourced at https://dex-mouse.github.io/ to facilitate replication and adoption.
Joonho Koh, Haechan Jung, Nayoung Kim +2
Robotic HandsDexterous ManipulationTeleoperationRobotic Data AcquisitionData CollectionUniversal
AskPDF