Towards Robotic Dexterous Hand Intelligence: A Survey

Human manipulation skills represent a pinnacle of voluntary motor functions, requiring the coordination of many degrees of freedom and the processing of high-dimensional sensor input to achieve remarkable dexterity. Thus, this study investigates whether the human hand, with its associated biomechanical properties, sensors, and control mechanisms, is an ideal that should be strived for in robotics. Do robots need anthropomorphic hands? First, characteristics of the human hand in terms of biomechanics and perception are extracted to compare them with currently commercially available robotic hands. From this comparison, research questions are derived that connect manipulation system complexity to skill repertoire size and dexterity. These questions are addressed through a systematic literature review, analyzing the manipulation capabilities demonstrated in 125 papers published between 2019 and 2025. Although complex five-fingered hands are often considered the ultimate goal for robotic manipulators, they are not necessary for all tasks. Findings indicate that in-hand manipulation does not benefit from anthropomorphic hand design, as simpler mechanisms are sufficient; however, mechanism complexity correlates with the breadth of manipulation tasks a hand can perform. Sensor integration and intelligent manipulation strategies remain underexplored, which may be due to a misalignment with hand design: instead of replicating the number of fingers and degrees of freedom, focusing on robustness and softness would allow more intelligent control and learning to exploit environmental contacts and integrate more sensors. Finally, the article argues for standardized evaluation criteria to enable the systematic comparison of hand designs and manipulation systems.

Dexterous manipulation is limited by both control and design, without consensus as to what makes manipulators best for performing dexterous tasks. This raises a fundamental challenge: how should we design and control robot manipulators that are optimized for dexterity? We present a co-design framework that learns task-specific hand morphology and complementary dexterous control policies. The framework supports 1) an expansive morphology search space including joint, finger, and palm generation, 2) scalable evaluation across the wide design space via morphology-conditioned cross-embodied control, and 3) real-world fabrication with accessible components. We evaluate the approach across multiple dexterous tasks, including in-hand rotation with simulation and real deployment. Our framework enables an end-to-end pipeline that can design, train, fabricate, and deploy a new robotic hand in under 24 hours. The full framework and generated robot hands are open-sourced and available on our website.

Data-driven dexterous hand manipulation requires large-scale, physically consistent demonstration data. Simulation and video-based methods suffer from sim-to-real gaps and retargeting problems, while MoCap glove-based teleoperation systems require per-operator calibration and lack portability, as the robot hand is typically fixed to a stationary arm. Portable alternatives improve mobility but lack cross-platform and cross-operator compatibility. We present DEX-Mouse, a portable, calibration-free hand-held teleoperation interface with integrated kinesthetic force feedback, built from commercial off-the-shelf components under USD 150. The operator-agnostic design requires no calibration or structural modification, enabling immediate deployment across diverse environments and platforms. The interface supports a configuration in which the target robot hand is mounted directly on the forearm of an operator, producing robot-aligned data. In a comparative user study across various dexterous manipulation tasks, operators using the proposed system achieved an 86.67% task completion rate under the attached configuration. Also, we found that the attached configuration reduced the perceived workload of the operators compared to spatially separated teleoperation setups across all compared interfaces. The complete hardware and software stack, including bill of materials, CAD models, and firmware, is open-sourced at https://dex-mouse.github.io/ to facilitate replication and adoption.