Dynamic UGV-UAV Cooperative Path Planning in Uncertain Environments

We study cooperative shortest path planning for an unmanned ground vehicle (UGV) assisted by an unmanned aerial vehicle (UAV) scout in environments with unknown road blockages that are only discovered when a robot reaches the damaged point. This formulation generalizes the original Canadian Traveller Problem (CTP), which assumes a single ground vehicle and that the traversability status of all incident edges is revealed upon arrival at a vertex. We first analyze the case where the start and the goal are connected by $k$ disjoint paths, and prove that the worst-case competitive ratio $ρ$ for a single UGV is $2k-1$. With UAV assistance, and under the simplifying assumption of negligible initial transit and deadheading UAV costs, the ratio $ρ$ improves to $2(k-1)\frac{v_G}{v_G + v_A} + 1$, where $v_G$ and $v_A$ denote the UGV and UAV speed, respectively. To address general graphs and non-negligible UAV initial transit and deadheading costs, we present an optimal candidate-path partitioning algorithm that assigns path prefix inspection to the UGV and path suffix inspection to the UAV, and prove the optimality of the UAV inspection strategy on general graphs. We evaluate our algorithm by performing experiments on road networks from the world's 50 most populous cities with randomized blockage locations, and show that the algorithm reduces UGV travel time, with larger improvements as the UAV speed increases.

Limited flight endurance significantly restricts the operational range of unmanned aerial vehicles (UAVs) in long duration missions such as surveillance and inspection, where multiple spatially distributed Areas of Interest (AOIs) must be visited. These tasks require efficient routing determining the sequence of visits which directly impacts mission time, energy consumption, and overall feasibility. Pairing UAVs with unmanned ground vehicles (UGVs) for mobile recharging offers a promising solution, but introduces a tightly coupled cooperative routing problem involving UAV route planning, UGV road constrained movement, energy management, and rendezvous scheduling under uncertainty. In this work, we present an integrated planning and autonomy framework for reliable field deployment. We formulate the problem as an energy constrained cooperative routing task and solve it using a Deep Reinforcement Learning (DRL) based planner that jointly optimizes the UAV visitation sequence and rendezvous locations with the UGV, outperforming baseline heuristics in minimizing total mission time. To bridge the gap between planning and execution, we introduce a standardized two layer YAML based mission API that captures environment states and structures lightweight, synchronized action sequences. This framework is supported by a complete autonomy stack using PX4/MAVSDK for UAV control and ROS 2/Nav2 for UGV navigation. Furthermore, we propose a lightweight Rendezvous Aware Replanner (RARP) that operates online to handle environmental uncertainties, reducing energy margin violations from 83.33% to 20.00%. The full system is validated through outdoor field experiments, demonstrating robust cooperative navigation and adaptability in dynamic tasks, including a search and rescue scenario with vision language model (VLM) based hazard detection

This paper presents a collaborative UAV-UGV navigation framework for high-altitude, snow-covered terrain, where reduced visibility and unstable ground render conventional methods ineffective. We introduce a custom efficient U-Net architecture that falls under the computational constraints for real-time road segmentation, utilizing a novel synthetic snow data augmentation technique to achieve 96.5% segmentation accuracy. For UAV localization, we implement an Extended Kalman Filter (EKF) fusing onboard GPS and IMU data, achieving a maximum observed positional error of +-0.5 meters. The UGV position is determined via a visual tracking pipeline using YOLOv5 and depth data from the UAV's RGB-D camera. A dynamic path planning algorithm utilizes this segmentation to adjust for snow drifts, enabling successful navigation in obscured test environment with minimal deviation.