Drone-Assisted UAV-UGV Collaboration for Autonomous Navigation in Snow-Covered Terrain
Authors: Shreyam Gupta, P. Agrawal, Priyam Gupta, R. Gautam
Organizations: Robotics Research Group, Indian Institute of Technology · University of Colorado, Boulder, USA · Intelligent Field Robotic Systems
Abstract
This paper presents a collaborative UAV-UGV navigation framework for high-altitude, snow-covered terrain, where reduced visibility and unstable ground render conventional methods ineffective. We introduce a custom efficient U-Net architecture that falls under the computational constraints for real-time road segmentation, utilizing a novel synthetic snow data augmentation technique to achieve 96.5% segmentation accuracy. For UAV localization, we implement an Extended Kalman Filter (EKF) fusing onboard GPS and IMU data, achieving a maximum observed positional error of +-0.5 meters. The UGV position is determined via a visual tracking pipeline using YOLOv5 and depth data from the UAV's RGB-D camera. A dynamic path planning algorithm utilizes this segmentation to adjust for snow drifts, enabling successful navigation in obscured test environment with minimal deviation.
Limited flight endurance significantly restricts the operational range of unmanned aerial vehicles (UAVs) in long duration missions such as surveillance and inspection, where multiple spatially distributed Areas of Interest (AOIs) must be visited. These tasks require efficient routing determining the sequence of visits which directly impacts mission time, energy consumption, and overall feasibility. Pairing UAVs with unmanned ground vehicles (UGVs) for mobile recharging offers a promising solution, but introduces a tightly coupled cooperative routing problem involving UAV route planning, UGV road constrained movement, energy management, and rendezvous scheduling under uncertainty. In this work, we present an integrated planning and autonomy framework for reliable field deployment. We formulate the problem as an energy constrained cooperative routing task and solve it using a Deep Reinforcement Learning (DRL) based planner that jointly optimizes the UAV visitation sequence and rendezvous locations with the UGV, outperforming baseline heuristics in minimizing total mission time. To bridge the gap between planning and execution, we introduce a standardized two layer YAML based mission API that captures environment states and structures lightweight, synchronized action sequences. This framework is supported by a complete autonomy stack using PX4/MAVSDK for UAV control and ROS 2/Nav2 for UGV navigation. Furthermore, we propose a lightweight Rendezvous Aware Replanner (RARP) that operates online to handle environmental uncertainties, reducing energy margin violations from 83.33% to 20.00%. The full system is validated through outdoor field experiments, demonstrating robust cooperative navigation and adaptability in dynamic tasks, including a search and rescue scenario with vision language model (VLM) based hazard detection
Accurate localization of unmanned aerial vehicles (UAVs) is essential for applications such as structural health monitoring, especially in environments where Global Positioning System (GPS) signals are denied or unreliable, like indoor spaces, tunnels, urban canyons, or areas beneath large structures. To address this challenge, we propose Cross-Fusion, a novel method for real-time UAV localization that integrates data from a 3D Light Detection and Ranging (LiDAR) and a monocular camera. A key contribution is its cross-session fusion strategy, which integrates visual and geometric information collected from multiple agents during routine baseline surveys to improve localization consistency and map completeness. The system employs LiDAR-based odometry for motion tracking and image-based feature matching via a single red-green-blue (RGB) camera to correct drift and improve accuracy. Unlike visual-inertial systems, Cross-Fusion maintains a simple sensor setup and avoids the complexity of stereo or global shutter configurations. Experimental results demonstrate that Cross-Fusion achieves localization accuracy comparable to GPS-based methods and performs reliably in challenging feature-sparse environments.
This paper addresses the Dynamic UGV-UAV Cooperative Path Planning (DUCPP) problem involving one unmanned ground vehicle (UGV) assisted by one or more unmanned aerial vehicles (UAVs) operating on an uncertain road network with potentially impassable edges. DUCPP is particularly relevant for scenarios such as disaster response, emergency supply transport, and rescue operations, where a UGV must reach a specified destination in the presence of partially unknown road conditions. To enable the UGV to travel safely and efficiently to its destination, the UAV(s) dynamically inspect edges in the environment to identify and prune damaged or impassable edges from consideration. We present multiple strategies, including a bidirectional approach, to optimize UGV-UAV cooperation for finding a safe path in an uncertain road network. Furthermore, we explore the impact of using multiple UAVs on reducing the UGV's travel time, and evaluate the associated computation time. The proposed strategies are implemented and evaluated on 100 urban road networks. The results demonstrate that the bidirectional strategy achieves the best performance in most instances, and using multiple UAVs further reduces UGV travel time at the expense of increased computation time. This paper presents a robust framework for DUCPP to achieve efficient UGV-UAV cooperation for path planning and inspection, offering practical solutions for navigation in challenging and uncertain conditions.