Robust state estimation for highly dynamic motion of legged robots remains challenging, especially in dynamic, contact-rich scenarios. Traditional approaches often rely on binary contact states that fail to capture the nuances of partial contact or directional slippage. This paper presents CoCo-InEKF, a differentiable invariant extended Kalman filter that utilizes continuous contact velocity covariances instead of binary contact states. These learned covariances allow the method to dynamically modulate contact confidence, accounting for more nuanced conditions ranging from firm contact to directional slippage or no contact. To predict these covariances for a set of predefined contact candidate points, we employ a lightweight neural network trained end-to-end using a state-error loss. This approach eliminates the need for heuristic ground-truth contact labels. In addition, we propose an automated contact candidate selection procedure and demonstrate that our method is insensitive to their exact placement. Experiments on a bipedal robot demonstrate a superior accuracy-efficiency tradeoff for linear velocity estimation, as well as improved filter consistency compared to baseline methods. This enables the robust execution of challenging motions, including dancing and complex ground interactions -- both in simulation and in the real world.
Kalman filter-based algorithms are fundamental for mobile robots, as they provide a computationally efficient solution to the challenging problem of state estimation. However, they rely on two main assumptions that are difficult to satisfy in practice: (a) the system dynamics must be linear with Gaussian process noise, and (b) the measurement model must also be linear with Gaussian measurement noise. Previous works have extended assumption (a) to nonlinear spaces through the Invariant Extended Kalman Filter (IEKF), showing that it retains properties similar to those of the classical Kalman filter when the system dynamics are group-affine on a Lie group. More recently, the counterpart of assumption (b) for the same nonlinear setting was addressed in [1]. By means of the proposed Iterated Invariant Extended Kalman Filter (IterIEKF), the authors of that work demonstrated that the update step exhibits several compatibility properties of the classical linear Kalman filter. In this work, we introduce a novel open-source state estimation algorithm for legged robots based on the IterIEKF. The update step of the proposed filter relies solely on proprioceptive measurements, exploiting kinematic constraints on foot velocity during contact and base-frame velocity, making it inherently robust to environmental conditions. Through extensive numerical simulations and evaluation on real-world datasets, we demonstrate that the IterIEKF outperforms the vanilla IEKF, the SO(3)-based Kalman Filter, and its iterated variant in terms of both accuracy and consistency.
Hilton Marques Souza Santana, João Carlos Virgolino Soares, Sven Goffin +4
One of the significant challenges in legged robotics is achieving accurate odometry using only onboard proprioceptive sensors. In this study, we present a complete leg odometry pipeline based on an Error-State EKF (ESEKF) that relies exclusively on proprioceptive data: a body fixed IMU, joint encoders, and force sensors, where filter's state is corrected by feet determined to be in a stationary stance. The core of our contribution is fused contact detection and an uncertainty quantification module designed to explicitly identify and reject slippage. This module runs two detectors in parallel for each foot, 1) a debounced, force-based Gaussian Mixture Model (GMM) guided Finite State Machine (FSM) to confirm physical contact, and 2) a kinematic-based Generalized Likelihood Ratio Test (GLRT) on the estimated velocity of the foot. The continuous quality scores from both estimators are fused to detect if the foot is both physically loaded and kinematically stationary and served as an uncertainty signal for each contact. To validate our approach, we collected a multi-modal dataset of 29 sequences spanning diverse indoor and outdoor terrains (e.g., concrete, grass, pebble, and rock) total of 2.4 km long. We benchmarked our approach against both proprioceptive and exteroceptive methods. The results demonstrate our method's efficacy in providing accurate odometry estimates, robustly handling slippage-prone environments. We also share our code and real-time ROS2 package as open-source.
This paper presents an invariant extended Kalman filtering (InEKF) approach for real-time state estimation of humanoid robots operating on non-inertial ground using only onboard proprioceptive sensing. The proposed approach estimates the robot's base position and velocity relative to the moving ground frame without requiring direct measurements of ground motion or externally mounted sensors. By exploiting kinematic constraints at the stance foot through foot-mounted IMUs, the filter accounts for ground-induced nonlinearities in the process and measurement models while remaining fully proprioceptive. The estimator is formulated to admit a right-invariant measurement model, enabling favorable error dynamics under large initial uncertainties. Observability analysis establishes conditions under which the robot's relative base position and velocity are observable with respect to the non-inertial ground frame. Experiments with the Digit humanoid robot standing and squatting atop a swaying and pitching ground showcase a 96% speedup in convergence rate and an 80% reduction in position estimate errors over existing InEKFs. Walking experiments on a uni-axially rotating ground achieve an average estimation error of less than 9 cm for an initial error of up to 1 m.