MR-SLAM: Immersive Spatial Supervision for Multi-Robot Mapping via Mixed Reality

Multi-operator control of robot teams requires not only access to the same mission information, but also mechanisms for maintaining shared awareness and preventing conflicting interventions. Building on our previous HORUS interface (Holistic Operational Reality for Unified Systems) we present a mixed-reality interface that extends single-operator multi-robot supervision to collaborative multi-operator use. The system supports two complementary modes: a co-located shared workspace, in which operators observe and manipulate the same mini-map in the same physical location, and a private-workspace mode, in which operators work on the same mission through independently placed local workspaces. The architecture combines registration-driven scene construction, lightweight shared-session synchronization, and per-robot control leases to support collaborative monitoring, tasking, and teleoperation while preventing conflicting commands. We evaluated the approach in a human-subject study with 36 participants (18 pairs) controlling three Nova Carter mobile robots in two search environments. The performance of the objective task was comparable across the two modes, indicating that both modes supported effective mission execution. However, the co-located shared workspace significantly improved perceived collaboration, shared understanding, and handoff clarity, and was the preferred collaborative mode. These results indicate that physically co-locating the MR workspace improves how operators coordinate even when the underlying robot-control tools remain unchanged.

Multi-robot simultaneous localization and mapping (SLAM) is a fundamental task in multi-robot operations. Robots must have a common understanding of their location and that of their team members to complete coordinated actions. However, multi-robot SLAM between Uncrewed Surface Vessels (USVs) and Autonomous Underwater Vehicles (AUVs) has primarily been achieved through acoustic pinging between robots to retrieve range measurements; a measurement technique requires that robots to be in similar locations simultaneously, have an uninterrupted path for signal propagation, and may necessitate synchronized clocks. This is especially challenging in complex, cluttered maritime environments, where structures may impede signals. However, these same structures may be observable above and below the water's surface, presenting an opportunity for inter-robot SLAM loop closure between USV and AUV data streams. This work builds upon recent research on inter-robot SLAM loop closure between USV and AUV data, extending it to propose a centralized multi-robot SLAM system. Each robot performs its state estimation, and we detect loop closures between each AUV and the USV data. These inter-robot loop closures are used to merge each robot's state estimate into a centralized graph, yielding estimates for the whole time history of the USV and all AUVs in the system. Validation is performed using real-world perceptual data in three different environments. Results show improved errors for AUVs in the multi-robot SLAM system compared to single-robot SLAM over the same trajectories. To our knowledge, this is the first instance of a multi-robot SLAM system with AUVs and USVs built on loop closures rather than acoustic distance measurements.

Outdoor robot teams need a shared dense map despite limited overlap, independent reference frames, and uncertain monocular scale. Collaborative dense SLAM systems typically resolve this with depth sensors, which add payload, power, and calibration cost. We present CoMo3R-SLAM, a collaborative monocular dense SLAM system that places learned feed-forward 3D reconstruction priors at the center of the multi-agent problem: their dense pointmaps anchor scale across agents and supply correspondences strong enough to verify inter-agent links geometrically. Each agent tracks and fuses its own keyframes from a single RGB stream, while a coordinator retrieves cross-agent keyframes over the prior's encoder features, verifies them by bidirectional dense pointmap matching, synchronizes the independent similarity gauges in closed form, and refines every keyframe in one unified multi-agent sim(3) graph. Finally, a pose-depth alternation over geometry-aware segments lets inter-agent observations constrain dense structure as well as trajectories. Requiring neither measured depth nor supplied intrinsics, CoMo3R-SLAM attains the lowest trajectory error on three of four Tanks and Temples scenes, and competitive accuracy on Waymo driving sequences, while running at approximately 6-8 FPS on RTX 3080 Ti. A long-horizon traversal, independently captured day and night streams, and teams of up to four agents further map its operating range.