LiDARs are widely used for 3D depth reconstruction, but their performance is often limited by inherent hardware constraints that impose trade-offs between range, spatial resolution, and frame rate. Many LiDAR systems typically operate at low frame rates (e.g., 5-10 Hz), prioritizing long-range sensing over responsiveness to rapid scene changes. We present NeuroLiDAR, an adaptive depth sensing framework that achieves effective frame rates of up to ≈66 Hz by fusing temporally sparse LiDAR data with temporally dense inputs from neuromorphic event cameras. NeuroLiDAR integrates two components: event-based keyframe detection and event-guided depth extrapolation, to dynamically adjust the sensing rate in response to scene dynamics. To evaluate our approach, we introduce ELiDAR, a dataset spanning outdoor and indoor scenarios, and show that NeuroLiDAR reduces depth reconstruction error by ≈29% in RMSE while achieving adaptive frame rates between 27.8-47.3 Hz. Our code and dataset are available at https://github.com/darshanakgr/neurolidar.
Conventional frame-based imaging for active stereo systems has encountered major challenges in fast-motion scenarios. However, how to design a novel paradigm for ultrafast depth sensing remains an open issue. In this paper, we propose a novel problem setting, namely active event-based stereo vision, which attempts to integrate binocular event cameras and an infrared 2D pattern projector for high-speed dense depth sensing. Technically, we first build a stereo camera prototype system and present a real-world dataset with over 21.5k spatiotemporal synchronized labels at 15 Hz, while also establishing a realistic synthetic dataset with stereo event streams and 23.8k synchronized labels at 20 Hz. Then, we propose ActiveEventNet+, a lightweight yet effective event-based stereo matching neural network that learns to generate high-quality dense disparity maps from stereo event streams with low latency. Our ActiveEventNet+ mainly involves three innovations: incorporating lightweight blocks into event-based stereo matching frameworks, designing a novel cost volume with dynamic interactions between stereo pairs, and presenting an effective temporal consistency architecture to fully use rich temporal cues in event streams. The results show that our ActiveEventNet+ outperforms state-of-the-art methods while significantly reducing computational complexity. Our solution offers superior depth sensing performance compared to conventional frame-based stereo cameras in high-speed scenes. In particular, the lightweight ActiveEventNet enables the prototype system to achieve real-time processing at speeds up to 150 FPS. We believe that this novel active event-based stereo vision paradigm can provide new insights into the design of future high-speed depth sensing camera systems. Our dataset and code can be available at https://github.com/jianing-li/active_event_based_stereo.
Depth completion from sparse LiDAR measurements and corresponding RGB images is a prerequisite for accurate 3D perception in robotic systems. Existing methods achieve high accuracy on standard benchmarks but rely on heavy backbone architectures that preclude real-time deployment on embedded hardware. We present EfficientPENet, a two-branch depth completion network that replaces the conventional ResNet encoder with a modernized ConvNeXt backbone, introduces sparsity-invariant convolutions for the depth stream, and refines predictions through a Convolutional Spatial Propagation Network (CSPN). The RGB branch leverages ImageNet-pretrained ConvNeXt blocks with Layer Normalization, 7x7 depthwise convolutions, and stochastic depth regularization. Features from both branches are merged via late fusion and decoded through a multi-scale deep supervision strategy. We further introduce a position-aware test-time augmentation scheme that corrects coordinate tensors during horizontal flipping, yielding consistent error reduction at inference. On the KITTI depth completion benchmark, EfficientPENet achieves an RMSE of 631.94 mm with 36.24M parameters and a latency of 20.51 ms, operating at 48.76 FPS. This represents a 3.7 times reduction in parameters and a 23 times speedup relative to BP-Net, while maintaining competitive accuracy. These results establish EfficientPENet as a practical solution for real-time depth completion on resource-constrained edge platforms such as the NVIDIA Jetson.
Johny J. Lopez, Md Meftahul Ferdaus, Mahdi Abdelguerfi +4
Making tradeoffs between execution latency and result utility (i.e., anytime computing) for adapting to dynamic operational requirements has been shown to enhance the performance of cyber-physical systems. In this work, we focus on enabling anytime computing for deep neural networks (DNNs) that process LiDAR point clouds for 3D object detection. We propose a novel method that enables multi-resolution inference for models that process point clouds as pillars or voxels, allowing the input to be dynamically scaled and processed at the resolution needed to meet timing requirements. Importantly, our memory-efficient approach requires the deployment of only a single DNN model, avoiding the need to deploy multiple models, each trained for a different input resolution. We also introduce a deadline-aware scheduler that selects the highest possible resolution for any given input by accurately predicting the execution time for all possible resolutions at runtime, which is challenging due to the irregularity of LiDAR point clouds. Experimental results on the nuScenes autonomous driving dataset demonstrate that our method significantly outperforms existing anytime computing approaches for LiDAR object detection. Finally, we deploy our approach in a simulated autonomous driving system, where it consistently enables collision-free navigation while avoiding unnecessary stalls caused by environmental complexity.