Fast and reliable initialization is critical for monocular visual-inertial navigation systems (VINS), as it establishes the starting conditions for subsequent state estimation. Despite steady progress, most existing methods heavily rely on visual feature correspondences and require 3-4 seconds of sensory data for successful initialization, which limits their applicability and efficiency. With the advent of feed-forward 3D models that can directly predict point clouds from images, we revisit the visual-inertial initialization problem from a concise perspective. In this work, we propose a feature-free initialization framework that leverages up-to-scale point clouds predicted by a feed-forward 3D model, thereby obviating the need for visual feature tracking and estimation. This design substantially reduces system complexity and improves the reliability of initialization. Experiments on public datasets demonstrate that the proposed feature-free initialization method achieves the highest success rate, exceeding 90%, and significantly reduces the data duration required for successful initialization, typically to under 1.2 s. We further validate our method on a self-collected dataset covering various indoor and outdoor scenarios, demonstrating robust performance, particularly in visually degraded environments where existing methods often fail. The code and dataset are available at https://github.com/Yuantai-Z/FF-VIO-Init.
A simultaneous localization and mapping (SLAM) method using a monocular camera and a low-cost inertial measurement unit (IMU) sensor is an effective way to fulfill a low-cost sensor configuration. Using this sensor configuration, visual-inertial system (VINS) focuses on fusing data from a camera and an IMU sensor to estimate the six degrees-of-freedom (DOF) of the sensor pose. Typically, VINS uses only a single camera as visual input, which lead to problems such as error accumulation due to occlusion, various illumination, and textureless environments. In this paper, we propose a new multiple fisheye camera-based visual-inertial system called MFVINS. We present an IMU-aided FAST feature tracker for multiple cameras that enables efficient extraction and robust matching of local features. Then, the proposed method filters out outliers caused by fisheye distortion on the normalized image plane. Subsequently, a new reprojection error with physical validity constraints is proposed for bundle adjustment using learning-based depth estimation. The proposed method is applied to various scenarios, and its effectiveness is demonstrated by comparing previous VINS methods. In particular, MFVINS is implemented in real-time process to leverage the advantages of using multiple cameras -- robustness against occlusion and textureless regions -- while reducing the computational burden.
This paper presents an analysis of the observability and consistency properties of filtering-based visual-inertial navigation systems (VINS) that utilize anchored feature representations. The unobservable subspace of VINS with anchored landmark parameterizations is shown to be independent of the estimated landmark state, which leads to improved estimator consistency properties without any additional modifications. However, the unobservable subspace is still found to depend on the estimated navigation state, necessitating additional consistency-enforcing techniques. Two methods to improve the consistency of VINS with anchored feature representations are presented. Simulation results showcase that all estimators employing anchored feature paramterizations exhibit improved consistency properties compared to algorithms that estimate features resolved in a global reference frame, especially in scenarios where feature initialization may be poor. Real-world experiments on the TUM-VI dataset showcase that the use of anchored feature representations alone can yield comparable performance to consistency-improved estimators employing a global feature representation, demonstrating the benefit of using anchored feature parameterizations for VINS.
Mitchell Cohen, Vassili Korotkine, James Richard Forbes
A camera and an IMU are the minimal sensor setup for metric localization and dense mapping, yet classical visual--inertial filters must wait for parallax before they start and then retain only sparse landmarks. Feed-forward geometry models, in contrast, predict dense structure from a few images but provide neither metric scale nor gravity. We present DAVIO, which uses a single multi-view depth model, Depth Anything~3, for both start-up and mapping. At start-up, a five-image window and preintegrated IMU measurements form a feature-free linear system. Its robust, conditioning-checked solution bootstraps a VIO filter through buffered replay. During tracking, the filter's metric poses condition the depth model. Residual scale is corrected only along viewing rays, which preserves the metric camera baselines, and a gravity-preserving submap graph with drift-gated revisits refines the map. On EuRoC, DAVIO starts markedly earlier, reduces the localization error, and maps more accurately than SOTA feed-forward mappers given identical poses. On building-scale ORI sequences, DAVIO is on bar or better than SOTA mappers on the same odometry, and degrades far less when GT poses are replaced by real odometry. We release the code of DAVIO, a real-time dense metric SLAM system, to the community.
Jaafar Mahmoud, Arthur Movsesyan, Mikhail Iumanov +1