Flexible robotic manipulators (FRMs) offer advantages in lightweight design and large workspace, but their structural flexibility induces vibrations, accelerates fatigue, degrades tracking performance, and limits operational speed. These challenges are further amplified in multi-link serial manipulators, where increased overall length leads to greater structural flexibility. This article presents a backstepping output-feedback framework for fast vibration suppression and tip tracking of an n-degree-of-freedom serial flexible manipulator robot (nDSFMR), with a DeepONet-based approximation for practical deployment. Each link-joint is modeled as a Timoshenko beam coupled with an ODE and transformed into a canonical hyperbolic PDE with boundary dynamics. A backstepping-based boundary controller at the joint is developed to equivalently inject distributed damping along the beam, enabling rapid vibration suppression and trajectory tracking, only using available boundary measurements. To enable real-time implementation and scalability, a DeepONet neural operator is introduced to approximate the backstepping kernels, significantly reducing computational cost and facilitating fast controller updates under varying operating conditions. Experiments on a two-link flexible manipulator demonstrate faster vibration suppression and convergence of the end-effector to the desired trajectory, compared with a linear quadratic regulator (LQR) with feedforward control.
This paper presents a subsystem-based adaptive control framework for serial flexible manipulators with an arbitrary number of links, in which the elastic deformation PDE of each link is carried through the entire control design without spatial discretization or modal truncation. All dynamic quantities -- rigid-body motion, elastic deformation, and inter-link constraint forces -- are expressed uniformly as body-fixed twists and wrenches within the se3 Lie-algebraic structure. A controllable form of the per-link dynamics is derived by substituting the strain-based deformation PDE into the dynamic equation, eliminating distributed elastic acceleration and yielding a model governed by the body-fixed twist acceleration and deformation field. Desired subsystem twist trajectories are generated via a deflection-compensating inverse kinematics procedure. A nominal per-link controller is proven to produce exponential twist error decay via a per-subsystem Lyapunov function. An adaptive modification replaces exact physical parameters with online estimates governed by a projection-based law, augmenting with a parameter estimation error term. Upon summing over all links, the interaction power terms telescope to zero by Newton's third law and the frame invariance of the natural power pairing on se3se(3), establishing exponential convergence of all twist errors and bounded elastic deformation under both nominal and adaptive controllers. The screw-theoretic structure renders interaction term cancellation exact, making the stability certificate modular and scalable to chains of arbitrary length. The framework is validated numerically on a two-link flexible manipulator in three-dimensional motion.
This study develops a prescribed-time performance-shaping control method for curvature tracking of a single-segment flexible arm actuated by three antagonistic tendon pairs. A Cartesian curvature representation is introduced to avoid the undefined bending direction at the straight configuration and to establish an explicit six-tendon kinematic mapping. A cubic performance boundary contracts smoothly from an initially admissible error bound to a nonzero terminal accuracy bound within a prescribed time. Based on this boundary, a dual transformation combining static symmetric error scaling and time-varying behavior shaping maps the tracking error into a fixed unit box. The resulting controller guarantees boundary invariance, prescribed-time entry into the terminal accuracy region, and subsequent asymptotic convergence. Numerical evaluations with Python and OpenCR--MuJoCo, together with a supervised reduced-order experiment on a two-section, four-channel platform, provide complementary validation. Across six experimental trials, no violation of the prescribed boundary is observed, and the proposed controller reduces the mean terminal curvature RMSE by 32.5% relative to a matched baseline, with comparable terminal-band entry times. These results support the feasibility of the proposed approach in the reduced-order experimental setting.
This paper investigates the control problem of dual-arm unmanned aerial manipulator systems (DAUAMs). Strong coupling between the dual-arm and the multirotor platform, together with unmodeled dynamics and external disturbances, poses significant challenges to stable and accurate operation. An adaptive event-triggered control scheme with neural network-based approximation is proposed to address these issues while explicitly considering communication constraints. First, a dynamic model of the DAUAM system is derived, and a command-filter-based backstepping framework with error compensation is constructed. Then, a neural network is employed to approximate external frictions, and an event-triggered mechanism is designed to reduce the transmission frequency of control updates, thereby alleviating communication and energy burdens. Lyapunov-based analysis shows that all closed-loop signals remain bounded and that the tracking error converges to a neighborhood of the desired trajectory within a fixed time. Finally, experiments on a self-built DAUAM platform demonstrate that the proposed approach achieves accurate trajectory tracking.