Terminal Constraint Model Predictive Control for Image-Based Visual Servoing of UAVs with Kalman Filter-Based Moment Loss Compensation

This study introduces a unified control framework for fixed-wing unmanned aerial vehicles (UAVs) fitted with a pan-tilt (PT) camera, intended to perform an end-to-end mission spanning from initial target detection to accurate terminal engagement. The proposed system employs a three-phase strategy: a vision-based target acquisition phase, an NMPC-based tracking phase, and a terminal guidance phase. During tracking, the framework uses an Unscented Kalman Filter (UKF) to fuse YOLO-based visual detections with inertial measurements, enabling robust target state estimation under unknown dynamics. To ensure reliable visual contact, we introduce a constraint-aware Nonlinear Model Predictive Control (NMPC) strategy that incorporates Control Barrier Functions (CBFs) to explicitly prevent UAV self-occlusion -- a common limitation in fixed-wing tracking. Upon satisfying terminal engagement conditions, the system seamlessly transitions control to a quaternion-based Biased Proportional Navigation Guidance (BPNG) law, enforcing precise impact angle constraints. High-fidelity simulations demonstrate that the framework achieves stable, robust tracking and accurate terminal interception while strictly respecting the vehicle's dynamic limits and camera field-of-view constraints.

Reliable pipeline inspection is critical to safe energy transportation, but is constrained by long distances, complex terrain, and risks to human inspectors. Unmanned aerial vehicles provide a flexible sensing platform, yet reliable autonomous inspection remains challenging. This paper presents an autonomous quadrotor near-proximity pipeline inspection framework for three-dimensional scenarios based on image-based visual servoing model predictive control (VMPC). A unified predictive model couples quadrotor dynamics with image feature kinematics, enabling direct image-space prediction within the control loop. To address low-rate visual updates, measurement noise, and environmental uncertainties, an extended-state Kalman filtering scheme with image feature prediction (ESKF-PRE) is developed, and the estimated lumped disturbances are incorporated into the VMPC prediction model, yielding the ESKF-PRE-VMPC framework. A terrain-adaptive velocity design is introduced to maintain the desired cruising speed while generating vertical velocity references over unknown terrain slopes without prior terrain information. The framework is validated in high-fidelity Gazebo simulations and real-world experiments. In real-world tests, the proposed method reduces RMSE by 52.63% and 75.04% in pipeline orientation and lateral deviation in the image, respectively, for straight-pipeline inspection without wind, and successfully completes both wind-disturbance and bend-pipeline tasks where baseline method fails. An open-source nano quadrotor is modified for indoor experimentation.

This paper introduces an estimation and control framework for dynamic landing of multi-rotor uncrewed aerial vehicles on moving platforms. The proposed method integrates nonlinear model predictive control with a real-time minimum-jerk trajectory planner that enforces a prescribed touchdown time, enabling consistent timing during the terminal descent. To enhance robustness in the presence of time-varying sensing quality, we utilize an adaptive unscented kalman filter that updates the process and measurement noise statistics online. In addition, we provide a reference feasibility analysis showing that minimum-jerk references induce bounded thrust and torque commands under standard tracking hypotheses. The proposed framework is evaluated in simulation and hardware experiments, and it is shown to achieve repeatable landings and improved platform velocity prediction accuracy relative to EKF/UKF-based methods.