ARISTO Hand: Sensing-Driven Distal Hyperextension for Fine-Grained Manipulation

Human hand grasp adaptation depends mainly on the synergy between physical structure and biological feedback. Inspired by this biomechanical principle, the Safe Thumb-Index Robotic (STIR) Hand was developed as a minimal, lightweight, and low-cost two-digit prototype featuring an asymmetric thumb-index configuration. By pairing an underactuated, tendon-driven mechanical design with flexible strain gauges embedded into silicone-encapsulated soft joints, the system achieves passive grasp adaptation while establishing both internal proprioception and external perception. Unsupervised analysis was carried out on a dataset of the STIR hand grasping 20 different objects, along with an object classification task and an ablation study to highlight the contribution of the soft joint sensors. The object classification task discriminated object size, shape, and material stiffness with a high classification accuracy. In contrast to traditional industrial grippers and robotic hands, the STIR Hand demonstrates that sensorized compliant joints significantly improve overall sensitivity and ensure safe grasping, while remaining independent of additional fingertip tactile elements or external vision systems. Finally, a comparison to similar devices grasping identical objects validates the utility of the STIR Hand.

High-DOF dexterous hands require compact actuation, rich sensing, and reliable thermal behavior, but conventional designs often occupy valuable in-hand space, increase end-effector mass, and suffer from heat accumulation near the hand. Remote tendon-driven actuation offers an alternative by relocating motors to the robot base or an external motor hub, thereby freeing the fingers and palm for additional degrees of freedom, sensing modules, and maintainable mechanical structures. This paper presents MM-Hand, a 21-DOF Multimodal Modular dexterous hand based on remote tendon-driven actuation. The hand integrates spring-return tendon-driven fingers, modular 3D-printed finger and palm structures, quick tendon connectors for maintenance, and a multimodal sensing system including joint angle sensors, tactile sensors, motor-side feedback, and in-palm stereo vision. We further analyze tendon-sheath length variation and friction loss to guide the design of the routing, motor hub, and closed-loop joint control. Experiments validate the transmission, output force, sensing, and control capability of the system. The fingertip force reaches 25N under a 1m remote sheath transmission, demonstrating practical load capacity despite long-distance tendon routing. Closed-loop joint-level experiments further evaluate command tracking with a static arm and during arm motion. These results show that MM-Hand provides a lightweight, sensor-rich, and maintainable hardware platform for dexterous manipulation research. To support the community, all hardware designs and software frameworks are made fully open-source at https://mmlab.hk/research/MM-Hand.

Dexterous manipulation is fundamentally a problem of interaction dynamics: the hand must track precise finger trajectories, regulate the contact force exchanged with grasped objects, respect actuation and safety limits, and remain predictable when contact persists -- objectives in tension for any fixed-gain controller. A sustained contact torque $τ_{\text{ext}}$ through a joint stiffness $K_d$ produces the structural bias $e_\infty=τ_{\text{ext}}/K_d$, so stiffening for accuracy sacrifices contact safety while softening yields by design. We make these interaction dynamics explicit and actuator-agnostic through a constant-$A_d$ double-integrator backbone, instantiating the offset-free architecture established for physical human-robot interaction (pHRI) and preserving its modeling assumptions on the reduced residual dynamics. An algebraic feedforward reduces the tendon transmission -- hydraulic, cable, pneumatic, twisted-string, or series-elastic -- to a constant-coefficient double integrator, so the QP cost inverse is precomputed offline and a 10-step receding-horizon QP runs at 500,Hz under contact-force (ISO/TS 15066), actuation, and jerk constraints. An encoder-only augmented-Kalman disturbance state drives steady-state error to zero under constant contact loads in the nominal detectable case. In simulation, a hydraulically actuated finger -- the worked example, adding pressure and cavitation constraints -- attains 0.6,mrad RMS, 0.1,mrad steady-state, and 7.3,mrad peak deflection under 1.5,Nm contact: 153$\times$, 1500$\times$, and 21$\times$ better than classical impedance. The realized first-move stiffness (18$\to$323,Nm/rad with update rate) is independently verified, and the architecture scales to a 16-DOF LEAP Hand MuJoCo model, recovering from 2.5,N grasp disturbances within 0.7,s.