Compliance-Based Sensor Placement for Force Sensing on a Sensorized Prostate Phantom

Object compliance perception enables the identification of soft materials, supporting tasks such as fruit detection and assisted medical palpation. Compliance perception requires sensing an object's deformation and contact forces. Existing vision-based tactile sensing for compliance perception usually depends only on force or deformation. However, deformation-based approaches cannot reliably quantify object compliance, while force-based methods are overly sensitive to geometric variations. To address these limitations, this paper presents a framework that fuses temporal force sequences and deformation field information. Specifically, time-varying contact forces are inferred from tactile image sequences via a neural network, while deformation characteristics are encoded using depth maps. Crucially, the temporal force sequence is used as a dynamic force-response feature for compliance recognition. In standard experiments, the force prediction error reaches 0.06 N within a measurement range of 12 N. The proposed method achieves a 98.0% Shore-hardness classification accuracy for samples ranging from 10 HA to 80 HA. In practical scenarios, including abnormal fruit detection and soft matter, the overall accuracy exceeds 98.5%. This method improves the compliance perception ability of artificial tactile systems and facilitates their deployment in embodied perception applications.

Humans rely on spatially dense, geometry and force-aware tactile feedback at high temporal resolution for dexterous manipulation. While vision-based tactile sensors enable dense force estimation, they are limited by camera frame rates, motion blur, and data bandwidth. Event-based optical tactile sensors offer an attractive alternative with microsecond temporal resolution and low motion blur, but existing methods are restricted to predicting only net forces. We introduce the first framework for dense 3D force field reconstruction using event-based optical tactile sensors. Our approach estimates 3D surface displacements from event data and maps them to forces via the inverse Finite Elements Method (iFEM). Shear displacements are recovered through the proposed event-based marker tracking algorithm, while normal displacements are predicted by a convolutional neural network trained on a collected dataset of synchronized force-displacement-event data. Experiments demonstrate accurate reconstruction of physically grounded forces, achieving a mean absolute error of (0.14 N, 0.10 N, 0.93 N) over force ranges up to (4 N, 4 N, 20 N), while operating at an average of 100 Hz. This work constitutes a first step toward enabling dense force feedback for high-frequency control in robotic grasping and dexterous manipulation.

Grasp force estimation can help prevent robots from damaging delicate objects during manipulation and improve learning-based robotic control. Integrating force sensing into deformable grippers negotiates trade-offs in cost, complexity, mechanical robustness, and performance. With the growing integration of RGB-D wrist cameras into robotic systems for control purposes, camera-based techniques are a promising solution for indirect visual force estimation. Current approaches mostly utilize end-to-end deep learning, which can be brittle when generalizing to new scenarios, while existing model-based approaches are unsuited to grasping and modern grasper geometries. To address these challenges, we developed a model-based visual force sensing approach integrating an iterative contact localization with generalization to unseen objects. The system extracts structural key points from wrist camera RGB-D images of deforming fin-ray-shaped soft grippers, and uses these key points to define parameters of an inverse finite element analysis simulation in Simulation Open Framework Architecture. The iterative contact localization sub-system utilizes a deep learning-based online 3D reconstruction and pose estimation pipeline to dynamically update contact location, and is robust to visual occlusion and unseen objects. Our system demonstrated an average root mean square error of 0.23 N and normalized root mean square deviation of 2.11% during the load phase, and 0.48 N and 4.34% over the entire grasping process when interacting with different objects under various conditions, showcasing its potential for real-time model-based indirect force sensing of soft grippers.