MinNav: Minimalist Navigation Using Optical Flow For Active Tiny Aerial Robots

Small aerial robots are particularly well-suited for search and rescue in confined and hazardous environments due to their agility, low cost, and ability to traverse through cluttered spaces that are inaccessible to larger platforms. However, enabling autonomous navigation in complete darkness remains a significant challenge, because small aerial robots cannot easily accommodate perception systems that demand substantial payload, power, or computation. In this work, we present a lightweight perception approach that combines a monocular event camera, a coded aperture lens, and an infrared dot projector to enable navigation in such conditions. The projected pattern, when imaged through the coded aperture, produces depth dependent blur signatures that implicitly encode scene geometry. We train a convolutional neural network to decode these signatures into dense depth maps using only synthetic data generated from a simple planar wall setup. Despite this minimal training regime, the model generalizes zero-shot to complex real-world scenes. Our system operates in real time at 20 Hz on a NVIDIA Jetson Orin Nano, demonstrating suitability for resource-constrained platforms. We further analyze the impact of different coded aperture designs on depth estimation performance. Our approach gives high accuracy (l1 error 7.0cm) upto 2.5m range (2.80% error). These results highlight the potential of combining structured illumination, coded optics, and event-based sensing for enabling robust perception and navigation in complete darkness.

Indoor search-and-rescue (SAR) operations often require rapid situational awareness where GNSS signals are unavailable and human access is difficult or hazardous. While most autonomous aerial systems rely on LiDAR, stereo vision, or specialized depth cameras, such solutions increase both hardware complexity and deployment costs. This paper presents a complete autonomous indoor navigation framework for low-cost unmanned aerial vehicles based exclusively on monocular vision. Implemented on a DJI Tello platform, the system combines monocular depth estimation using Depth Anything V2 with classical computer vision and lightweight deep learning models for scene understanding, victim detection, and hazard recognition. The framework consists of two independent behaviors: (i) corridor exploration with automatic door detection, room entry, OCR-based room identification, and victim inspection; and (ii) autonomous stair ascent based on TRISTAR (TRI-Signal STair Ascent Recognition), a novel triple-sensor fusion method that integrates structural cues (Sobel filtering), texture analysis (multi-scale Gabor filtering), and geometric depth from monocular depth estimation. Evaluation used real indoor flights in a university building. Depth calibration reduced relative depth error from 27.4% to below 10%, while the door detection algorithm reached a precision of 0.93 and an F1-score of 0.91. A dedicated ablation study shows that multi-sensor fusion significantly improves stair-recognition robustness compared to individual sensing modalities, and a failure-case analysis delineates the limits of monocular perception under challenging lighting and reflective surfaces. The results demonstrate that reliable indoor exploration and stair traversal are achievable on resource-constrained platforms without specialized ranging hardware, a practical, cost-effective solution for rapid SAR deployment.

Autonomous FPV quadrotor flight in complex environments using a monocular RGB camera as the sole exteroceptive sensor remains a fundamental challenge. Recent research has shown that using optical flow as the input of a neural network can achieve end-to-end autonomous flight in cluttered scenes. However, extracting the most relevant information from the flow estimation is the key bottleneck limiting agility and robustness. Existing methods struggle to disentangle obstacle-induced optical flow from the ego-motion background flow and suffer from low signal-to-noise ratios near the focus of expansion (FoE). To address these issues, we decompose the optical flow into translational and rotational components and utilize only the translational flow, which captures scene geometry and depth cues. In addition, we introduce an uncertainty mask derived from inconsistencies between forward and backward flow estimates. This mask highlights obstacle structures, including those within the FoE region. Both cues are fed to a control policy trained in a differentiable simulation framework, which enables efficient first-order optimization across perception and control. We validate our approach through extensive experiments in both simulated and real-world forest environments. The proposed system achieves robust flight at speeds of up to 13.91 m/s in simulation and 11.79 m/s in real-world tests, with a 93.3% success rate over 30 real-world trials, nearly doubling the previously reported 6 m/s real-world speed of the monocular-RGB optical-flow UAV obstacle avoidance system.