eess.SPJun 10, 2026

NARRAS: Edge-Triggered Distributed Inference for CSI-Based Localization in Vehicular IoT Networks

Authors: Rodrigo OliverRicardo Vazquez AlvarezAlejandro LanchoStefano Rini

Organizations: Signal Theory and Communications Department, Universidad Carlos III de Madrid, Legan´es, 28911, Spain · Gregorio Mara˜n´on Health Research Institute, Madrid, 28007, Spain · Department of Electrical and Computer Engineering, National Yang-Ming Chiao-Tung University (NYCU), Hsinchu, Taiwan · German Aerospace Center (DLR), Oberpfaffenhofen, Germany

Abstract

CSI-based localization with spatially distributed antenna arrays exposes a basic resource trade-off. Each array can provide a rich view of the channel, but forwarding observations from all arrays to a fusion center is wasteful when only a few carry useful information, and the shared uplink supports only a limited number of simultaneous transmissions. We let each array decide locally whether its current observation is worth reporting, subject to a budget on the average number of active transmitters. We refer to this abstraction as Edge-Triggered Distributed Inference (ETDI). It captures a broader class of task-oriented communication problems where resource-constrained devices share an access channel for a common inference task. We instantiate ETDI for CSI-based localization, a common scenario in vehicular IoT networks. Spatially distributed remote antenna arrays (RAAs) encode local channel state information (CSI) from user equipment (UE) transmissions into latent features, and the fusion center estimates the UE position from the subset of reported features. We propose NARRAS, a decentralized reporting policy in which each RAA combines a recurrent summary of its recent observations with a memory of the last latent it transmitted. Training controls an explicit activity budget through differentiable activity penalties and validation-calibrated deterministic thresholds, and uses channel-chart regularization to shape the latent geometry. Experiments show that, at comparable uplink activity, NARRAS improves localization accuracy over learned and heuristic sparse-reporting strategies, while dense full-report models remain useful budget-free references. In low-activity regimes, chart regularization further reduces high-percentile localization errors, suggesting that geometry-aware latent representations are more robust under sparse reporting.

Explore similar work

Apr 23, 2026cs.RO

Ufil: A Unified Framework for Infrastructure-based Localization

Infrastructure-based localization enhances road safety and traffic management by providing state estimates of road users. Development is hindered by fragmented, application-specific stacks that tightly couple perception, tracking, and middleware. We introduce Ufil, a Unified Framework for Infrastructure-Based Localization with a standardized object model and reusable multi-object tracking components. Ufil offers interfaces and reference implementations for prediction, detection, association, state update, and track management, allowing researchers to improve components without reimplementing the pipeline. Ufil is open-source C++/ROS 2 software with documentation and executable examples. We demonstrate Ufil by integrating three heterogeneous data sources into a single localization pipeline combining (i) vehicle onboard units broadcasting ETSI ITS-G5 Cooperative Awareness Messages, (ii) a lidar-based roadside sensor node, and (iii) an in-road sensitive surface layer. The pipeline runs unchanged in the CARLA simulator and a small-scale CAV testbed, demonstrating Ufil's scale-independent execution model. In a three-lane highway scenario with 423 and 355 vehicles in simulation and testbed, respectively, the fused system achieves lane-level lateral accuracy with mean lateral position RMSEs of 0.31 m in CARLA and 0.29 m in the CPM Lab, and mean absolute orientation errors around 2.2°. Median end-to-end latencies from sensing to fused output remain below 100 ms across all modalities in both environments.
Simon Schäfer, Lucas Hegerath, Marius Molz +2
Jun 19, 2026cs.RO

Ultra-Fusion: A Resilient Tightly-Coupled Multi-Sensor Fusion SLAM Framework under Sensor Degradation and Spatiotemporal Perturbation for Intelligent Transportation Systems

Reliable localization is essential for intelligent transportation systems (ITS), including autonomous vehicles, quadruped last-mile carriers, and infrastructure-inspection unmanned aerial vehicles (UAVs). Although tightly-coupled multi-sensor fusion improves accuracy in favorable conditions, deployed systems remain vulnerable to sensor degradation -- poor illumination, LiDAR degeneracy, wheel slippage, and GNSS outage -- and to spatiotemporal calibration errors. These failures are common in urban canyons, tunnels, and high-speed corridors, where localization drift can degrade route tracking, tunnel passage continuity, and local map alignment. This paper presents Ultra-Fusion, a tightly-coupled multi-sensor localization framework based on a unified sliding-window estimator. Asynchronous measurements are timestamp-ordered and converted into optional factors within one optimization window, supporting WIO, VIO, LIO, and LVIO with optional wheel and GNSS augmentation. Observability-aware initialization selects the bootstrap mode, factor-wise reliability scheduling gates degraded measurements, and online LiDAR--IMU spatiotemporal calibration refines temporal offsets and rotational extrinsics during operation. We extend the M3DGR benchmark with simulation trajectories and evaluate more than 60 open-source SLAM systems on M3DGR, M2DGR-Plus, KAIST, GrandTour, and MARS-LVIG. The results show competitive accuracy across wheeled, legged, and aerial platforms under long-duration and high-speed operation, degradation, and calibration perturbation, improving localization availability for road-level autonomy, campus and warehouse mobility, and low-altitude aerial inspection. To benefit the industrial and academic community, we will release source code and datasets upon paper acceptance.
Yihong Tian, Junjie Zhang, Liuyang Li +3
May 31, 2026eess.SP

Spatially Distributed Task-Oriented Compression for Multi-Emitter Localization and Characterization with Spectral Overlap

Radio frequency spectrum awareness requires the ability to detect, localize, and characterize emitters in dense and contested wireless environments. In this work, we propose a task-oriented distributed compression framework for joint multi-emitter localization and characterization using spatially distributed receivers. Each receiver observes a short window of complex IQ samples, converts the observation to a time--frequency representation, and encodes it into a compact latent vector. A central fusion decoder combines the receiver latents to estimate an unordered set of active emitters, including their locations, center-frequency offsets, occupied bandwidths, and waveform families. A permutation-invariant training objective is used to handle the arbitrary ordering of emitters and predictions. Experiments on synthetic multi-emitter scenes with spectral overlap show that even extremely compact receiver-side representations can preserve useful information for emitter counting and waveform-family estimation. However, accurate localization and spectral-parameter regression require larger latent dimensions. Increasing the receiver latent dimension from drx=1d_{\mathrm{rx}}=1 to drx=16d_{\mathrm{rx}}=16 provides the largest improvement, while further increasing to drx=64d_{\mathrm{rx}}=64 gives smaller gains. These results demonstrate the potential of learned task-oriented compression for communication-efficient distributed spectrum awareness.
H. Nazim Bicer, J. Nicholas Laneman