The quality of recorded data depends on the stability of the sensor system that acquires it. Sensor motion and aging can degrade the performance and stability of downstream data-driven methods. We present a Wasserstein-GAN-inspired approach for unsupervised inference of physically interpretable transformation parameters that map a changed detector response distribution back to a nominal reference distribution. In contrast to standard generative modeling, the generator is used as a learnable calibration transformation whose trainable weights represent the sought parameters, while the critic provides a distributional distance signal via the Wasserstein objective. We validate the approach on a tracking-detector toy model with controlled layer shifts and demonstrate its application on high-granularity Geant4-simulated calorimeter data with cell-wise aging effects. The method recovers aging coefficients for individual cells with correlation to ground truth and improves agreement between calibrated and reference energy-sum distributions, while exhibiting the expected degradation at increasing channel-to-channel noise levels. These results indicate that adversarial distribution matching can serve as a data-driven component of calibration strategies in settings where direct labels for degradation parameters are unavailable.
Distributional causal inference requires estimating not only average treatment effects but also interventional outcome distributions, including quantiles, tail risks, and policy-dependent uncertainty. As a method for distributional causal inference, generative adversarial network (GAN)-based counterfactual methods are flexible tools for this task. However, these methods have several limitations. First, the objectives of certain techniques do not coincide with the statistical risk of the identifiable causal target, and therefore provide limited theoretical guarantees regarding estimable counterfactual distributions or optimality. Second, they tend to rely on unstable density-based methods, such as density ratio estimation. In this paper, we propose GANICE (GAN for Interventional Conditional Estimation) with several advantages: it (i) clarifies the conditional interventional distribution for each treatment--covariate state as the causal estimation target; (ii) estimates the conditional distribution such that its averaged Wasserstein risk is minimized; (iii) establishes minimax optimality. GANICE achieves these advantages through the introduction of the extended Wasserstein distance, the incorporation of a cellwise critic in its dual, and an optimality proof based on Besov space theory. Our experiments demonstrate that GANICE consistently outperforms existing methods.
Conformal prediction converts point predictions into set-valued predictions with coverage guarantees under exchangeability between calibration and deployment data. We study conformal calibration transfer, where this requirement fails because labeled calibration is available only in a source space, while prediction sets are needed in a target space linked to the source through unlabeled paired observations (e.g., paired modalities or sensor changes). We propose Transported Conformal Calibration (TCC): we transport labeled source calibration into the target space using the paired data, and then correct residual post-transport mismatch using only unlabeled target inputs. We instantiate this correction with two complementary methods: TCC-KS, which uses a label-free uncertainty surrogate to detect mismatch and adjust calibration conservatively, and weighted-TCC, which reweights transported calibration toward the target domain for improved efficiency when weights are stable. We provide finite-sample target-domain coverage guarantees that adapt to an observable measure of mismatch. Across CIFAR-100-C, Tiny-ImageNet-C, and SEN12MS, we show reliable target-domain coverage transfer without labeled target calibration data, with label-free diagnostics that predict when correction is needed.
Calibration remains one of the principal obstacles to the deployment of machine learning in scientific instrumentation because it typically relies on expert intervention, dedicated procedures, and manually labelled data. We introduce a physics-informed self-supervised framework that jointly learns latent detector calibration parameters and task-specific predictions directly from raw measurements without requiring pre-calibrated signals or external labels. The method exploits known physical constraints to generate pseudo-labels iteratively, transforming calibration into a self-supervised optimization problem. The approach is demonstrated for ionic charge-state determination in the VAMOS++ magnetic spectrometer, where the calibration of a segmented ionization chamber and the inference of ionic charge states are learned simultaneously. Starting from a weak prior on the mean ionic charge state, the model progressively refines its predictions through iterative fractional pseudo-labelling driven by the discrete nature of atomic masses. Beyond accurate ionic charge-state reconstruction, the inferred calibration coefficients provide a compact representation of the detector state that enables automated monitoring of gain drifts, pressure variations, and detector aging. The resulting labels can subsequently be transferred to specialized models that quantify detector imperfections and track their spatial and temporal evolution. These results establish a general paradigm for self-calibrating and self-monitoring scientific instruments and represent a step toward intelligent experimental systems capable of autonomous calibration, analysis, and performance optimization.