Non-line-of-sight imaging with arbitrary relay surface geometries via 3D Gaussian Transient Rendering
Authors: Yi Wang, Ziyu Zhan, Yuran Wang, Hao Wang, Qiang Liu, Zuoqiang Shi, Lingyun Qiu, Xing Fu
Organizations: Department of Precise Instrument, Tsinghua University, China · Department of Electrical Engineering, City University of Hong Kong, China · Yau Mathematical Science Center, Tsinghua University, China
Abstract
Imaging objects hidden outside the direct line of sight expands the effective field of view and is critical for applications such as autonomous driving and robotic perception. Despite impressive progress in time-of-flight (ToF)-based non-line-of-sight (NLOS) imaging, real-world deployment remains challenging because practical measurements are often collected over spatially limited, arbitrarily shaped relay regions-conditions that violate the planar-wall and dense-sampling assumptions made by most existing methods. To address these limitations, we propose a LOS-guided NLOS imaging pipeline that imposes no geometric assumptions on the relay surface and naturally supports both confocal and non-confocal configurations. Our method represents the hidden scene using 3D Gaussian primitives and couples them with an efficient, differentiable transient rendering model, enabling end-to-end optimization directly from measured transients. We validate our approach on real-world measurements from both a public dataset and a custom-built capture system. Across settings, our method achieves state-of-the-art reconstruction fidelity under spatially limited, sparsely sampled conditions, and significantly outperforms existing methods on complex, arbitrary relay surface geometries.
LiDARs are being increasingly deployed for consumer imaging in handheld, wearable, and robotic applications. These sensors can capture the time-of-flight of light at picosecond resolution, which in principle, enables them to capture information about objects hidden from their field of view. While such non-line-of-sight (NLOS) imaging capabilities have been shown on research-grade LiDARs, they are challenging to achieve on consumer devices due to poor signal quality resulting from low laser power, low spatial resolution, and object and camera motion. Inspired by burst photography and synthetic aperture radar, we propose a multi-frame fusion strategy to overcome these challenges and demonstrate NLOS imaging on consumer LiDAR. We first introduce the motion-induced aperture sampling model to unify the effects of object shape, object motion, and camera motion under a single measurement model. Using this model, we demonstrate several NLOS capabilities on a smartphone-grade LiDAR: (1) 3D reconstruction, (2) single and multi-object tracking, and (3) camera localization using hidden objects. Previously, NLOS imaging capabilities were largely restricted to bulky and expensive research-grade hardware that requires extensive setup and calibration. Our results represent a shift towards plug-and-play NLOS imaging, where anyone can image hidden objects with off-the-shelf hardware ($<100) and no additional setup. We believe that democratization of such capabilities will advance consumer applications of NLOS imaging.
Siddharth Somasundaram, Aaron Young, Akshat Dave +2
Consumer LiDARs in mobile devices and robots typically output a single depth value per pixel. Yet internally, they record full time-resolved histograms containing direct and multi-bounce light returns; these multi-bounce returns encode rich non-line-of-sight (NLOS) cues that can enable perception of hidden objects in a scene. However, severe hardware limitations of consumer LiDARs make NLOS reconstruction with conventional methods difficult. In this work, we motivate a complementary direction: enabling NLOS perception with low-cost LiDARs through data-driven inference. We present DENALI, the first large-scale real-world dataset of space-time histograms from low-cost LiDARs capturing hidden objects. We capture time-resolved LiDAR histograms for 72,000 hidden-object scenes across diverse object shapes, positions, lighting conditions, and spatial resolutions. Using our dataset, we show that consumer LiDARs can enable accurate, data-driven NLOS perception. We further identify key scene and modeling factors that limit performance, as well as simulation-fidelity gaps that hinder current sim-to-real transfer, motivating future work toward scalable NLOS vision with consumer LiDARs.
Reconstructing object geometry from radio frequency (RF) signals is fundamentally challenging due to the lensless imaging nature of RF sensing, which leads to low spatial resolution and high noise. Unlike light signals, RF signals can penetrate occlusions and thus capture information about hidden scenes. Existing Non-Line-of-Sight (NLoS) 3D neural reconstruction methods can recover coarse surfaces inside enclosed environments but often suffer from unstable optimization, noisy surface geometry, and surface ambiguity, failing to produce accurate zero-level sets from the signed distance field (SDF). These limitations largely stem from neglecting the role of Line-of-Sight (LoS) geometry outside the enclosed region, which provides valuable physical constraints for modeling signal propagation. In this paper, we introduce a Unified LoS and NLoS neural geometry reconstruction framework GeRaF 2.0 that leverages the outside LoS geometry to model and guide RF propagation from the LoS region into the NLoS region. By integrating visual LoS priors into the neural field formulation, GeRaF 2.0 achieves stable training and physically consistent reconstruction of both visible and hidden geometry, setting a new state-of-the-art in RF-based geometry reconstruction.