The development of trajectory planning strategies for autonomous ground vehicles (AGVs) represents a prevailing research interest within the domain of intelligent transportation systems. This paper introduces a trajectory planning framework tailored for multi-floor scenarios. The framework consists of two main modules: the task planning module and the trajectory planning module. The task planning module involves a strategic selection phase, where a task planning strategy based on generalized voronoi diagrams (GVD) and multi-objective algorithms is proposed to select the floor exits for each floor. The trajectory planning module utilizes optimization-based methods to generate high-quality trajectories, and a warm-started hierarchical planning framework is designed to ensure rapid convergence. Additionally, for handling complex obstacle constraints, a correlation constraint calculation method is designed for reducing obstacle constraints in trajectory planning. Finally, the feasibility and effectiveness of the proposed framework are verified through simulations.
Autonomous exploration of multi-floor buildings remains challenging for ground robots because conventional 2D and 2.5D maps cannot represent overlapping traversable surfaces such as stairs, ramps, and multiple reachable elevations. This letter presents a multi-floor exploration framework based on an incremental reachable graph. Built as a sparse graph over reachable support surfaces, the graph preserves potentially valid connectivity through tentative graph elements under sparse observations and enables stable, physically reachable frontier detection. To guide exploration beyond the currently mapped floor, we project task-zone priors from an explored floor to initialize a hypothetical graph on the target floor and reconcile it incrementally with incoming observations. A hierarchical planner then jointly reasons over confirmed and hypothetical structures for global guidance. In simulation, the proposed method demonstrates improved exploration efficiency and mapping completeness compared to evaluated baselines. Furthermore, onboard real-world experiments validate its practical feasibility and real-time performance.
This paper presents a learning-augmented trajectory planning framework for cooperative unmanned aerial vehicle (UAV) and unmanned ground vehicle (UGV) handover missions. While centralized trajectory optimization ensures dynamic feasibility and task optimality, its high computational cost limits real-time applicability. We propose a neural surrogate planner utilizing decoupled encoder-decoder long short-term memory (LSTM) networks to generate coordinated handover trajectory predictions from the task specifications. These predictions serve as informed warm starts for the downstream centralized optimizer, thereby accelerating convergence to dynamically feasible solutions. Benchmark evaluations demonstrate that the learning-augmented planning framework achieves more than a threefold speedup and 100% optimization success rate compared to cold start optimization. The results indicate that combining data-driven inference with model-based refinement enables fast and reliable trajectory generation for heterogeneous multi-robot systems.
This paper presents a two-stage trajectory planning framework for a multi-UAV rigid-payload cascaded transportation system, aiming to address planning challenges in densely cluttered environments. In Stage I, an Enhanced Tube-RRT* algorithm is developed by integrating active hybrid sampling and an adaptive expansion strategy, enabling rapid generation of a safe and feasible virtual tube in environments with dense obstacles. Moreover, a trajectory smoothness cost is explicitly incorporated into the edge cost to reduce excessive turns and thereby mitigate cable-induced oscillations. Simulation results demonstrate that the proposed Enhanced Tube-RRT* achieves a higher success rate and effective sampling rate than mixed-sampling Tube-RRT* (STube-RRT*) and adaptive-extension Tube-RRT* (AETube-RRT*), while producing a shorter optimal path with a smaller cumulative turning angle. In Stage II, a convex quadratic program is formulated by considering payload translational and rotational dynamics, cable tension constraints, and collision-safety constraints, yielding a smooth, collision-free desired payload trajectory. Finally, a centralized geometric control scheme is applied to the cascaded system to validate the effectiveness and feasibility of the proposed planning framework, offering a practical solution for payload attitude maneuvering in densely cluttered environments.