Enhancing Robustness in Robot-Environment Interactions through Passive Compliant Degrees of Freedom: A Hybrid Position-Force Control Approach with Feedback Linearization

Dexterous manipulation is fundamentally a problem of interaction dynamics: the hand must track precise finger trajectories, regulate the contact force exchanged with grasped objects, respect actuation and safety limits, and remain predictable when contact persists -- objectives in tension for any fixed-gain controller. A sustained contact torque $τ_{\text{ext}}$ through a joint stiffness $K_d$ produces the structural bias $e_\infty=τ_{\text{ext}}/K_d$, so stiffening for accuracy sacrifices contact safety while softening yields by design. We make these interaction dynamics explicit and actuator-agnostic through a constant-$A_d$ double-integrator backbone, instantiating the offset-free architecture established for physical human-robot interaction (pHRI) and preserving its modeling assumptions on the reduced residual dynamics. An algebraic feedforward reduces the tendon transmission -- hydraulic, cable, pneumatic, twisted-string, or series-elastic -- to a constant-coefficient double integrator, so the QP cost inverse is precomputed offline and a 10-step receding-horizon QP runs at 500,Hz under contact-force (ISO/TS 15066), actuation, and jerk constraints. An encoder-only augmented-Kalman disturbance state drives steady-state error to zero under constant contact loads in the nominal detectable case. In simulation, a hydraulically actuated finger -- the worked example, adding pressure and cavitation constraints -- attains 0.6,mrad RMS, 0.1,mrad steady-state, and 7.3,mrad peak deflection under 1.5,Nm contact: 153$\times$, 1500$\times$, and 21$\times$ better than classical impedance. The realized first-move stiffness (18$\to$323,Nm/rad with update rate) is independently verified, and the architecture scales to a 16-DOF LEAP Hand MuJoCo model, recovering from 2.5,N grasp disturbances within 0.7,s.

Physical human-robot interaction requires yielding transiently to contact yet recovering the commanded reference under sustained load. Finite-stiffness impedance control retains a static deflection there, while predictive alternatives typically optimize a nonlinear robot or impedance model online. Operational-space cancellation instead exposes a translational error double integrator with a fixed transition matrix and a configuration-scheduled input map, making interaction a predictive quantity rather than a property re-derived per configuration. We build on it a compact offset-free interaction-error MPC for torque-controlled manipulators: a force-domain random-walk state estimates persistent interaction and model error, and a 30-variable convex QP maps the correction through the current task inertia while constraining the applied joint torque. Conditional results establish impedance equivalence of the unconstrained passive feedback, offset-free regulation at feasible frozen configurations, and quadratic stabilizability of the scheduled backbone. In a 1kHz MuJoCo simulation of a 7-DOF Franka FR3, the estimator cuts steady-state error under a repeated 15N step from 2.77mm to 0.042mm when added to the otherwise identical 100Hz MPC. A stiffness-and-damping-calibrated impedance baseline attains 2.59mm but briefly saturates and needs 3.3x the peak positive joint power. Adding ideal measured-force cancellation to that baseline gives 1.39mm, so constant-load rejection is not unique to MPC; the sensorless controller still reaches 0.042mm in the moving task, a 65x reduction without force sensing and without the baseline's saturation or power cost. Demonstrated in simulation under a shared actuator budget, the contribution is an efficient operational-space realization complementing rather than replacing broader interaction-control architectures.

In this paper, we address the challenge of performing non-prehensile pushing operations with a compliant robotic manipulation system. To ensure safe operations in human-populated environments, robots must comply with external physical interactions and exhibit passive behavior. To achieve this, we extend a state-of-the-art pushing model to integrate it with impedance-controlled robots. We develop a model predictive control framework built upon this model that enables compliant pushing through optimal modulation of the robot's position/velocity set-point, jointly realizing the required pushing force and contact point adaptation to obtain desired object motion. However, external interactions may induce tracking errors, causing a consequent potentially indefinite increase of the pushing force. To prevent this, we integrate an energy tank passivity filter that further modulates the robot velocity set-point to guarantee passivity and avoid uncontrolled energy buildup. The proposed method has been rigorously tested in simulation and validated through experiments on two different robotic systems, demonstrating passive compliance during human-robot interactions and assessing trajectory tracking performance and robustness to variations in the object's physical parameters.