The four-channel teleoperation architecture is a well-established framework for achieving transparency in bilateral systems. However, its performance in human-scale teleoperation is limited by high inertia, modeling challenges, and reliance on noisy and costly force/torque sensors. This paper introduces a sensorless four-channel architecture based on inverse dynamics modeling. The controller is implemented and validated on a customized WAM bilateral teleoperation setup. Experiments demonstrate that the proposed approach outperforms conventional two- and four-channel schemes as well as transparency-enhancement methods, improving position and force tracking, reducing operator effort, and increasing maximum transmittable impedance without external sensors. A door-opening case study involving sustained whole-body contact along the manipulator further demonstrates the effectiveness of the method in realistic human-scale manipulation tasks.
This paper presents an immersive bilateral teleoperation framework for beyond-human-scale manipulators, combining motion/force transparency with enhanced operator embodiment through virtual reality (VR) and distributed haptic feedback. The platform integrates a full-scale industrial hydraulic manipulator, a 7-DoF haptic exoskeleton, and head-tracked visual feedback to reinforce operator agency and self-location. A force-sensorless adaptive controller incorporates an augmented human-robot dynamic model to address master-surrogate asymmetries, input nonlinearities, model uncertainties, and communication delays. Rigorous analysis establishes semi-global uniform ultimate boundedness of the closed-loop system. Extensive full-scale experiments demonstrate precise motion and force tracking with scaling up to 1:13 and 1:1000, respectively, and fixed or time-varying delays up to 150 ms. Coordinated 6-DoF pick-and-place and multi-axis contact tasks further validate system performance. A ten-participant user study supports system usability and indicates approximately 50% higher normalized embodiment scores with VR than with monitor-based feedback. These results advance intuitive, force-reflected remote manipulation at industrial scale.
Existing bilateral teleoperation platforms still rely on costly rigid six-axis force/torque sensors, tightly coupled leader-follower hardware, and kilohertz control loops. We present a Cartesian bilateral framework built on the hardware-agnostic WinGs Operating Studio (WOS) middleware, in which a low-cost compliant 6-DOF pose-and-force sensing end-effector, Delta6, is mounted on both sides so that each manipulator behaves as an end-effector 6-DOF series elastic actuator (SEA). The leader runs a damping-only admittance loop with a 6-D biquad notch filter; the follower realizes a stiffness-damping impedance through a position-based outer loop with a PID wrench-to-pose mapping. Three time scales (hardware I/O, mid-rate impedance/admittance, low-rate teleoperation messages) are explicitly decoupled, enabling the same application to drive heterogeneous arms. On a Lite6/FR3 testbed at 150 Hz, the system tracks stably under delays up to 120±40 ms and 1% packet loss, matches the prescribed virtual stiffness in contact, and shows a favorable cumulative energy signature in passivity-style tests.
Dexterous teleoperation requires precise arm-hand coordination, low-latency feedback, and robust interaction in real-world contact-rich environments. This paper presents a modular bilateral teleoperation framework that integrates operator-side input interfaces with a robot-side dexterous hand and compliant robotic arm in a unified control architecture. The system supports position-based hand retargeting, differential arm control, multi-scale haptic feedback, and shared control for stable manipulation. We validate the framework through a real-world dexterous manipulation task, highlighting coordinated arm-hand control and contact-aware interaction. Beyond feasibility, we identify key design insights related to cross-embodiment mismatch, haptic feedback granularity, and shared control. The proposed platform provides a practical teleoperation system and a foundation for collecting high-quality demonstrations for future learning-from-demonstration research.
Stefano Dalla Gasperina, Dong Ho Kang, Haiyun Zhang +10