Biomechanics-aware Multi-view Markerless Motion Capture of Dexterous Hand Movements

Accurate hand and finger tracking from video has significant clinical applications for monitoring activities of daily living and measuring range of motion, yet monocular video approaches for obtaining hand biomechanics remain under-developed. We present a method that combines the SAM 3D Body foundation model with inverse kinematics optimization in a full-body biomechanical model to extract anatomically-constrained finger joint angles from single-view video. We port SAM 3D Body from PyTorch to JAX for integration with MuJoCo-MJX, enabling GPU-accelerated optimization, and develop a novel mapping between the Momentum Human Rig (MHR) outputs and biomechanical model markers. Validation against 8-camera multiview reconstruction on 4,590 frames from 7 participants performing a variety of hand poses and object manipulation tasks shows finger joint angle errors of approximately 10 degrees and hand position errors of approximately 6 mm, after Procrustes alignment. Results were consistent across camera viewpoints and robust to different methods for producing reference values from multiview video. This work extends monocular biomechanical analysis to detailed finger tracking, expanding access to quantitative characterization of hand movement from readily available video.

Learning manipulation from human video requires high-fidelity hand-motion reconstruction in metric units. Today's metric hand labels come from studio rigs and instrumented headsets, and both are confined in the same two ways: neither leaves a prepared setting, and neither is checked against an independent reference. Unconstrained head-worn recording promises the opposite trade-off, scaling with the number of people wearing a device. We therefore introduce MEgoVista, an offline pipeline that turns a single unprepared MEgo View recording into metric two-hand and head motion in one gravity-aligned world frame. Three properties set it apart from existing egocentric reconstruction systems: first, it reconstructs in settings studio volumes and tabletop rigs cannot reach, settling hand ownership at detection so bystander hands stay out of the wearer's trajectory; second, it takes its metric gauge from calibrated stereo rather than a monocular prior, installing scale at initialisation so policies receive physical units, not arbitrary coordinates; third, both outputs are scored inside a motion-capture volume against independent Chingmu optical capture, under a protocol that audits its own reference and charges what a method declines to predict. MEgoVista is offered as a measured route from egocentric video to metric hand supervision, one that widens where such labels can be gathered.

Robust, high-fidelity 3D hand capture, while fundamental to digital human creation, remains challenging with practical multi-view systems that balance rich photometry with the geometric ambiguities of reconstruction arising from limited viewpoint density. This paper presents an end-to-end pipeline for dynamic hand performance capture and registration, specifically designed for view-efficient setups ($\sim$20 views). We address key challenges with two primary innovations. First, to overcome reconstruction difficulties like limited view overlap and background clutter, our mask-free neural method robustly extracts detailed hand geometry and appearance from unmasked images using scene parameterization and scenario-specific density regularization. Second, addressing registration challenges such as accurately capturing non-linear skin deformations and ensuring plausible results during severe self-contact, we propose a physics-inspired framework. It aligns reconstructions to a personalized hand model by optimizing intrinsic volumetric offsets within its canonical tetrahedral mesh, alongside pose parameters. This approach, supported by robust losses and optimization, captures fine surface deformations, ensures plausible results under severe articulation and self-contact, and demonstrates strong tolerance to input noise. We demonstrate the scalability and robustness of our automated pipeline on an extensive dataset of over 12,000 sequences, from which we also derive a large-scale, high-quality synthetic 2D/3D hand dataset for training downstream tasks. This showcases its effectiveness for single hands, intricate two-hand interactions, and natural hand-object manipulations. Our method achieves state-of-the-art reconstruction fidelity in view-efficient, unmasked scenarios and highly accurate registration. Our project page are available at https://vephand.github.io/.