MIRA: A Modular Open-Source Micro-UAV for Indoor Research

Infrastructure maintenance, contact-based inspection, and emergency response can benefit from aerial vehicles that act as a flying human hand with extreme maneuverability, manipulation, and resiliency (MMR): maneuverability to fly in arbitrary orientations to reach remote and tight locations; manipulation to point sensors, turn valves, and press tools at arbitrary orientations; resiliency to maintain accurate motion and force control despite disturbances from arbitrary directions, such as wind, ground effects, and friction. Realizing MMR on aerial vehicles requires not only omnidirectional flight; it also requires (I) vectoring of maximum thrust in any direction, to maximize capacity for contact-force application and disturbance rejection, (II) global stability, to enable control over any orientation/position, and (III) compact, standard designs that build upon platforms such as quadrotors to inherit technological know-how. No current aerial vehicle simultaneously enables I--III, due to structural and control limitations that constrain actuation. We present MorphQuad: a morphable quadrotor that enjoys MMR. Key to our approach is a hardware and control co-design: on hardware, we independently articulate each of the four rotor systems via two-axis gimbals; on control, we introduce globally-stable control, and energy-optimal thrust allocation that permits inter-rotor thrust cancellations only to avoid downwash interference and gimbal lock. With fully-onboard autonomy, MorphQuad demonstrates multi-revolution rotation while translating or hovering, for pipe inspection and target tracking (maneuverability); valve turning, perching, and object pressing and pushing with human-level strengths (manipulation); and wind rejection from any direction, even directed to a single rotor, and push-pull recovery (resiliency).

Miniaturized Uncrewed Aerial Vehicles (UAVs) can access indoor and hard-to-reach spaces, but severe constraints on payload and autonomy have limited their use in demanding tasks such as high-quality 3D reconstruction. We introduce a novel system architecture that enables autonomous, high-fidelity 3D scanning of static objects with sub-100 gram UAVs. Our core innovation lies in a closed-loop active viewpoint selection framework specifically tailored for ultra-constrained micro-platforms, advancing beyond standard static or offline active reconstruction methods. The framework establishes a dual-reconstruction pipeline that creates a real-time (RT) feedback loop between data capture and flight control. A near-RT process uses Structure-from-Motion (SfM) to generate an instantaneous point-cloud of the object. A systematic trajectory adaptation algorithm analyzes the model quality on the fly and dynamically adapts the UAV's trajectory based on parameterized spatial partitioning to intelligently capture new images of poorly covered areas, ensuring comprehensive acquisition. For the final, high-fidelity output, a non-RT pipeline employs a Neural Radiance Fields (NeRF)-based Neural 3D Reconstruction (N3DR) approach, fusing SfM-derived camera poses with precise external location data, evaluated across both radio-based Ultra Wideband (UWB) and visual motion-capture setups, to correct sensor noise and achieve superior accuracy. We implemented and validated this architecture using Crazyflie 2.1 UAVs. Our experiments, conducted in both single- and multi-UAV configurations show that algorithmic dynamic trajectory adaptation consistently improves reconstruction quality over static flight paths. This work demonstrates a scalable and autonomous solution that unlocks the potential of miniaturized UAVs for fine-grained 3D reconstruction, a capability previously reserved for much larger platforms.

Fast dynamic obstacle avoidance (DOA) on uncrewed aerial vehicles (UAVs) demands not only low-latency control and actuation but also reliable perception with sufficient sensing range for accurate obstacle detection and speed estimation. This letter presents, to the best of our knowledge, the first mmWave RADAR-based perception-and-control system for fast onboard DOA. We derive and analyze latency and spatial bounds that relate sensing range, relative speed, and control delay, yielding sufficient conditions for successful avoidance. Our system adopts a lightweight tracker based on interacting multiple models and a controller based on control-barrier functions that directly outputs evasive accelerations. It achieves position errors of less than 0.15 m, 0.93 m, and 0.87 m in x, y, and z directions for 300 experiments with three different object sizes and varying visibility (light and dark), and a similar spread for 90 experiments in smoke. An onboard implementation on a Raspberry Pi 4B demonstrates real-time feasibility with an end-to-end sensing-to-command latency of approximately 14 ms. Code and the full dataset of 390 throws are available (https://tinyurl.com/radardoagit).