In bearing vibration datasets, most samples receive predicted fault probabilities close to 0 or 1, while samples with intermediate (gray-zone) probabilities are rare. Such borderline samples are important because they reflect conditions in which maintenance decisions may require additional inspection or a conservative response and are useful for studying decision boundaries. To address this scarcity, this paper proposes and compares two approaches that generate vibration signals whose predicted fault probability matches a target probability of 0.25, 0.50, or 0.75. We use the average output of a heterogeneous ensemble classifier with different architectures and random initializations as a fixed, gradient-accessible probability oracle. The first, training-based approach, Probability-Regularized Generative Adversarial Network (PR-GAN), extends Wasserstein Generative Adversarial Network with Gradient Penalty (WGAN-GP) and edits a real signal through a residual generator while pushing the classifier output toward the target probability. The second is a training-free, per-sample Wachter-style counterfactual (CF) procedure that directly optimizes each input signal to reach the target probability while remaining close to the source signal. We evaluate both methods on the Case Western Reserve University (CWRU) and Paderborn bearing datasets using mean absolute target-probability error, time-domain total variation, and frequency-domain log power spectral density (log-PSD) differences. Across all settings, CF reaches the target with a mean absolute probability error of 0.005-0.008 and a within-tolerance success rate of 1.000 on retained samples, whereas PR-GAN's mean error is 0.046-0.059 with success rates between 0.501 and 0.680. CF therefore steers the probability more reliably and requires smaller average L1 changes, whereas PR-GAN has a lower reported runtime in most settings.
Vibration-based bearing fault diagnosis requires resolving three interrelated measurement challenges, including the trade-off between global statistical feature efficiency and local transient signal fidelity, insufficient traceability of measurement features to underlying fault physics, and ineffective multi-source measurement information fusion across diagnostic scales. This paper presents a progressive physics-guided multi-scale vibration signal processing framework that addresses all three challenges within a unified diagnostic pipeline. An 81-dimensional measurement descriptor, derived from bearing kinematic theory and characteristic defect frequencies, establishes a physically traceable feature space enabling real-time fault screening at approximately 20 ms per sample. A fault-adaptive signal segmentation mechanism then directs analytical attention toward fault-relevant waveform regions guided by physics-based priors, without manual feature engineering. Structured fault mechanism knowledge is further encoded implicitly in model parameters during training, enabling autonomous multi-scale measurement fusion without external knowledge dependencies at inference. Validated on four public benchmark datasets under diverse operating conditions, the framework achieves 98.49% diagnostic accuracy with a 12.6-fold reduction in computational cost relative to signal-level baselines. Interpretability analysis confirms that diagnostic feature activations align with established bearing fault mechanics, supporting measurement traceability in safety-critical industrial systems.
Vibration-based health monitoring of rotating machinery requires reliable fault diagnosis under operational data constraints, yet condition assessment remains challenged by structural scarcity of fault events and heterogeneous sim-to-real gaps in digital twin-generated signals. Each fault type generates impulses with distinct periodicity, amplitude modulation, and spectral character, making feature-space discrepancies fundamentally heterogeneous across fault classes. Existing domain adaptation methods apply a class-agnostic global transformation that cannot close all fault-specific gaps without distorting inter-class separability, while uniform source-target mixing introduces distributional noise into the data-abundant Normal class. These limitations stem from treating a sequential, state-dependent alignment problem as a one-shot optimization. Each corrective transformation simultaneously reshapes all class distributions, creating state dependencies that static gradient descent cannot resolve. We formulate feature alignment as a continuous-action Markov decision process solved via Proximal Policy Optimization, where the learned policy issues fault-type-specific affine corrections responsive to the current feature-space configuration, with a dual-objective reward balancing gap minimization against separability preservation. An asymmetry-aware strategy reserves real data for the Normal class while augmenting fault classes with policy-aligned simulated samples. Validation across XJTU-SY, CWRU, and a self-built slewing bearing testbed confirms the dominant gain from reinforcement learning-driven alignment, and cross-equipment linear probing achieves 92.8% without encoder retraining, demonstrating transferable monitoring capability.
Supervised learning models in the predictive maintenance field are regularly trained on highly imbalanced industrial datasets: machine failures occur rarely but have a disproportionate effect on operations. In addition to the clear class disparity, failure data are typically non-homogeneous, with different failure modes arising from distinct physical processes and exhibiting a multimodal distribution across minorities and classes. Traditional imbalance-management methods, e.g., undersampling, SMOTE-based interpolation, or cost-sensitive learning, typically assume that the minority population is homogeneous. This means their effectiveness is severely limited in the multifaceted conditions encountered in industrial practice. This paper determines the possibility of a failure-type-conscious generative augmentation program to improve the identification of infrequent failures in predictive maintenance systems. An experimental design that is leakage-safe is used to compare five imbalance-handling methods: cost-sensitive learning, random undersampling, SMOTE oversampling, single-generator GAN augmentation, and a specialized multi-generator GAN architecture that has independent generators that are asked to learn individual failure subtypes. Precision/Recall-oriented measures are used to quantify model performance; the main evaluation measure is the PR-AUC. Experiments conducted on the AI4I 2020 predictive maintenance dataset indicate that the proposed multi-generator GAN framework produces more realistic minority samples, yielding higher PR-AUC and recall scores compared to traditional resampling methods and individual-generator GAN augmentation.