Emergent Autonomous Drifting for Collision Avoidance in Real-World Winter Driving Scenarios
Authors: Elliot Weiss, Michael Thompson, Thomas Lew, John Subosits
Abstract
Real-world collision avoidance is a core motivation for studying the dynamics and control of high sideslip drifting in vehicles, yet the practical benefit of such maneuvers has so far primarily been tested in scenarios explicitly engineered to require drifting. In this work, we explore the question of if and when drifting may be optimal for safety in real-world winter driving conditions. We present a drift-capable nonlinear model predictive control (MPC) system designed to handle scenarios grounded in crash fatality data and deploy the controller in a high fidelity simulator across road departure and oncoming vehicle collision avoidance scenarios. The controller naturally initiates and sustains drifting maneuvers to stay on the road when hitting a patch of ice on the rear axle and to avoid an oncoming vehicle that has slid into its lane. Comparisons with a benchmark electronic stability control (ESC) system demonstrate how a drift-capable controller can trade off stability for controllability to precisely maneuver through dangerous winter driving scenarios. A Monte Carlo study over random ice patches further shows that the drift-capable controller achieves lower median lane error than ESC across several speeds, while revealing that drifting emerges predominantly at higher speeds.
Autonomously controlling and handling a vehicle at and beyond its stability limit is a mathematically and computationally demanding task. Prior demonstrations of automated drifting have been limited to research platforms with instantaneous torque delivery and independently actuated wheels, leaving their applicability to production vehicles with actuator latencies and mechanically coupled axles uncertain. To overcome these issues, we design a predictor to compensate for powertrain delays, develop a revised control formulation to accommodate higher actuation latencies as well as a differential coupling on the driven axle, and introduce brake-based velocity stabilization. This paper presents the controller framework, the model extensions, and real-world experimental results. We observe that our controller enables a production sports car with a combustion engine to robustly sustain circular and figure-eight drifts, limiting lateral error to 1.1 m and sideslip overshoot to 0.06 rad despite actuator delays exceeding 250 ms, while mitigating oscillations and maintaining stable path and sideslip tracking. In conclusion, our results establish that autonomous drifting is feasible on production-ready vehicles, opening pathways to advanced safety systems capable of stabilizing cars in scenarios where traditional control fails.
Frederik Werner, Till Heintzenberg, Markus Lienkamp +1
Control methods for emerging vehicle chassis architectures are important for autonomous driving near handling limits. Unlike conventional drift control, which relies on mechanical steering and rear-tire saturation, a steering-free four-wheel independently driven (4WID) vehicle can generate direct yaw moment through differential wheel torques. This paper proposes a differential-torque drift control method for such a vehicle. A double-track vehicle model incorporating four-wheel differential actuation is established, based on which a drift-equilibrium calculation method and a closed-loop drift controller are developed. The proposed approach is validated through simulations and experiments on a 1:10-scale vehicle. The results show that the vehicle can achieve steady circular drifting with a sideslip angle of approximately 20∘ and perform figure-eight drift tracking. This study demonstrates the feasibility of drift control using only differential wheel torques and provides a new perspective on near-limit control for steering-free vehicle architectures.
In Formula 1, drivers optimize racing lines within tire grip limits to minimize lap times; however, in rally racing, drivers intentionally break traction to drift on loose surfaces. This maneuver rapidly aligns the vehicle for corner exits, ultimately reducing lap time. Autonomously executing such maneuvers formulates a complex dual-objective control problem: stabilizing highly nonlinear drift dynamics while strictly minimizing lap time. Addressing this challenge motivates the development of advanced Minimum-Lap-Time (MLT) drift control architectures. This paper proposes a planning-control framework specifically designed for MLT drifting scenario. First, we formulate an optimal control problem to generate a MLT drift planning trajectory, which is used as prior data to train a deep reinforcement learning drift controller. Given that drifting involves extremely large sideslip angles and is therefore challenging to learn directly, a Track-guided Reinforcement Learning (TgRL) drift control method is proposed to enable progressive training in a step-by-step manner, from drift control policy, to drift corner policy, and finally to a comprehensive drift race policy. The reward function incorporates both an instant reward term and an end reward term derived from the Minimum-Lap-Time objective. Simulation results demonstrate that the proposed framework enables the agent to learn a drift racing policy that not only ensures vehicle motion control performance but also effectively reduces lap time.