While depth sensors have the potential to complement RGB data for affordance segmentation in wearable robots, their usage seems to remain underexplored. The paper proposes two approaches: a reformulated version of hardware-aware neural architecture search, endowed with a newly designed search space to integrate depth (D) information into small-sized deep networks, and a dedicated fine-tuning approach, including a preprocessing layer to merge depth information with RGB data and make it compatible with conventional architectures. In both cases, those methods aim to generate solutions that benefit from modern (portable) hardware accelerators and overcome existing tiny-like approaches, which often fail to tackle critical scenarios due to the severe constraints set by the supporting hardware. Extensive experiments on a pair of real-world datasets demonstrate the effectiveness of the proposed method as compared with existing solutions. The approach presented in the paper generates, in most cases, solutions that identify the Pareto optimal front to balance generalization performance and hardware requirements. The paper also describes the supporting prototype, including a Jetson Nano board and a RealSense RGB-D camera. When considering the energy profile of the device, the overall system can attain real-time performances within an energy budget that is compatible with standard batteries, such as those used in smartphones.
The deployment of deep neural networks for visual affordance segmentation on wearable robots poses may prove critical, due to some conflicting aspects of the problem. On one hand, affordance segmentation requires high-level abstraction capabilities, that typically involve large-size models. On the other hand, computing resources hosted on wearable robots prevent to run large-size models in real-time. The paper presents an analysis of the role of the segmentation head in the trade-off between generalization performance and compute cost. The obtained models outperform modern baseline solutions in well-known, real-world datasets while meeting low computing requirements.
Real-time perception is a foundational requirement for advanced driver assistance systems (ADAS) and autonomous vehicles, yet embedded automotive platforms impose severe constraints on compute, memory, and power. This paper presents an optimized semantic segmentation architecture derived from the RetinaNet detection framework, adapted for dense pixel-wise prediction and tailored for deployment on resource-constrained embedded hardware. The proposed architecture, termed Opt-RetinaSeg, replaces the standard ResNet-50 backbone with a hybrid lightweight feature extractor, restructures the Feature Pyramid Network (FPN) to reduce redundant multi-scale computation, and introduces a compact segmentation head guided by focal-loss-inspired class balancing to address the severe foreground-background imbalance common in road scenes. We further apply a three-stage optimization pipeline consisting of structured channel pruning, post-training INT8 quantization, and knowledge distillation from a high-capacity teacher network. Evaluated on the Cityscapes and BDD100K datasets and deployed on an NVIDIA Jetson Xavier NX and a Qualcomm QCS610 automotive SoC, the proposed model achieves 73.9% mIoU at 70.4 FPS, representing a 7.4x inference speedup and a 4x reduction in model size relative to the ResNet-50 baseline, with less than 3% accuracy degradation. These results indicate that RetinaNet-derived architectures, when systematically optimized, are viable candidates for real-time semantic segmentation in embedded automotive perception pipelines
Foundation-model-based monocular depth estimation offers a viable alternative to active sensors for robot perception, yet its computational cost often prohibits deployment on edge platforms. Existing methods perform independent per-frame inference, wasting the substantial computational redundancy between adjacent viewpoints in continuous robot operation. This paper presents AsyncMDE, an asynchronous depth perception system consisting of a frozen foundation model and a lightweight fast path that amortizes the foundation model's computational cost over time. The foundation model periodically produces high-quality spatial features in the background, while the lightweight fast path runs asynchronously in the foreground, fusing cached memory with current observations through complementary fusion, outputting depth estimates, and autoregressively updating memory. This enables cross-frame feature reuse with bounded accuracy degradation. With 3.83M trainable fast-path parameters and a 97.5M frozen slow path, AsyncMDE's fast path operates at 237 FPS on an RTX 4090, recovering 77% of the accuracy gap to the foundation model. Across indoor static, dynamic, and synthetic extreme-motion benchmarks, AsyncMDE degrades predictably and reaches 161 FPS fast-path inference on a TensorRT-optimized Jetson AGX Orin, supporting real-time edge deployment.