This paper addresses the sim-to-real gap in dynamics arising when a parallel-link mechanism is represented by a serial-tree surrogate in simulation. Conventional Jacobian-based state and torque mappings preserve consistency with the kinematic and virtual-work relations but do not account for the coordinate-induced redistribution of actuator inertia and damping and the linkage inertia omitted during serial-tree reduction. To address this gap, Simulator-Side System Normalization (S3N) is proposed to normalize the serial-tree simulator's effective dynamics while preserving its tree topology. S3N-Act incorporates actuator inertia and damping into the serial-coordinate dynamics through coordinate transformation, whereas S3N-Full restores residual linkage inertia by separately identifying actuator- and leg-level frequency responses. In the 2-DoF validation, S3N-Full reduced the joint-position and torque RMSEs by 80.9% and 82.1%, respectively, relative to the Jacobian-mapping baseline. During pitch-in-place motion, S3N-Act and S3N-Full reduced the RMSE of the ground reaction force norm by 65.1% and 62.4%, respectively. During circular locomotion, S3N-Full reduced the phase-averaged, command-normalized sim-to-real gap from 17.3% to 9.9%. These results show that simulator-side normalization improves motion- and force-level sim-to-real consistency. It enables policy training in a serial-tree framework with hardware-consistent dynamics that better represent the physical parallel-link mechanism.
Learning-based approaches to locomotion have risen in popularity in recent years, showing the capability for complex legged locomotion and whole-body control. Reinforcement learning (RL), the primary learning-based approach for locomotion, often utilizes a high-performance simulation tool, providing a controlled and efficient training and development environment. However, policies that perform well in simulation frequently encounter unexpected challenges when deployed on a physical system, known as the sim-to-real gap. This work presents a robust RL locomotion framework capable of whole-body control. The proposed RL framework utilizes Nvidia's new set of simulation tools, Isaac Sim, and its companion RL framework, Isaac Lab, for training, achieving a zero-shot sim-to-real policy. The performance of our policy is validated on physical hardware using the Unitree Go1, with experimental results showing similar velocity tracking performance to the quadruped's integrated controller, with a greater ability to recover from large disturbances, and achieve linear velocities of 2.0 m/s and angular velocities of 1.8 rad/s.
Bridging the sim-to-real gap is a central problem in robotics, and the prevailing approach is to build increasingly accurate simulators. Here, we propose another approach based on renormalization: using effective, resolution-dependent parameters to absorb details omitted by the simulator and reproduce real behavior. These parameters may differ from measured physical values because they compensate for what the simulator leaves out. We demonstrate this mechanism analytically for proportional--derivative (PD) control at finite simulation frequency, where proportional feedback changes the effective derivative gain and derivative feedback changes the effective inertia. We then interpret dynamic rope manipulation and underwater swimming through the same perspective. Finally, we present a practical procedure for choosing observables, identifying omitted physics, and determining effective parameters. Renormalization offers robotics a complementary path across the sim-to-real gap: effective parameters, real behavior.
Simulation is central to robot learning, yet the sim-to-real gap remains a major bottleneck. Existing approaches often tackle visual or dynamic gaps separately, overlooking how these individual mismatches accumulate and propagate throughout the robot's state evolution. In this paper, we introduce QuadVerse, an integrated framework that uses reconstructed scenes as a calibration substrate for aligning visual perception, physical interaction, and actuator dynamics. From captured RGB videos, we reconstruct geometry-constrained 3D Gaussian Splatting (3DGS) scenes that support batched photorealistic ego-view rendering and collision-ready semantic mesh extraction. The meshes further enable contact calibration by initializing spatially varying friction priors and refining them through trajectory-based posterior search. To address remaining actuator discrepancies, QuadVerse trains a residual dynamics compensator by replaying real-world trajectories on the contact-calibrated terrain, reducing the entanglement between terrain-induced contact errors and actuator non-idealities. Experiments show that QuadVerse improves reconstruction quality and locomotion tracking over relevant baselines. Leveraging this foundation, we demonstrate robust zero-shot visual-navigation policy deployment without task-specific real-world rollouts.