Adaptive-WAM: Quality-Guided Early-Exit Planning from Intermediate Video-Diffusion Features
Authors: Sining Ang, Yuguang Yang, Yan Wang
Organizations: Institute for AI Industry Research (AIR), Tsinghua University · Department of Automation, University of Science and Technology of China · School of Electronic Information Engineering, Beihang University
Large video diffusion models provide rich spatiotemporal priors for autonomous driving, but existing world-action models often inherit the cost of iterative future-video generation even though deployment only requires an ego trajectory. We ask a more basic question: how much of a video diffusion model must be executed to make a reliable driving decision? Through a controlled study of video denoising timesteps and Diffusion Transformer (DiT) depth, we find that planning performance is largely insensitive to the tested video-noise levels, whereas strong trajectories can already be decoded from intermediate layers. Based on this observation, we introduce Adaptive-WAM, a quality-aware multi-exit planner built on a Wan2.2-5B backbone. Trajectory diffusion heads are attached to selected DiT blocks, and a lightweight trajectory-quality scorer terminates inference once the best trajectory decoded so far satisfies a quality threshold; otherwise, computation continues from the cached hidden state to a deeper exit. The deployed planner therefore avoids the iterative classifier-free denoising loop and VAE decoding required for future-video synthesis, while dynamically allocating backbone depth according to trajectory quality. On NAVSIM, the adaptive single-trajectory planner achieves 90.8 PDMS; a separate fixed-exit variant reaches 92.6 PDMS with 64 proposals. It further obtains 89.9 EPDMS on NAVSIM v2, yielding the best reported results among the compared front-view video world-model planners. Without target-domain fine-tuning, Adaptive-WAM transfers to nuScenes with 0.88 m average L2 error and a 0.08% collision rate. On an A100, adaptive routing improves PDMS from 90.62 to 90.79 while averaging 170 ms end-to-end planning latency, approximately 10% below the 190 ms fixed block-15 planner and 47% below the 320 ms fixed full-depth planner. Code will be released.
World-Action Models (WAMs) improve end-to-end autonomous driving by transferring video dynamics priors to action prediction, but existing methods incur costly test-time future imagination. We present SimWAM, a simple yet effective WAM that leverages future-video prediction as a training-time supervision signal. It co-trains a pretrained video expert and a lightweight action expert with joint flow matching. An isolated attention mask keeps action prediction independent of future frames, allowing trajectory prediction without explicit future-frame generation at inference. Since the two experts share no parameters and interact only through a unified attention interface, the video backbone could be replaced and the action expert scaled independently without modifying the learning objective or inference pipeline. We further apply reinforcement learning to optimize a compositional driving reward beyond trajectory imitation. Our SimWAM achieves 91.5 PDMS on NAVSIM, surpasses state-of-the-art WAM-based planners with substantially lower latency, and transfers zero-shot to nuScenes. These results position SimWAM as a simple yet solid baseline that could readily benefit from advances in video generation for efficient autonomous driving. The code and model weights are available at https://github.com/H-EmbodVis/SimWAM/.
Generalization is a central challenge in autonomous driving, as real-world deployment requires robust performance under unseen scenarios, sensor domains, and environmental conditions. Recent world-model-based planning methods have shown strong capabilities in scene understanding and multi-modal future prediction, yet their generalization across datasets and sensor configurations remains limited. In addition, their loosely coupled planning paradigm often leads to poor video-trajectory consistency during visual imagination. To overcome these limitations, we propose DriveVA, a novel autonomous driving world model that jointly decodes future visual forecasts and action sequences in a shared latent generative process. DriveVA inherits rich priors on motion dynamics and physical plausibility from well-pretrained large-scale video generation models to capture continuous spatiotemporal evolution and causal interaction patterns. To this end, DriveVA employs a DiT-based decoder to jointly predict future action sequences (trajectories) and videos, enabling tighter alignment between planning and scene evolution. We also introduce a video continuation strategy to strengthen long-duration rollout consistency. DriveVA achieves an impressive PDM-based planning performance of 90.9 PDM score on the NAVSIM benchmark. Extensive experiments also demonstrate the zero-shot capability and cross-domain generalization of DriveVA, which reduces average L2 error and collision rate by 78.9% and 83.3% on nuScenes and 52.5% and 52.4% on the Bench2Drive built on CARLA v2 compared with the state-of-the-art world-model-based planner.
Pretrained driving vision-language models (VLMs) integrate visual, route, language, and driving context into rich driving priors, yet their representation objectives remain separated from continuous driving planning. Existing methods typically begin trajectory generation only after the VLM has formed a final condition, leaving depth-wise condition computation outside the stepwise formation of trajectory state. We introduce DiffAdapterVLA, which realizes Planning in the Backbone: it injects explicit trajectory tokens into selected VLM late layers, bringing trajectory state into backbone forward computation, where it co-evolves with driving conditions at different depths. Lightweight layer-wise DiffAdapters organize this computation into recursive trajectory refinement, while asymmetric joint attention preserves directed guidance from the condition stream to trajectory planning. By placing planning within existing backbone computation rather than relying on an independent trajectory planner, DiffAdapterVLA adapts only lightweight trajectory modules to turn existing driving priors into efficient continuous planning capability. NAVSIM results show that it achieves high-quality closed-loop planning with low end-to-end latency using few trainable parameters, and demonstrate that jointly evolving trajectory state and depth-wise driving conditions in VLM late-layer computation effectively realizes continuous trajectory planning.