Automated detection of subsurface cavities from Ground Penetrating Radar (GPR) is most difficult in soft, high-water-content ground, where conductive, water-saturated soil attenuates the signal and degrades cavity reflections, yet this is also the condition under which cavities most readily form. This paper proposes TriView-YOLO, a multi-view YOLOv12 detector for road cavity screening in such ground. Three co-registered views (longitudinal B-scan, horizontal C-scan, and cross-section B-scan) form a 9-channel input fused by a TripleInputConv layer that replaces the YOLOv12 stem; the rest of the network is unchanged, and bounding boxes are required on the longitudinal view only. Training used 1,600 expert-verified field samples, principally metropolitan road surveys of Bangkok, Thailand, acquired with a vehicle-mounted multichannel three-dimensional GPR mobile mapping system, with surveys over the firmer subgrades of Japan added to training and validation only. The test set comes exclusively from the Bangkok surveys, over soft marine clay with 80-140% water content and a water table at 1-2 m depth, a ground condition for which no dedicated deep learning cavity-detection evaluation has been reported. On this unaugmented, field-only test set, split randomly within surveys, the proposed model attains mAP50 of 0.558 +/- 0.028 over three seeds at 23.6 GFLOPs and 3.1 ms per image. Ablations show that removing the auxiliary views lowers mAP50 and recall, whereas public and synthetic training images, DINOv3 features, larger model scale, and COCO pretraining bring no gain.
Clandestine tunneling beneath oil and gas pipelines enables fuel theft, smuggling, and sabotage, yet conventional monitoring detects damage only after a pipeline has been compromised. Ground-penetrating radar (GPR) can image such tunnels non-invasively, but manual radargram interpretation does not scale to continuous corridor surveillance, and supervised detectors require tunnel examples that are scarce in practice. We present a fully unsupervised detection pipeline trained exclusively on normal subsurface radargrams collected at a purpose-built field site containing three buried tunnels at 1.5-3 m depth. A denoising convolutional autoencoder learns the structure of anomaly-free ground; at inference, tunnels are flagged by reconstruction error. Our central contribution is a depth-restricted top-k anomaly score, which pools the highest reconstruction errors only within the depth band where tunnels can physically occur. This physically motivated rule raises AUC from 0.986 to 0.994 and cuts missed detections from 74 to 17 of 634 tunnel windows, relative to whole-image scoring, without any retraining or labels. We further show that the optimal top-k fraction interacts with the depth restriction - 1% pooling is best on full images, 5% once scoring is depth-restricted - and that spatial voting across overlapping survey windows helps weak per-image detectors but offers no benefit once the scoring rule is strong. The final system attains AUC 0.994, F1 0.975, recall 0.973, and precision 0.976 on 1,600 field test windows spanning 55 survey lines, at a 1.6% false-alarm rate, using no tunnel labels for training, scoring, or threshold calibration.
How far can 3D object detection go using 4D radar alone? Despite offering weather-robust and velocity- aware sensing for autonomous perception, modern 4D radar still yields sparse, noisy, and unstable point clouds, limiting radar-only 3D detection. We present HyperDet, a detector- agnostic input enhancement pipeline that constructs task- aware hyper 4D radar point clouds by combining measured observations with completed foreground geometry. HyperDet first refines short-window surround-view radar observations through spatio-temporal accumulation and cross-sensor val- idation, while Doppler-guided motion compensation reduces dynamic object trails when motion can be estimated reliably. It then performs foreground generative enhancement using LiDAR-guided pseudo-radar supervision available only during training, enriching object geometry while preserving measured radar background and radar-native attributes. During detec- tor training, radar-aware object-level augmentation maintains Doppler consistency under geometric relocation. At inference, HyperDet requires radar input alone and can be directly paired with standard 3D detectors. Experiments on two public surround-view 4D radar datasets demonstrate consistent im- provements over matched temporal accumulation across stan- dard 3D detectors, validating input-level radar enhancement as an effective approach to radar-only 3D detection.
Crack detection plays an important role in infrastructure inspection and Structural Health Monitoring (SHM). However, cracks typically appear as thin, low-contrast structures and are easily affected by background noise, posing challenges for existing object detection models. This study proposes an improved YOLO-based architecture with integrated attention mechanisms, termed YOLO-AMC (YOLO with Attention Mechanisms for Crack Detection), to enhance automated crack detection performance. Based on YOLOv11, the original C2PSA module is removed, and multiple attention mechanisms, including Global Attention Mechanism (GAM), Residual Convolutional Block Attention Module (Res-CBAM), and Shuffle Attention (SA), are introduced into the multi-scale feature fusion layers of the Neck to strengthen cross-scale feature integration. Experimental results demonstrate that YOLO-AMC consistently outperforms baseline models YOLOv11n and YOLOv8n across multiple evaluation metrics. Among the evaluated attention modules, GAM achieves the best detection performance, obtaining mAP@0.5 = 0.9917 and mAP@0.5:0.95 = 0.9506 on the test dataset, which are higher than those of YOLOv11 (0.9833 / 0.9112) and YOLOv8 (0.9707 / 0.8921). Furthermore, while maintaining a computational complexity of 7.6 GFLOPs, the proposed model achieves 110.95 FPS on an NVIDIA RTX 4090 platform and approximately 5 FPS on a Raspberry Pi 5 edge device, demonstrating a favorable trade-off between accuracy and deployment efficiency. The implementation code for this study is available on GitHub at https://github.com/CY-Tsai24/YOLO-AMC.