Entanglement-Free Trajectory Planning for Tethered Mobile Robots with a Slack Tether
Authors: Gianpietro Battocletti, Dimitris Boskos, Bart De Schutter
Organizations: Delft Center for Systems and Control, Delft University of Technology, Delft, The Netherlands
Abstract
In motion planning algorithms for tethered mobile robots, the entanglement state of the tether is a critical aspect to consider during the planning phase. This is particularly important in case of a slack tether, where the shape of the tether is not determined solely by the geometry of the environment and the location of the obstacles, but also by the dynamics of the tether, by the trajectory followed by the robot, and possibly by exogenous forces. In this scenario, preventing entanglement requires planning a robot trajectory that accounts for the entanglement definition and for the dynamics of the robot and of the tether. In this work, we propose a motion planning algorithm for tethered mobile robots with a slack tether that computes dynamically feasible entanglement-free trajectories to navigate through an environment with static obstacles. By considering the entanglement state during all the stages of the planning pipeline, we are able to compute safer trajectories that avoid entanglement during the motion of the robot. We achieve this through a three-step pipeline, which includes (i) the construction of a topological model of the entanglement-free configuration space of the tethered robot, (ii) the generation of a set of candidate paths using this model, and (iii) the computation of a dynamically feasible entanglement-free trajectory by solving a homotopy-constrained trajectory generation problem. The resulting trajectory can then be executed to lead the robot to its target location, while maintaining the tether in an entanglement-free configuration. We demonstrate the benefits of this algorithm in simulations, where we show how the planning algorithm avoids violations of the entanglement constraints, resulting in safer and more reliable trajectories.
This letter presents the first method for autonomous exploration of unknown cavities in three dimensions (3D) that focuses on minimizing the distance traveled and the length of tether unwound. Considering that the tether entanglements are little influenced by the global path, our approach employs a 2-level hierarchical architecture. The global frontier-based planning solves a Traveling Salesman Problem (TSP) to minimize the distance. The local planning attempts to minimize the path cost and the tether length using an adjustable decision function whose parameters play on the trade-off between these two values. The proposed method, TAPE, is evaluated through detailed simulation studies as well as field tests. On average, our method generates a 4.1% increase in distance traveled compared to the TSP solution without our local planner, with which the length of the tether remains below the maximum allowed value in 53% of the simulated cases against 100% with our method.
Motion planning algorithms compute control sequences that drive autonomous robots to goal regions while avoiding unsafe states. Existing methods, from sampling-based planning to deep reinforcement learning, typically provide task-completion guarantees only with respect to a nominal model or simulator, which may be invalidated when the true dynamics are unknown or difficult to model accurately. This letter addresses this limitation for systems with unknown dynamics and an available approximate nominal model, contributing a planner-agnostic constraint-tightening procedure that equips existing planners with a probabilistic task-completion guarantee on the true system. We leverage conformal prediction to provide a probabilistic bound on the nominal-to-true trajectory deviation over a distribution of planning problems. We tighten the planning constraints using that bound, and show that solving the tightened problem under the nominal model is a sufficient condition for solving the original problem on the true system with a prescribed probability. We validate the theoretical guarantees empirically and demonstrate substantially improved task completion relative to nominal-model planning.
Motion planning for rigid-body assembly poses a fundamental challenge in robotics due to tight geometric constraints. In such scenarios, feasible motions often require passing through (near-)zero clearance configurations in which the parts are tightly constrained by contact. In this work, we introduce Critical-Manifold Guided RRT (CMG-RRT), a sampling-based planner designed specifically for tight assembly problems. Our key observation is that in tight assemblies, valid solution paths lie on or near a critical manifold: the subset of configuration space consisting of poses with at least one contact point between parts. CMG-RRT guides exploration by adaptively biasing sampling toward neighborhoods of the critical manifold using a hierarchical subdivision of the configuration space. We prove that CMG-RRT is probabilistically complete under standard clearance assumptions. Empirical evaluation on challenging rotational assembly benchmarks demonstrates a 100% success rate across all tested instances, including, to the best of our knowledge, the first fully automatic solution of the Elk disentanglement puzzle. Our open source software is available through our project page: https://www.cgl.cs.tau.ac.il/projects/tight-assembly-planning.
Dror Livnat, Michael M. Bilevich, Michal Kleinbort +1