Real-world robotic assembly at sub-millimeter tolerances demands spatial precision, compliant interaction, and robustness to contact failures. We present Facet-0, a robotic foundation model that predicts and values the contact consequences of its actions. Facet-0 unifies multimodal representation learning and reinforcement learning (RL) post-training around a joint action-wrench proposal: a causal wrench history is aligned with vision-language semantics and kinematic state, and flow matching generates each action chunk together with the future wrist-wrench profile it is expected to induce. Deployment rollouts train a distributional Action-Wrench Critic to distinguish motions with similar task progress but different contact outcomes, while phase-aware rewards and contact-selective credit concentrate policy improvement on decisive interactions. To accommodate part-specific dynamics, a lightweight bounded actor reuses the frozen representation for on-robot adaptation; RL remains defined over executable Cartesian actions, while an auxiliary wrench head preserves predictive, non-commanded action-contact coupling. Trained on ManuFacet-1K, a 1,000-hour force-synchronized corpus spanning three embodiments and multiple manufacturing cells, the bounded task-adapted system reaches 82% mean success on five sub-millimeter computer-assembly tasks, compared with 15% for the strongest baseline, with 0.5 mm placement accuracy and 50 ms command latency.
Contact-rich precision insertion is a key manipulation skill in robotic assembly. Tight clearances make insertion more sensitive to alignment errors and prone to collisions and jamming, while variations in geometry and clearance across parts further complicate policy reuse. We present a reinforcement learning framework that trains insertion policies entirely in simulation for direct deployment without real-world demonstrations or policy fine-tuning. By combining target poses with compact three-dimensional fingertip force feedback, the policy learns to search for alignment and correct its motion despite errors in the estimated hole position. A decoupled gated reward coordinates alignment and insertion. Force-signal smoothing and state-independent standard deviations stabilize the learning process. The resulting policies perform real-world insertion across multiple hole geometries with a minimum nominal clearance of 0.02 mm and improve success while reducing peak contact forces under hole-position errors. Cross-clearance and cross-geometry evaluations further confirm policy generalization. The system achieved the first perfect score of 20/20 on ManipulationNet's peg-in-hole benchmark under its Human-in-the-Loop protocol, with fully autonomous insertion motions. A single policy trained only on a simulated hexagonal insertion task achieved an overall success rate of 95.0% across eight unseen real-world insertion tasks. These results show that learning entirely in simulation can yield precision insertion skills that can be deployed directly and reused across real-world tasks. The project website (https://mzhsoul.github.io/InsertAnything/) provides open-source simulation and real-robot experiment scripts, assets, and trained checkpoints.
Force signals provide critical interaction cues for contact-rich robotic manipulation. However, existing methods mostly use force as an additional observation modality, without fully exploiting its role in modeling future interaction dynamics or guiding execution-time feedback correction. In this paper, we propose FAWAM, a force-aware world action model that incorporates force information at three levels: perception, prediction, and closed-loop execution. FAWAM first encodes historical 6-axis force/torque signals to modulate action generation, then jointly predicts future actions and end-effector wrenches to explicitly model contact evolution. It further introduces a residual correction module that uses the predicted wrench trajectory as an execution-time reference to refine actions online based on real-time force feedback. Real-world experiments across multiple contact-rich tasks show that FAWAM improves the average success rate by 36.25% over vision-only baselines and 21.25% over existing force-aware baselines, demonstrating the effectiveness of our force-aware framework for robust contact-rich manipulation.
Contact-rich assembly remains challenging because it requires submillimeter spatial accuracy and reliable interpretation of forces during sustained contact. Although simulation-based reinforcement learning offers a scalable training paradigm, discrepancies in visual observations, contact dynamics, and force/torque (F/T) measurements often limit policy transfer. We observe that proprioception is comparatively consistent across domains because joint positions are expressed in a shared calibrated coordinate system and joint velocities are computed consistently in simulation and on hardware. Based on this observation, we present PACE (Proprioception-Anchored Cross-Modal Encoder), which supervises temporal visual and F/T representations by predicting proprioceptive state transitions. Static domain-specific factors, including lighting, texture, and sensor bias, contain little information about joint motion; optimizing the proposed objective therefore suppresses their influence on the learned representation while retaining task-relevant motion cues. Policies trained on frozen PACE features are directly deployed on hardware without real-world fine-tuning or object-pose tracking. Across four contact-rich assembly tasks, PACE attains an average real-world success rate of 93.3% and only a 2.7-percentage-point sim-to-real drop, while remaining robust to perturbations that substantially degrade pose-based and learned-fusion baselines.