Differences in vehicle kinematic characteristics between production autonomous vehicles (PAVs) and human-driven vehicles (HVs) have been limitedly investigated by empirical studies. Most recent studies rely on simulation-based models, while some further investigate low-level adaptive cruise control (ACC) systems in controlled experiments. These methods commonly adapt some time-domain metrics to characterize PAV-HV differences across limited driving conditions. However, current PAVs equipped with high-level autonomous driving systems generate driving behaviors in a black box using data-driven models. These fundamentally different mechanisms for generating behaviors may produce distinct kinematic characteristics in traffic. More importantly, these time-domain metrics cannot reflect frequency-related traffic dynamics across different driving scenarios. Thus, this study adapted a real-world PAV dataset with four PAV platforms and developed a frequency-domain framework to quantify kinematic differences between PAVs and HVs across diverse driving scenarios, including varying driving states, lighting, weather, and vehicle densities. The framework transforms kinematic signals into the frequency domain and extracts spectral features, and then compares these features between PAVs and HVs based on kernel density estimation and Wasserstein distance. The results reveal clear scenario-dependent PAV-HV spectral differences. Specifically, speed-related differences were consistently smaller during car-following than cruising, while rainy conditions consistently enlarged acceleration-related differences compared with clear conditions. These findings highlight the necessity of multi-scenario evaluations and demonstrate the value of frequency-domain analysis for characterizing PAV-HV kinematic differences under real-world conditions.
Inefficient driving behaviors, such as overly conservative yielding, remain a key obstacle to deployment of autonomous vehicles (AVs). Instantaneous driving efficiency metrics are crucial for self-driving decision-making because they affect real-time performance evaluation and control optimization. However, commonly used indicators, including speed, relative speed, and inter-vehicle distance, are limited in capturing traffic context and in ensuring consistency between instantaneous outputs and travel-level outcomes. This study proposes the Projected Attainable Speed Space (PASS) model, a unified framework for driving efficiency assessment across instantaneous and travel-level analyses by integrating kinematic and spatial traffic information. PASS characterizes instantaneous driving efficiency with two coupled elements: potential for speed improvement (available acceleration space) and response to that potential (utilization of available acceleration space). Available acceleration space is referenced to projected attainable speed, derived from an idealized catch-up maneuver using relative speed and spacing to the leading vehicle; utilization is represented by the temporal change in available acceleration space. To ensure cross-scale consistency, time-aggregated PASS is defined as a travel-level efficiency metric. Trajectory data from a driving simulation experiment are used for parameter calibration to maximize agreement between time-aggregated PASS and observed travel times. Across 10 lane-change events, results show strong consistency, with an average coefficient of determination of 0.913, validating PASS for consistent efficiency evaluation across instantaneous and travel-level temporal scales. This study provides a unified, physically grounded framework that supports real-time decision-making and long-term performance analysis in autonomous driving.
Autonomous vehicles (AVs) are widely known to follow conservative, rule-based motion policies that surrounding drivers can learn to anticipate. A direct consequence is that human drivers may accept shorter longitudinal gaps when cutting in front of an AV than when targeting another human-driven vehicle (HDV). We test this hypothesis using the Waymo Open Motion Dataset (WOMD), which provides 25,906 real-world highway scenarios at 10 hertz. An eight-criterion lane-change detector extracts 706 HDV-to-AV and 3,172 HDV-to-HDV cut-in events from the same traffic environment. The median accepted gap in front of the Waymo AV is 7.58 meters versus 9.57 meters for HDV targets, a 1.99 meter reduction that is statistically significant (p equals 5.76 times 10 to the negative eighth power, d equals negative 0.224) and persists under speed-matched resampling. Cut-in speeds toward the AV are 37 percent higher (51.7 versus 37.7 kilometers per hour, d equals 0.502), and 68.0 percent of AV-targeted cut-ins occur below the 10 meter gap boundary versus 51.8 percent of HDV-targeted events (chi-squared equals 60.5, p is less than 10 to the negative thirteenth power). These results reveal a systematic and safety-relevant asymmetry in human gap-acceptance behavior that warrants AV-specific calibration of both motion-planning safety envelopes and traffic simulation models.
As automated vehicles (AVs) increasingly share roadways with human-driven vehicles (HDVs), understanding how pedestrians respond to different vehicle types in safety-critical interactions is essential for the safe deployment of automated driving technologies. This study extracts safety-critical pedestrian-vehicle interactions from the Argoverse 2 dataset to capture real-world crash avoidance behaviors in encounters involving AVs and HDVs. To model vehicle-type-specific pedestrian crash avoidance behavior, we develop a Smooth-Mamba Deep Deterministic Policy Gradient framework, termed SMamba-DDPG, which integrates smooth action constraints with efficient temporal representation learning. To quantify pedestrian behavioral differences, the framework trains separate crash avoidance policies for pedestrian interactions with AVs and HDVs. Results show that SMamba-DDPG outperforms baseline reinforcement learning and supervised learning models in reproducing pedestrian crash avoidance behaviors. Reconstructed trajectories demonstrate strong behavioral realism, accurately reproducing crash avoidance kinematics in both AV and HDV scenarios. Reaction time analysis shows that the model captures human-like response delays and reveals that pedestrians respond more quickly to AVs than to HDVs. Counterfactual analysis further indicates that pedestrians adopt lower crossing speeds when interacting with AVs. Large-scale safety analysis of model-generated data revealed that pedestrian-AV interactions consistently yielded lower conflict rates and higher pedestrian yielding rates compared to pedestrian-HDV interactions. The findings highlight the importance of incorporating vehicle-type-specific pedestrian behavioral models for safer automated driving system design and more realistic traffic simulations in mixed-traffic environments.