Robust Underwater Grasping of Sloped Objects with a Waterproof Passive Adaptive Gripper

Underwater manipulation often occurs under degraded visibility due to turbidity, glare, and gripper occlusion, limiting the reliability of vision-based perception during approach and grasping. In such settings, soft grippers are well suited for compliant interaction, but they typically lack an onboard pre-contact cue that can guide approach and closure when vision is unreliable. This extended abstract explores active electrosense as a lightweight sensing modality that can provide a proximity-like signal prior to contact by measuring perturbations of an applied electric field in conductive media. We instrument an octopus-inspired gripper with a discrete electrode layout and record multi-channel sensing voltages using off-the-shelf hardware. Simulation and tank experiments with a suspended conductive sphere show structured, object-dependent changes in the multi-electrode voltage readout relative to empty-water baselines, with detectability varying across excitation of 5 to 20 V and frequencies from 1 mHz to 1 kHz. These findings motivate systematic investigation of gripper-integrated electrosense as a complementary pre-contact cue for underwater soft manipulation.

This paper presents an innovative design and stability analysis of an underactuated robotic finger with spatial mobility, designed to enhance gripping dexterity in robotic hands. The finger architecture incorporates a revolute joint at its base, enabling passive spatial rotation that facilitates both cylindrical and spherical grasping. With only two phalanges per finger, the design simplifies kinematic complexity while supporting precision and enveloping grasps. Stability criteria, based on the moment at the finger base joint induced by contact forces, are introduced to ensure reliable object gripping and prevent ejection during manipulation. The study also examines a differential mechanism that distributes a single actuation torque across multiple fingers, allowing adaptive and coordinated motion. This mechanism enhances the hand's ability to grasp diverse object shapes with minimal pre-grasp adjustments, leveraging passivity for autonomous adaptation. Theoretical findings are experimentally validated using a fully mechanical prototype, demonstrating versatility in performing cylindrical, spherical, parallel, and enveloping grasps. The integration of underactuation-both within individual fingers and among multiple fingers-reduces mechanical complexity, cost, and control demands while preserving functional adaptability. This work advances the development of compliant robotic hands suitable for applications requiring dexterity and robustness, such as agricultural robotics, logistics, assistive technologies, and waste sorting. Future research will focus on automating actuation and refining control strategies to further improve grasp stability and precision, paving the way for autonomous manipulation in unstructured environments.

Robots are increasingly used in unstructured environments. The need for them to safely grasp unknown objects without damaging them becomes crucial. Humans achieve this by sensing and quickly responding by adjusting their grasping force. Similarly, effective grasp acquisition in robots requires compliant interaction strategies that can adapt to uncertain object properties and adjust to any instabilities during manipulation. We present a geometry-aware force/torque-based contact estimation method for a coarse position-controlled gripper, combined with an adaptive admittance controller for safe grasp acquisition. The desired contact forces are estimated online to keep stable contact with objects of unknown properties. This enables compliant and stable grasps while avoiding excessive forces. Experiments with objects of different sizes, shapes, stiffnesses, and weights show that the proposed algorithm not only prevents slippage but also applies minimal force to safely grasp an object without causing excessive deformation.