Road tunnels remove satellite visibility where connected and automated vehicles still require continuous, attributable, and integrity-bounded positioning. This Point of View argues that tunnel localization should be treated as infrastructure-assisted cross-modal track continuity, not as extrapolation from the last trusted satellite fix. A trusted portal satellite solution provides the global anchor, distributed acoustic sensing (DAS) continuous motion evidence, cameras sparse identity and lane anchors, onboard sensing short-term dynamics, and edge computing association, fusion, integrity monitoring, and guarded reacquisition. Ground truth is reserved for offline calibration and validation. The article develops a falsifiable research and deployment agenda for progressing from synchronized multimodal evidence to validated, integrity-aware tunnel positioning continuity.
To address cumulative localization drift of unmanned ground vehicles in structured road environments under severe Global Navigation Satellite System signal occlusion, this paper proposes a robust route-constrained state estimation method. During periods without satellite signals, the proposed method establishes the correspondence between the historical dead reckoning trajectory and local segments of the mission route extracted from a high-definition map, and estimates a route-referenced position via a two-dimensional rigid transformation. The estimated position is then formulated as a pseudo-position observation and incorporated into an Extended Kalman Filter update. In this way, route constraints at the road level can be continuously injected into a unified state estimation framework, thereby suppressing position deviation relative to the mission route while indirectly improving azimuth estimation. To enhance practical applicability, engineering strategies, such as trigger control, matching quality validation, route offset compensation, and single update correction limiting, are further introduced. Experiments in three representative scenarios, including a long tunnel, a multi-segment tunnel, and a curved tunnel, show that the proposed method effectively suppresses error accumulation during satellite outages, reduces the risk of large maximum deviation, and improves localization continuity and road-level usability.
Cross-View Geo-localisation (CVGL) matches ground imagery against satellite tiles to give absolute position fixes, an alternative to GNSS where signals are occluded, jammed, or spoofed. Recent fine-grained CVGL methods regress sub-tile metric pose, but have only been evaluated as one-shot localisers, never as the primary fix in a live pipeline. Inertial sensing provides high-rate relative motion, but accumulates unbounded drift without an absolute anchor. We propose TACO, a tightly-coupled IMU + fine-grained CVGL pipeline that consumes a single GNSS reading at start-up and thereafter operates on onboard sensing alone. A closed-form cross-track error model triggers CVGL before IMU drift exceeds the matcher's capture radius, and a forward-biased five-point multi-crop search keeps inference cost fixed at five forward passes per fix. A yaw-residual gate rejects fixes that disagree with the onboard compass, and an anisotropic body-frame noise model scales each Unscented Kalman Filter update by per-fix confidence. A factor graph with vetted loop closures provides an offline smoothed trajectory. On the KITTI raw dataset, TACO reduces median Absolute Trajectory Error (ATE) from 97.0m (IMU-only) to 16.3m, a 5.9 times reduction, at <0.1 ms per-frame fusion cost and a 5-10% camera duty cycle. Code is available: github.com/tavisshore/TACO.
Localization for autonomous vehicles on highways remains under-explored compared to urban roads, and state-of-the-art methods for urban scenes degrade when directly applied to highways. We identify key challenges including environment changes under information homogeneity, heavy occlusion, degraded GNSS signals, and stringent downstream requirements on accuracy and latency. We propose a robust localization system to address highway challenges, which uses a dual-likelihood LiDAR front end that decouples 3D geometric structures and 2D road-texture cues to handle environment changes; a Control-EKF further leverages steering and acceleration commands to reduce lag and improve closed-loop behavior. An automated offline mapping and ground-truth pipeline keep maps fresh at high cadence for optimal localization performance. To catalyze progress, we release a public dataset covering both urban roads and highways while focusing on representative challenging highway clips, totaling 163 km; benchmarking is standardized using product-oriented accuracy metrics and certified ground truth. Compared to Apollo and Autoware, our system performs similarly on urban roads but shows superior robustness on challenging highway scenarios. The system has been validated by more than one million kilometers of road testing.