Organizations: University of Calgary, Department of Mechanical Engineering, 2500 University Drive NW, Calgary, AB, Canada · Munich Institute of Robotics and Machine Intelligence (MIRMI), Technical University of Munich (TUM), Germany
Legged robots have demonstrated a remarkable ability to traverse various terrains, yet generating effective loco-manipulation behaviors remains challenging. A key difficulty is that object and terrain parameters are typically unknown to the robot, and mismatches between these parameters and their simulated counterparts introduce a sim-to-real gap that degrades control performance. Classical system identification (Sys-ID) methods often assume differentiable dynamics, an assumption that does not hold for contact-rich legged systems. Sampling-based Sys-ID avoids this restriction by directly matching simulated and recorded state trajectories through massively parallel rollouts, but existing approaches are typically applied offline and do not adapt as environmental conditions change. We present Adaptive-MHE an online sampling-based Sys-ID framework, based on moving horizon estimation (MHE), that estimates the physical parameters of objects and terrain in the environment (e.g., mass, friction) and couples this estimate with a sampling-based model predictive controller, enabling adaptive loco-manipulation in changing and uncertain environments. In simulation and hardware experiments, our framework consistently outperforms baselines and matches the performance of a controller with access to ground-truth parameters.
Legged manipulators integrate exceptional terrain adaptability along with mobile manipulation capabilities, which make them highly promising for deployment in human-centric environments. By coordinating the control of both legs and arms, a whole-body controller can significantly expand the operational workspace of legged manipulators. However, many existing whole-body controllers primarily depend on proprioception and do not incorporate the critical exteroception required for effective terrain topology perception. This limitation can hinder their ability to adapt to varying environmental conditions and navigate complex terrains effectively. In this paper, we introduce TA-WBC, a terrain-aware whole-body control framework for legged manipulators, which features a novel RL-based unified policy tailored to whole-body loco-manipulation tasks in various terrains. Specifically, we employ a \rev{hierarchical exteroceptive encoder} to extract terrain features, providing an essential basis for the robot to proactively adapt posture and footholds. Furthermore, to facilitate stable cross-terrain loco-manipulation, we propose a novel end-effector sampling method based on the foot contact plane, \rev{decoupling the manipulation target from base height, roll, and pitch variations}. Moreover, a dual-policy distillation module is introduced to integrate expansive whole-body motion with terrain adaptability without catastrophic forgetting. The simulation and real-world experiments validate the robustness of our proposed controller, which leads to a larger reachable space, less tracking error, and reduced unexpected stumbles. This unified policy highlights the promising capabilities of legged manipulators in performing loco-manipulation tasks across complex terrains.
This paper presents a sim-to-real approach that enables legged robots to dynamically manipulate large and heavy objects with whole-body dexterity. Our key insight is that by performing test-time steering of a pre-trained whole-body control policy with a sample-based planner, we can enable these robots to solve a variety of dynamic loco-manipulation tasks. Interestingly, we find our method generalizes to a diverse set of objects and tasks with no additional tuning or training, and can be further enhanced by flexibly adjusting the cost function at test time. We demonstrate the capabilities of our approach through a variety of challenging loco-manipulation tasks on a Spot quadruped robot in the real world, including uprighting a tire heavier than the robot's nominal lifting capacity and dragging a crowd-control barrier larger and taller than the robot itself. Additionally, we show that the same approach can be generalized to humanoid loco-manipulation tasks, such as opening a door and pushing a table, in simulation. Project code and videos are available at https://sumo.rai-inst.com/.
Designing an open-world quadrupedal loco-manipulation system is highly challenging. Traditional reinforcement learning frameworks utilizing exteroception often suffer from extreme sample inefficiency and massive sim-to-real gaps. Furthermore, the inherent latency of visual tracking fundamentally conflicts with the high-frequency demands of precise floating-base control. Consequently, existing systems lean heavily on expensive external motion capture and off-board computation. To eliminate these dependencies, we present SigLoMa, a fully onboard, ego-centric vision-based pick-and-place framework. At the core of SigLoMa is the introduction of Sigma Points, a lightweight geometric representation for exteroception that guarantees high scalability and native sim-to-real alignment. To bridge the frequency divide between slow perception and fast control, we design an ego-centric Kalman Filter to provide robust, high-rate state estimation. On the learning front, we alleviate sample inefficiency via an Active Sampling Curriculum guided by Hint Poses, and tackle the robot's structural visual blind spots using temporal encoding coupled with simulated random-walk drift. Real-world experiments validate that, relying solely on a 5Hz (200 ms latency) open-vocabulary detector, SigLoMa successfully executes dynamic loco-manipulation across multiple tasks, achieving performance comparable to expert human teleoperation.