FAR-LIO: Enabling High-Speed Autonomy through Fast, Accurate, and Robust LiDAR-Inertial Odometry

LiDAR-inertial odometry (LIO) is a key component of autonomous navigation, but high-dynamic driving exposes two coupled challenges: intra-scan motion distortion and vibration-contaminated inertial measurements. Most real-time LiDAR-inertial pipelines propagate the system state by integrating raw IMU measurements and then use the propagated trajectory for point cloud de-distortion, thereby propagating inertial noise into both the corrected scan and the subsequent scan-to-map registration. This paper presents WNOJ-LIO, a LiDAR-IMU fusion framework based on a White-Noise-on-Jerk (WNOJ) Extended Kalman Filter (EKF). WNOJ-LIO employs a decoupled WNOJ prior on $\R^3 \times \SO(3)$ for state prediction and treats the IMU as a high-frequency measurement source rather than the driver of state propagation. The resulting posterior state history is then used for LiDAR scan de-distortion and subsequent point-to-plane LiDAR updates. The decoupled process model enables closed-form covariance propagation, thereby bridging the gap between batch WNOJ Gaussian process (GP) trajectory priors and recursive filtering. Simulation results demonstrate improvements in acceleration and angular-velocity denoising, scan de-distortion, and localization accuracy over a FAST-LIO-style baseline. Real-world experiments were conducted using an autonomous racing car on four driving segments with maximum speeds ranging from 53 to 208~km/h, covering a wide range of vehicle vibration levels. The experiments further validate the proposed method and provide a comprehensive evaluation of its performance in estimating acceleration, angular velocity, body-frame linear velocity, attitude, and position under highly dynamic driving. The source code of WNOJ-LIO is publicly available at https://github.com/LvJohny/wnoj-ekf-lio.git.

LiDAR Inertial Odometry (LIO) is a critical component for many mobile robots that need to navigate without relying on external positioning (e.g., GPS). Platforms that operate autonomously in different environments and with heterogeneous LiDAR sensors require a LIO approach that can adapt to these different scenarios without human intervention. Existing LIO approaches can typically provide reliable and accurate odometry in scenarios with similar environments and sensors when suitably tuned. However, many approaches struggle to retain robust odometry across heterogeneous environments and sensors while using a consistent configuration. This paper presents EllipseLIO, a real-time LIO approach that generalises between scenarios by using methods for LiDAR scan filtering and registration that adapt to the sensor capabilities and environment without requiring scenario-specific tuning. Experiments with EllipseLIO and state-of-the-art LIO approaches on five datasets with diverse and challenging scenarios demonstrate that EllipseLIO is the best-performing approach overall. It achieves a 38% lower odometry error on average than the second-best approach and is the only approach that does not diverge in any experiment. An open-source version of EllipseLIO will be available at github.com/v4rl-ucy/ellipselio.

Open-source LiDAR-inertial odometry (LIO) systems have achieved remarkable benchmark accuracy, yet current state-of-the-art implementations are primarily optimized for evaluation performance rather than the requirements of real-time closed-loop aerial control. When deployed onboard UAVs, this can introduce limitations that degrade flight performance. In this work, we identify five architectural deficiencies in a representative tightly coupled IESKF-based LIO implementation: odometry publishing tied to the LiDAR rate (10 Hz instead of the IMU's 200 Hz), missing velocity outputs, execution bottlenecks that block IMU processing, mutex contention, and synchronization race conditions. We introduce corresponding modifications including IMU-rate forward propagation, direct body-frame velocity publishing, SLERP-based smoothing, dual-executor isolation, and explicit synchronization protection. The resulting system increases odometry output from ~10 Hz to a stable 200 Hz, provides a complete Twist state at every IMU sample, and preserves continuity during transient LiDAR loss. Experiments on a Livox Mid-360 / Pixhawk 4 Mini autonomous UAV with motion-capture ground truth validate the approach. Since the underlying estimator (IESKF + ikd-Tree) remains unchanged, the proposed improvements can be directly applied to FAST-LIO2-derived implementations.